A candelabra for several candles or lamps. Excludes: MENORAH
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED04707*)
ASXHJVOLTAGE RATING IN VOLTS
THE VOLTAGE RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASXHJCA2.0*;ASXHJCA2.0$JCA2.0*;ASXHJCA2.0$$JCA2.1*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3ABEDCLD000*;MATT3ABEDCLD000$DPCAJ00*;MATT3ABEDCLD000$$DPCAJ00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL6061 | ALUMINUM ALLOY 6061 |
| CLD000 | CERAMIC |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| LRA000 | LEATHER |
| NLA000 | NICKEL |
| FBB000 | NYLON |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCE000 | PLASTIC ALKYD |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCR000 | PLASTIC POLYCARBONATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| CLB000 | PORCELAIN |
| FBD000 | RAYON |
| RCD000 | RUBBER CHLOROPRENE |
| RCA000 | RUBBER NATURAL |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| TTB000 | TITANIUM |
| WDC000 | WOOD |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
CRHXJLAMP TYPE ACCOMMODATED AND QUANTITY
INDICATES THE TYPE AND NUMBER OF LAMPS THAT THE ITEM CAN ACCOMMODATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CRHXJAK2*;CRHXJAK2$$JAK3*)
| Table 1 |
| Reply Code (AD48) | Reply |
| BF | ARGON |
| BY | CANDELABRA |
| CS | CANDLE |
| AB | CARBON ARC |
| AC | FLASHTUBE |
| AD | FLUORESCENT |
| AF | INCANDESCENT |
| AG | INFRARED |
| CP | KRYPTON |
| CH | LIGHT EMITTING DIODE |
| AH | MERCURY VAPOR |
| AJ | MERCURY-XENON |
| CQ | METALLIC IODIDES |
| AK | NEON |
| CM | SODIUM VAPOR |
| AS | TUNGSTEN HALOGEN |
| AM | ULTRAVIOLET |
| AQ | WICK |
| CF | XENON |
IF STYLE/REPLY CODE(s) ACD, APL, ATG, AWS OR BAK WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (ADAV and ABHP)
IF STYLE/REPLY CODE(s) ADQ OR AXP WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (ABHP and ABMK)
IF STYLE/REPLY CODE(s) AHL WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (ABHP and ASDB)
IF STYLE/REPLY CODE(s) ALC, AND OR BJG WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (ABKW and ABHP and ABMK)
SHPEDSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDACD)
| Table 1 |
| Reply Code (AD07) | Reply |
| ACD | CONICAL |
| ADQ | DIAMOND |
| AHL | HEXAGONAL |
| AJG | IRREGULAR |
| ALC | OVAL |
| AND | RECTANGULAR |
| BAK | RIGHT ANGLE |
| APL | ROUND |
| ATG | STRAIGHT |
| AWS | TAPERED |
| BJG | TEARDROP |
| AXP | TRIANGULAR |
ABFY*JOVERALL DEPTH
AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABFYJAB2.0*;ABFYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAB2.0*;ADAVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJAB2.0*;ASDBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDPNA000*;SFTT3AEEDPNA000$DPNC000*;SFTT3AEEDPNA000$$DPNC000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CPA000 | COMPOUND GLAZE |
| CUB000 | COPPER ALLOY |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| CLD000 | ENAMEL PORCELAIN |
| MSD000 | EPOXY |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| PNA000 | PAINT |
| PNC000 | PAINT ALUMINUM |
| PSA000 | PASSIVATE |
| PCH000 | PLASTIC VINYL |
| CLC000 | PORCELAIN |
| PRA000 | PRIMER |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
AEUJ*DLAMP BASE TYPE ACCOMMODATED
INDICATES THE TYPE OF LAMP BASE THE ITEM WILL ACCOMMODATE.
