An item consisting of a blade supported by a block or a single or double frame.May have a tapered hole or handle socket for insertion of a handle.It may or may not be furnished with a handle.It may also be furnished with a handle brace and channels.Excludes:BLADE, SQUEEGEE.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED04460*)
ALBYDUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAND*;ALBYDANC$DAHN*)
| Table 1 |
| Reply Code (AH21) | Reply |
| ANB | FLOOR |
| ANC | HAND |
| AND | PHOTOGRAPHIC FILM |
| ANE | SILK SCREEN PROCESS |
| ANF | STREET |
| AHN | WINDOW |
AJLBABLADE QUANTITY
THE NUMBER OF INDIVIDUAL BLADES INCLUDED.
Enter the numeric reply with a minimum of one digit.
(AJLBA10*)
CYEMDBLADE MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE BLADE IS FABRICATED.
Enter the applicable reply code from the table below
(CYEMDPCA000*;CYEMDWDC000$DCUB000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| CDA000 | CADMIUM |
| CSA000 | CELLULOSE |
| CUB000 | COPPER ALLOY |
| CU0148 | COPPER ALLOY 745 |
| FBA000 | FIBER |
| FEA000 | IRON |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| RCE000 | RUBBER |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
AEAEJBLADE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BLADE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEAEJAA2.0*;AEAEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BLKB*DINSULATOR TYPE ACCOMMODATED
INDICATES THE TYPE OF INSULATOR THE ITEM IS DESIGNED TO ACCOMMODATE.
Enter the applicable reply code from the table below
(BLKBDAEJ*;BLKBDAEG$DAEH*;BLKBDAEG$$DAEH*)
| Table 1 |
| Reply Code (AK54) | Reply |
| AEH | CORD EDGE |
| AEJ | FLAT |
| AEG | GROUND |
AXGY*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDBFR*;AXGYDACM$DABY*)
| Table 1 |
| Reply Code (AM39) | Reply |
| AXP | 135 DEG BACK ANGLE |
| AXQ | 135 DEG LEFT SIDE ANGLE |
| AXR | 135 DEG RECLINE ANGLE |
| AXS | 135 DEG RIGHT SIDE ANGLE |
| AXT | 180 DEG BOTTOM CENTER |
| BQQ | 180 DEG BOTTOM UNION |
| BQP | 180 DEG STRAIGHT BOTTOM |
| BQN | 180 DEG TOP CENTER |
| BQR | 225 DEG BACK ANGLE |
| AWZ | 45 DEG BACK ANGLE |
| BQS | 45 DEG BOTTOM |
| BQT | 45 DEG INCLINED ANGLE |
| AXA | 45 DEG LEFT OBLIQUE |
| BQW | 45 DEG LEFT SIDE ANGLE |
| AXB | 45 DEG RECLINED ANGLE |
| AXC | 45 DEG REGULAR OBLIQUE FORM |
| BQX | 45 DEG RIGHT SIDE ANGLE |
| AXD | 45 DEG RIGHT SIDE OBLIQUE |
| BZS | 6 BOLT, REGULAR DUTY |
| APR | 7 PIN MINIATURE SOCKET |
| BZT | 8 BOLT, HEAVY DUTY |
| APS | 8 PIN OCTAL BASE |
| AXE | 90 DEG BACK ANGLE |
| AXF | 90 DEG FRONT ANGLE |
| AXG | 90 DEG LEFT ANGLE |
| AXH | 90 DEG LEFT HAND |
| AXJ | 90 DEG LEFT SIDE ANGLE |
| AXK | 90 DEG REGULAR ANGLE |
| AXL | 90 DEG RIGHT ANGLE |