Enter the applicable reply code from the table below
(AEUJDDQ*;AEUJDEL$DEM*;AEUJDEL$$DEM*)
| Table 1 |
| Reply Code (AD36) | Reply |
| PA | 2G13 |
| AA | ADMEDIUM SCREW |
| AB | ADMEDIUM SCREW SKIRTED |
| NZ | B42T |
| AE | BRASS FERRULE |
| AF | CANDELABRA SCREW |
| PD | CYLINDRICAL |
| AP | DOUBLE CONTACT BAYONET CANDELABRA |
| AQ | DOUBLE CONTACT BAYONET CANDELABRA EXPORT |
| AR | DOUBLE CONTACT BAYONET CANDELABRA INDEXING |
| AT | DOUBLE CONTACT BAYONET PINLESS |
| AU | DOUBLE CONTACT CANDELABRA PREFOCUS |
| AW | DOUBLE CONTACT MEDIUM RING |
| AX | DOUBLE CONTACT MINATURE FLANGED |
| BD | FLEXIBLE WIRE LEADS |
| BE | FOUR PIN CIRCLINE |
| PC | G13 |
| PB | G5 |
| BL | INTERMEDIATE SCREW |
| BM | INTERMEDIATE SCREW EXPORT |
| BN | KNURLED SCREW |
| BS | MEDIUM BIPIN |
| BT | MEDIUM BIPOST |
| BU | MEDIUM PREFOCUS |
| BV | MEDIUM SCREW |
| BW | MEDIUM SCREW EXPORT |
| BX | MEDIUM SCREW SKIRTED |
| BY | MEDIUM SIDE PRONG |
| BZ | METAL SLEEVE WITH FLEXIBLE WIRE LEADS |
| CA | MIDGET FLANGED |
| CC | MIDGET SCREW |
| CD | MINIATURE BAYONET |
| CE | MINIATURE BAYONET PINLESS |
| CG | MINIATURE BIPIN |
| CL | MINIATURE PINLESS |
| CM | MINIATURE SCREW |
| CN | MINIATURE TWO PIN |
| CP | MOGUL BIPIN |
| CQ | MOGUL BIPOST |
| CR | MOGUL END PRONG |
| CS | MOGUL END PRONG WITH CERAMIC BLOCK |
| CT | MOGUL PREFOCUS |
| CU | MOGUL SCREW |
| CV | MOGUL SCREW EXPORT |
| CZ | OVAL SMALL FOUR PIN |
| DB | RECESSED DOUBLE CONTACT |
| DC | RECESSED SINGLE CONTACT |
| DE | SINGLE CONTACT BAYONET CANDELABRA |
| DF | SINGLE CONTACT BAYONET CANDELABRA EXPORT |
| DG | SINGLE CONTACT BAYONET CANDELABRA INDEXING |
| FH | SINGLE CONTACT BAYONET PINLESS |
| DJ | SINGLE CONTACT CANDELABRA PINLESS |
| DK | SINGLE CONTACT CANDELABRA PREFOCUS |
| DM | SINGLE CONTACT MINIATURE FLANGED |
| FF | SINGLE PIN |
| DQ | SPADE SINGLE CONTACT TERMINAL |
| DU | SPECIAL NO.10-64 THREAD |
| EF | TELEPHONE SLIDE NO.TWO |
| EG | TELEPHONE SLIDE SPECIAL |
| EH | THREE CONTACT LUGS |
| EJ | THREE CONTACT MEDIUM BAYONET |
| EK | THREE CONTACT MEDIUM SCREW |
| EL | THREE CONTACT MOGUL SCREW |
| EM | THREE PRONG-TWO PRONG |
| EN | THREE SCREW TERMINALS |
| EQ | THREE WIRE LEADS |
| ER | TWO CONTACT LUGS |
| ES | TWO SCREW TERMINALS |
| EW | WEDGE |
| EX | WIRE TERMINALS, DOWN |
CRLP*JLENS TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF LENSES INCLUDED IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CRLPJBZ2.0*;CRLPJBZ2.0$JBZ2.1*)
| Table 1 |
| Reply Code (AP19) | Reply |
| AB | CONICAL |
| AH | CONVEX, SEMI-DOME |
| AM | CONVEX, STRAIGHT SIDE, SEMI-DOME |
| AN | CONVEXO CONCAVE |
| AP | CYLINDRICAL |
| AS | CYLINDRICAL, FLUTED, LONG |
| AT | CYLINDRICAL, FLUTED, SHORT |
| AY | DOME, FOUR EARS |
| AZ | DOME, HALF, FLANGED |
| BB | DOME, KNURLED, INTERNAL THREAD |
| BC | DOME, NOTCHED |
| BD | DOME, PLAIN |
| BE | DOME, SMALL |
| BF | DOME, TAPERED |
| BG | FLAT, ANGULAR |
| BH | FLAT, BUBBLE, CENTER-IN-LINE HOLES |
| BJ | FLAT, CENTER-IN-LINE HOLES |
| BN | FLAT, KNURLED |
| BR | FLAT, NARROW |
| BS | FLAT, NOTCHED |
| BT | FLAT, OFF CENTER-IN-LINE HOLES |
| BX | FLAT, RECTANGULAR |
| CA | FLAT, RECTANGULAR W/HOLES |
| BY | FLAT, RECTANGULAR, FRAMED |
| BZ | FLAT, RECTANGULAR, V GROOVES ON INSIDE FOUR WALLS |
| CB | FLAT, ROUND |
| CE | FLAT, SQUARE |
| CF | FLAT, SQUARED OVAL |
| CJ | PLANO CONVEX |
| CK | RECTANGULAR |
| CM | ROUND, SHOULDERED |
| CP | STOVEPIPE, ELONGATED, EXTERNAL THREAD |
| CQ | STOVEPIPE, EXTERNAL THREAD |
| CR | STOVEPIPE, FLANGED |
| CX | STOVEPIPE, PLAIN |
| CZ | TEARDROP, CENTER HOLE |
| DA | TEARDROP, FLANGED |
| DB | TEARDROP, PLAIN |
| DC | TEARDROP, TWO HOLES |
| DE | TUBULAR |
AEXD*DLENS COLOR
THE HUE OR TINT OF THE LENS.