| AXM | 90 DEG RIGHT HAND |
| AXN | 90 DEG RIGHT SIDE ANGLE |
| AYF | ADAPTER |
| AZR | ADAPTER FASTENED TO EITHER SIDE OF HEADBAND |
| AZS | ADAPTER FASTENED TO LEFT EARPHONE |
| AZT | ADAPTER FASTENED TO LEFT SIDE OF HEADBAND |
| AZW | ADAPTER FASTENED TO LEFT SIDE OF HELMET |
| AZX | ADAPTER FASTENED TO RIGHT SIDE OF HEADBAND |
| AZY | ADAPTER IN CENTER OF HEADBAND |
| BMT | ADAPTER PLATE |
| BDH | ADHESIVE |
| AEV | ADHESIVE AND DOUBLE FACED TAPE |
| AUG | ADHESIVE COATED BACK |
| AYA | ADHESIVE STRIP |
| BLQ | ADHESIVE TAPE |
| BWD | ADJUSTABLE |
| AWG | ADJUSTABLE ANGLE |
| AYZ | ADJUSTABLE ANGLE BRACKET |
| BWE | ADJUSTABLE BACK |
| BWY | ADJUSTABLE BASE |
| AEK | ADJUSTABLE BRACKET |
| AEL | ADJUSTABLE CLAMP |
| BQZ | ADJUSTABLE EAR |
| AUZ | ADJUSTABLE FEET |
| AZZ | ADJUSTABLE STEEL ARM |
| AAU | AIR/OIL SHOCK STRUT |
| BNF | ANCHOR NUTS |
| ACZ | ANCHOR PLATE FLANGE |
| AEA | ANGLE BRACKET |
| AWH | ANGLE FORM REGULAR |
| BBA | ARM |
| APW | ARMATURE SHAFT |
| ARH | ASA SPINDLE NOSE |
| BLC | AXIAL STUD |
| BFT | AXIALLY LOCATED SCREW |
| AJU | BACK |
| AWJ | BACK ANGLE |
| AQP | BACKPLATE |
| BXU | BAIL |
| BTZ | BAIL HANDLE |
| AFB | BALL |
| ALZ | BALL AND DETENT |
| BWL | BALL AND SOCKET |
| BEM | BALL PIVOT |
| BFA | BALL SOCKET |
| BNA | BALL STUD |
| BMN | BAR |
| AFC | BARREL |
| AFD | BARRIER |
| ATX | BARS |
| ABB | BASE |
| BCN | BASE DRILLED |
| BCP | BASE DRILLED AND/OR TAPPED |
| BHW | BASE OUTLET |
| BRJ | BASE PLATE |
| BYG | BASE PLATE WITH DRILLED HOLE |
| BYH | BASE PLATE WITH THREADED HOLE |
| BBS | BASE UNTHREADED HOLES |
| AUK | BATTERY BOX |
| ADG | BAYONET |
| AFE | BAYONET LOCK |
| ADH | BEAD |
| BKD | BEAM VIBRATION |
| BNB | BEARING |
| ADM | BEARING PLAIN ROD END |
| BWZ | BED PLATE |
| APY | BENCH |
| CAA | BENCH TOP |
| AFF | BEZEL RING |
| AKZ | BINNACLE |
| ACT | BLIND FASTENER |
| AXY | BLOCK |
| AQQ | BOARD |
| AQS | BODY |
| ADB | BODY THROUGH HOLE |
| AAC | BOLT |
| ADD | BOLT CIRCLE |
| ALA | BOLT CLAMP |
| BFB | BOLT FLANGE |
| BHE | BOLT HOLE |
| ANP | BOLT THROUGH BASE |
| BZP | BOLT W/NUT |
| BFW | BOLTED THROUGH BORE |
| BSN | BOLTED THROUGH CENTER HOLE |
| BFQ | BOLTED TO CEILING |
| AYN | BOLT-NUT |
| CAK | BONDED |
| BBB | BOOM ADAPTER ON LEFT SIDE OF HEADBAND |
| BBC | BOOM ATTACHED TO HEADBAND |
| BXR | BORE |
| ADN | BOSS |
| AWK | BOTTOM |
| BCE | BOTTOM CAST ON ANCHORS |
| BQM | BOTTOM CENTER |
| AWL | BOTTOM SWIVEL |
| AXZ | BRACE |
| ABC | BRACKET |
| BBD | BRACKET FASTENED TO HEADBAND |
| BBE | BRACKET FASTENED TO RIGHT SIDE OF HEADBAND |
| AVZ | BRACKET W/ 2 SCREWS |
| APA | BRACKET W/2 HEX NUTS |
| APT | BRACKET W/2 MOUNTING NUTS |
| ANN | BRACKET W/2 STUDS |