Enter the applicable reply code from the table below
(AEXDDGR0069*;AEXDDGR0153$DNE0000*;AEXDDGR0153$$DNE0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BL0004 | BLACK, OPAQUE |
| BU0000 | BLUE |
| BU0055 | BLUE GREEN |
| BU0001 | BLUE, AVIATION, MIL-C-25050 TYPE 1 |
| BU0002 | BLUE, DAYLIGHT |
| CL0001 | COLORLESS |
| CR0000 | CREAM |
| MS0001 | DAYLIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0069 | GREEN, AVIATION |
| GR0001 | GREEN, AVIATION, MIL-C-25050 TYPE 1 |
| GR0153 | GREEN-YELLOW, TENNESSEE EASTMAN COMPANY, 14686 |
| NR0000 | INFRARED |
| NE0000 | NEUTRAL |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0002 | RED, AVIATION, MIL-C-25050 TYPE 1 |
| RE0003 | RED, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| RE0004 | RED, INSTRUMENT AND PANEL LIGHTING, MIL-C-25050, TYPE 1 |
| WH0000 | WHITE |
| WH0061 | WHITE, AVIATION |
| WH0002 | WHITE, AVIATION, MIL-C-25050 TYPE 1 |
| WH0003 | WHITE, CHALK |
| WH0004 | WHITE, LUNAR |
| WH0001 | WHITE, LUNAR IDENTIFICATION, MIL-C-25050 TYPE 2 |
| WH0062 | WHITE, ROHM AND HAAS, 122125 |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0094 | YELLOW, AVIATION |
| YE0002 | YELLOW, AVIATION, MIL-C-25050 TYPE 1 |
AETM*DFILTER COLOR
THE HUE OR TINT OF THE FILTER.
Enter the applicable reply code from the table below
(AETMDRE0003*;AETMDYE0000$DWH0004*;AETMDYE0000$$DWH0004*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BL0004 | BLACK, OPAQUE |
| BU0000 | BLUE |
| BU0055 | BLUE GREEN |
| BU0001 | BLUE, AVIATION, MIL-C-25050 TYPE 1 |
| BU0002 | BLUE, DAYLIGHT |
| CL0001 | COLORLESS |
| CR0000 | CREAM |
| MS0001 | DAYLIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0069 | GREEN, AVIATION |
| GR0001 | GREEN, AVIATION, MIL-C-25050 TYPE 1 |
| GR0153 | GREEN-YELLOW, TENNESSEE EASTMAN COMPANY, 14686 |
| NR0000 | INFRARED |
| NE0000 | NEUTRAL |
| RG0000 | ORANGE |
| PK0000 | PINK |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0002 | RED, AVIATION, MIL-C-25050 TYPE 1 |
| RE0003 | RED, IDENTIFICATION, MIL-C-25050 TYPE 2 |
| RE0004 | RED, INSTRUMENT AND PANEL LIGHTING, MIL-C-25050, TYPE 1 |
| WH0000 | WHITE |
| WH0061 | WHITE, AVIATION |
| WH0002 | WHITE, AVIATION, MIL-C-25050 TYPE 1 |
| WH0003 | WHITE, CHALK |
| WH0004 | WHITE, LUNAR |
| WH0001 | WHITE, LUNAR IDENTIFICATION, MIL-C-25050 TYPE 2 |
| WH0062 | WHITE, ROHM AND HAAS, 122125 |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0094 | YELLOW, AVIATION |
| YE0002 | YELLOW, AVIATION, MIL-C-25050 TYPE 1 |
AEXK*DLENS TRANSPARENCY
THE ABILITY OF THE LENS TO TRANSMIT LIGHT AND ALLOW VISUAL PERCEPTION.
Enter the applicable reply code from the table below
(AEXKDAE)
| Table 1 |
| Reply Code (AF93) | Reply |
| AE | OPAQUE |
| AH | TRANSLUCENT |
| AJ | TRANSPARENT |
AQYQ*ANUMERIC DESIGNATOR
THE NUMBER ASSIGNED TO DESIGNATE THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AQYQAT7)
AXGY*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAGK)
| Table 1 |
| Reply Code (AM39) | Reply |
| AEA | ANGLE BRACKET |
| BWL | BALL AND SOCKET |
| BFA | BALL SOCKET |
| ABB | BASE |
| AAC | BOLT |
| BHE | BOLT HOLE |
| BFQ | BOLTED TO CEILING |
| ABC | BRACKET |
| BJY | BULKHEAD |
| ADP | BUTTON |
| ABF | CASE |
| BPR | CEILING |
| BPJ | CEILING CANOPY |
| AEH | CEILING SUSPENSION |
| ABH | CLAMP |
| AFL | CLIP |
| AEM | COMPRESSION |
| AFP | CONE |
| AFR | CORD |
| BRT | COUPLING SOCKET |
| BRR | CROSSARM |
| BRS | CROSSARM BRACKET |
| BJZ | DECK |
| BRW | EYEBOLT |
| ACR | FLANGE |
| AGQ | FLUSH |
| BEP | FREE STANDING BASE |
| ABL | FRICTION |
| AFZ | GLAND NUT |
| AGB | HEADBAND |
| AGG | HOOK |
| AGJ | INTEGRAL THREADED NUT |
| BKF | ISOLATOR VIBRATION |
| AGK | LASHING EYE |
| AGL | LEG |
| ABN | LUG |
| AHN | MAGNETIC |
| BRX | MAST |
| BKX | OVERHEAD |
| ASL | PEDESTAL |
| AMS | PENDANT |
| AHP | PIPE |
| AEE | PLATE |
| BEA | PORTABLE |
| BLE | POST |
| BRY | QUICK DISCONNECT COUPLING |
| BKT | RECESSED |
| AHT | RING |
| AHW | SAFETY PIN |
| ABW | SCREW |
| AHX | SECTIONAL STANDARD |
| ALF | SELF-LOCKING NUT |
| ALG | SHELF |
| BYD | SKIRT |
| AKC | SLEEVE |
| ABZ | SPACER |
| AER | SPRING |
| BYE | SPRING WASHER |
| AJL | STAKE |
| AJM | STAND |
| ACB | STRAP |
| AAE | STUD |
| AJS | SUPPORT ROD |
| AJT | SUSPENSION |
| BBL | SWIVEL BRACKET |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE |
| BPH | THREADED HUB |
| AET | THREADED STUD |
| AKF | TRIPOD |
| AKG | TRUNNION |
| ACQ | UNTHREADED HOLE |
| AKJ | VERTICAL ROD |
| ATS | WALL |
| BPF | WASHER |
| BYF | WEDGE |
| AKK | WELDED |
AEXV*JMOUNTING BASE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE MOUNTING BASE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEXVJAB2.0*;AEXVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEXW*JMOUNTING BASE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING BASE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEXWJAC2.0*;AEXWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEXX*JMOUNTING BASE HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE MOUNTING BASE,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEXXJAB2.0*;AEXXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEXY*JMOUNTING BASE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE MOUNTING BASE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEXYJAB2.0*;AEXYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
TTQY*JTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJACZ2*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AAA | ANY ACCEPTABLE |
| ADZ | BAR |
| AEQ | BAYONET PLUG, DOUBLE CONTACT |
| AER | BAYONET PLUG, SINGLE CONTACT |
| AEP | CABLE W/CONNECTOR |
| ADB | CLIP |
| AES | CLIP, COMPRESSION |
| AET | CLIP, COMPRESSION, FLAT SPRING |
| ALC | CONNECTOR WITH LEADS |
| ACN | CONNECTOR, PLUG |
| AFC | CONNECTOR, PLUG, EXTERNAL, 3 CONTACTS, 1 CONTACT U-SHAPED FOR GROUND |
| AEW | CONNECTOR, PLUG, EXTERNAL, CURVED BLADE, 2 WIRE |
| AEX | CONNECTOR, PLUG, EXTERNAL, CURVED BLADE, 3 WIRE |
| AEY | CONNECTOR, PLUG, EXTERNAL, FLAT BLADE, 3 WIRE |
| AEZ | CONNECTOR, PLUG, EXTERNAL, RIGHT ANGLE T-BLADE |
| AFA | CONNECTOR, PLUG, EXTERNAL, STANDARD PARALLEL, 2 BLADE |
| AFB | CONNECTOR, PLUG, EXTERNAL, STANDARD TANDEM BLADE |
| AFD | CONNECTOR, PLUG, INTERNAL, TWISTLOCK, 2 CONTACTS |
| AFE | CONNECTOR, PLUG, INTERNAL, TWISTLOCK, 3 CONTACTS |
| AAF | CONNECTOR, RECEPTACLE |
| AMC | GROUND WIRE |
| AMD | GROUNDING STRIP |
| AGF | LINE CORD |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| ABQ | SCREW |
| ACY | SOCKET |
| AFF | SOLDER LUG |
| AAS | SOLDER STUD |
| ABB | TAB, SOLDER LUG |
| AFG | TEST PROD |
| ACC | WIRE LEAD |
CZGS*DTRADE DESIGNATOR OF THE MALE OR FEMALE CONNECTOR
THE DESIGNATION BY WHICH THE MALE OR FEMALE CONNECTOR IS IDENTIFIED THROUGHOUT INDUSTRY.
Enter the applicable reply code from the table below
(CZGSDFVR)
| Table 1 |
| Reply Code (AK54) | Reply |
| FJZ | FORM |
| FVR | MODEL |
| FVS | STYLE |
| BAG | TYPE |
AEYB*DWIRING PROVISION METHOD
THE MEANS PROVIDED FOR ELECTRICAL CONNECTION OF THE ITEM TO A POWER SOURCE.
Enter the applicable reply code from the table below
(AEYBDD)
| Table 1 |
| Reply Code (AD53) | Reply |
| C | CABLE |
| D | CABLE ASSEMBLY |
| B | INDIVIDUAL WIRE |
ABFE*DHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDCN*;ABFEDES$DAN*;ABFEDES$$DAN*)
| Table 1 |
| Reply Code (AB27) | Reply |
| AA | ACID RESISTANT |
| DJ | CORROSION RESISTANT |
| FS | DRIPTIGHT |
| AC | DRIPTIGHT-NEMA TYPE 2 |
| CF | DUSTPROOF |
| AD | DUSTPROOF-NEMA TYPE 13 |
| DY | DUSTTIGHT |
| AE | DUSTTIGHT-NEMA TYPE 5 |
| FC | ELECTROMAGNETIC RADIATION SUPPRESSIVE |
| CE | EXPLOSION PROOF |
| GH | EXPLOSION PROOF NEC CL. II, GP. EFG |
| AF | EXPLOSION PROOF NEC CL.I, GP.ABCD;CL.II, GP.EFG;CL.III |
| AJ | EXPLOSION PROOF NEC CL.I, GP.CD;CL.II, GP.EFG;CL.III |
| AK | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG;CL.III |
| AN | EXPLOSION PROOF NEC CL.II, GP.EFG;CL.III |
| GP | EXPLOSION PROOF, TEMPERATURE CLASS T1 DIN 57165 |
| GQ | EXPLOSION PROOF, TEMPERATURE CLASS T2 DIN 57165 |
| GR | EXPLOSION PROOF, TEMPERATURE CLASS T3 DIN 57165 |
| GS | EXPLOSION PROOF, TEMPERATURE CLASS T4 DIN 57165 |
| GT | EXPLOSION PROOF, TEMPERATURE CLASS T5 DIN 57165 |
| GU | EXPLOSION PROOF, TEMPERATURE CLASS T6 DIN 57165 |
| FE | FIREPROOF |
| DN | FLAME RESISTANT |
| GF | FLAMEPROOF |
| DP | FUEL RESISTANT |
| AT | GASTIGHT |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| DR | HEAT RESISTANT |
| DV | MOISTURE PROOF |
| BR | MOISTURE RESISTANT |
| CJ | OILTIGHT |
| AQ | OILTIGHT-NEMA TYPE 11 |
| EL | PRESSURE PROOF |
| BL | RADIO FREQUENCY INTERFERENCE |
| EM | RAINTIGHT |
| AR | RAINTIGHT-NEMA TYPE 3R |
| GC | SALT SPRAY PROOF |
| DT | SALT WATER RESISTANT |
| EP | SHOCK RESISTANT |
| BT | SPLASHPROOF |
| CL | SPRAYTIGHT |
| DZ | SUBMERSIBLE |
| AS | SUBMERSIBLE-NEMA TYPE 6 |
| ES | VAPORTIGHT |
| FM | VIBRATION PROOF |
| GB | VIBRATION RESISTANT |
| CM | WATERPROOF |
| CN | WATERTIGHT |
| AU | WATERTIGHT-NEMA TYPE 4 |
| DX | WEATHERPROOF |
| AV | WEATHERPROOF-NEMA TYPE 3 |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJALZ2*;TMQYJALZ2$$JALZ3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| AHM | BATTERY |
| AGC | CARRYING CASE |
| AHR | CLEANING KIT |
| AHN | CLIP-ON MIRROR |
| ARR | DETACHABLE MOUNTING BRACKET |
| AHP | DIFFUSING COVER GLASS |
| AYT | DRIVE MOTOR |
| ARS | EYEPIECE |
| ARW | FLEXIBLE CORD W/PLUG |
| ARX | FUSE |
| AQF | HANDLE |
| ARY | HEAT ABSORBING GLOBE |
| AHQ | INSTRUCTION BOOKLET |
| ASA | LAMP |
| BKW | LAMPHOLDER |
| ASB | LOCALIZER |
| ASC | LOCKING DEVICE |
| BAE | MOUNTING KIT |
| ASD | PARFOCAL OBJECTIVE |
| ALZ | POWER CABLE |
| ASE | POWER TRANSFORMER |
| ASF | REFLECTING SHADE |
| ASG | REMOTE KEY |
| ASH | RETRACTING MOTOR |
| AHS | RIGHT ANGLE MIRROR |
| ASJ | SIGNALING TUBE |
| AHT | SIGNALING WAND |
| BKX | SPARE BATTERY |
| BAR | SPARE PARTS KIT |
| ARZ | STERILIZABLE HANDLE |
| ABK | STORAGE BOX |
| AHX | TECHNICAL MANUAL |
| ASK | TELESCOPING STANDARD |
| BRG | TEST CERTIFICATE ISSUED BY THE GERMAN FEDERAL STANDARDS LABORATORY |
| AHL | TIMING LIGHT ADAPTER JACK |
| ART | ULTRAVIOLET FILTER |
| AHW | ULTRAVIOLET PROTECTION SPECTACLES |
| ASL | VARIABLE VOLTAGE CONTROL |
| ASM | WEATHERPROOF CASE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAJQ*;CBBLDAJA$$DAJP*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AHT | ADJUSTABLE LIGHT BEAM SPREAD |
| AHW | ADJUSTABLE MICROSCOPE NOSEPIECE |
| AHX | ADJUSTABLE SLIT |
| ACY | AMMETER |
| AHY | AUTOMATIC LAMP CHANGER |
| AHZ | AUTOMATIC SWITCHING RELAY |
| AJA | AUTOMATIC VOLTAGE SELECTOR |
| AJB | BLACKOUT DEGREE, COMPLETE |
| AJC | BLACKOUT DEGREE, PARTIAL |
| CYH | BOTTOM FIXATION |
| AJD | CURRENT REGULATOR CIRCUIT |
| BER | DETACHABLE |
| AJE | DIMMING DEVICE |
| AJF | EMERGENCY POWER SUPPLY |
| AFR | FERRULE |
| CRH | FLOODLIGHT |
| BES | HEAT DISSIPATING |
| AMW | HORIZONTAL SURFACE |
| CVD | HOUSING |
| BGR | INDICATOR LIGHT |
| AJG | INTEGRAL TIMING ADVANCE INDICATOR AND TACHOMETER |
| CYJ | INTERFERENCE SUPPRESSION |
| CYK | LEFT FIXATION |
| CJD | LICENSE PLATE ILLUMINATION |
| AJH | LIGHT ADJUSTMENT LOCKING DEVICE |
| AJJ | MANUAL VOLTAGE SELECTOR |
| ARA | MOUNTING BRACKET |
| AJK | NONTURN FEATURE |
| CYL | OVERHEAD FIXATION |
| ALK | PANEL BACK MOUNTING |
| ALH | PANEL FRONT MOUNTING |
| CFY | PORTABLE |
| AEG | PRESS TO TEST |
| AJL | PUSH BUTTON TRIGGER |
| AJM | RECHARGEABLE BATTERY |
| AJN | REFLECTIVE LENS |
| AJP | REMOVABLE LIGHT FILTER |
| AJQ | REMOVABLE TOP W/SHIELD |
| AJR | REPLACEABLE BATTERY |
| AJS | RETRACTABLE LIGHT |
| AJT | RETRACTABLE REEL |
| BWW | REVERSIBLE |
| AJW | REVOLVING DISC COLOR STANDARD HOLDER |
| CYM | RIGHT FIXATION |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| CNU | SHOCK ABSORBER |
| ACJ | SPOTLIGHT |
| AAQ | SWITCH |
| ABM | TERMINAL COVERS |
| CRJ | TEST SWITCH |
| CYN | TIME CLOCK |
| AJX | TRANSFORMER |
| ALJ | VERTICAL SURFACE |
| ADH | VOLTMETER |
| CVE | WATERTIGHT SEAL |
| AJY | X-RAY ILLUMINATOR |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDHL)
| Table 1 |
| Reply Code (EN02) | Reply |
| HL | ENERGY EFFICIENT - FEMP - LIGHTING - COMPACT FLUORESCENT LAMPS |
| KA | ENERGY EFFICIENT - LIGHTING - TRAFFIC SIGNALS |
| GE | FLUORESCENT LAMPS - FEMP-LIGHTING - ENERGY EFFICIENT PRODUCTS |
| XX | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
| KD | TRAFFIC SIGNALS - ENERGY STAR SUSPENDED - ENERGY EFFICIENT PRODUCTS |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AFJT*DLIGHT FUNCTION
THE FUNCTION OF A LIGHT DESIGNED TO INDICATE THE POSITION,MOTION,HAZARDS,AND THE LIKE,OR TO DRAW ATTENTION.
Enter the applicable reply code from the table below
(AFJTDAJ*;AFJTDBG$$DBM*)
| Table 1 |
| Reply Code (AD72) | Reply |
| AB | ANCHOR |
| AC | ANTICOLLISION |
| BA | BACK UP |
| AD | BLACKOUT TAIL AND STOP COMBINATION |
| AE | BOOM |
| AZ | BOW |
| BE | BOW AND STERN |
| AF | BREAKDOWN |
| BH | COMBINATION, TAIL-STOP, DIRECTION-LICENSE PLATE |
| BJ | COMBINATION, TAIL-STOP-DIRECTION |
| BF | COMBINATION, TAIL-STOP-DIRECTION-BACKUP |
| BG | COMBINATION, TAIL-STOP-DIRECTION-BACKUP-LICENSE PLATE |
| BB | DIRECTIONAL SIGNAL |
| AG | FORMATION |
| BK | FORMATION-TOWING |
| AH | FUSELAGE |
| AJ | GENERAL SERVICE TAIL AND LICENSE PLATE ILLUMINATION COMBINATION |
| AL | GENERAL SERVICE TAIL AND STOP AND BLACKOUT STOP COMBINATION |
| AN | GENERAL SERVICE TAIL AND STOP AND BLACKOUT TAIL COMBINATION |
| AM | GENERAL SERVICE TAIL AND STOP AND LICENSE PLATE ILLUMINATION COMBINATION |
| AK | GENERAL SERVICE TAIL AND STOP COMBINATION |
| BL | LICENSE PLATE |
| AP | MASTHEAD |
| AQ | PASSING |
| AR | POSITION |
| AS | RANGE |
| AT | SIDE |
| BM | SIGNAL |
| AU | STERN |
| AV | TAIL |
| AW | TOWING |
| AX | WING TIP CLEARANCE |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDB)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRTA000*;PRMTDPTA000$DAZA000*;PRMTDPTA000$$DAZA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPTA000R2.0*;PMWTJPTA000R2.0$$JPTA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPDA0002.0*;PMLCJPDA0002.0$JPDA0002.0*;PMLCJPDA0002.0$$JPDA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ011$$DHAZ008*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ052 | ZINC |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information