| AQH | BRACKET W/2 WING NUTS |
| AQJ | BRACKET W/3 NUTS |
| BYJ | BRACKET WITH DRILLED HOLE |
| AQC | BRACKET WITH HOLE |
| AQD | BRACKET WITH THREADED HOLE |
| BYK | BRACKET WITHOUT HOLE |
| AFG | BRAZED |
| BJE | BUCKLE |
| BJY | BULKHEAD |
| BWM | BUMPER CHAIN |
| ARV | BUNGEE CORD |
| ANQ | BUS BAR |
| ABD | BUSHING |
| BKH | BUSHING, PRESS-FIT |
| BMQ | BUSHING, SLEEVE |
| ADP | BUTTON |
| BHM | BUTTON, SNAP FASTENER |
| AVD | BY HOLES IN FLANGE |
| AVC | BY SHEAVE |
| ANR | CABINET |
| ATY | CABINET W/COMPLETE HARDWARE FOR RACK |
| AQT | CABLE |
| AQW | CABLE ATTACHED TO SHACKLES |
| AEN | CAM FASTENER |
| AYG | CAM LOCKING COLLAR |
| ABE | CAN |
| ALX | CAPTIVE BOLT |
| AEP | CAPTIVE FASTENERS |
| BRZ | CAPTIVE NUT |
| AMA | CAPTIVE SCREWS |
| BPP | CAPTIVE STUD |
| ARK | CARRYING CASE |
| ABF | CASE |
| ANS | CASE MOUNTED PORTABLE |
| AFH | CASTER |
| BER | C-CLAMP |
| BPR | CEILING |
| BPJ | CEILING CANOPY |
| AEH | CEILING SUSPENSION |
| AFJ | CELL |
| ABG | CEMENT |
| AZH | CEMENT MORTAR |
| AWM | CENTER BACK |
| ARL | CENTER BACK 1/4 NPT FIXED CONNECTION |
| ADQ | CENTER HOLE |
| AUA | CENTER SECTION |
| BNG | CHANNEL |
| AFK | CHASE NIPPLE |
| AEB | CHASSIS |
| BYU | CHEMICAL BONDING |
| BEE | CHEST |
| BBF | CHEST PLATE |
| AXV | CIRCUIT BOARD |
| ABH | CLAMP |
| BRK | CLAMP ASSEMBLY |
| AQA | CLAMP COLLAR |
| ACX | CLAMP RING |
| AKL | CLAMP TYPE BASE |
| ALB | CLAMP W/SUCTION CUPS |
| BFR | CLAMPED TO MAIN RISER |
| BWR | CLAMPED-SERVED |
| BDJ | CLASP |
| ADR | CLEVIS |
| ADS | CLEVIS LUG |
| BSM | CLINCH EAR |
| AEC | CLINCH NUT |
| BTS | CLINCH PRONG |
| AFL | CLIP |
| BSP | CLIP TAB |
| AMB | CLIP-ON |
| BPB | CLIP-ON FITTING FOR SECURING TO CHANNEL |
| BWS | CLIPPED-SERVED |
| BWT | CLOSED SOCKET |
| ANT | COAXIAL CONNECTOR |
| BYV | COIL SPRING |
| ABU | COIL-SPRING SHOCK UNIT |
| AFM | COLLAR |
| AMC | COLLAR TYPE CLAMP |
| BKG | COLLET |
| BGM | COLLET CHUCK |
| AEM | COMPRESSION |
| BTC | COMPRESSION MOUNTED |
| AJV | COMPRESSION PLATE |
| AZP | CONCEALED SCREW |
| AFN | CONDUIT |
| AFP | CONE |
| ARN | CONNECTION |
| AFQ | CONNECTOR |
| AMD | CONNECTOR PIN |
| BMW | CONSOLE |
| BLR | CONTOURED CORNERS |
| BLS | CONTOURED ENVELOPE ENDS |
| AWN | CONVEX SHAPE |
| AFR | CORD |
| AME | CORD GRIP |
| ABJ | CORE |
| BFX | COTTER PIN |
| BJS | COUNTERBORED HOLE |
| AKQ | COUNTERSUNK HOLE |
| BTX | COUPLING NUT |
| AMF | COUPLING RING |
| BRT | COUPLING SOCKET |
| ATZ | CRADLE IN CABINET |
| BSS | CRANK COUPLING |
| AUL | CRAWLER |
| AMG | CRIMP |
| BCQ | CROSS ARM STRAP W/ENDS THREADED |
| BRR | CROSSARM |
| BRS | CROSSARM BRACKET |
| BNH | CROSS-SHAPED HOLES |
| AFS | CUP |
| BKE | CUP VIBRATION |
| BQH | CURVED OPEN END SLOT |
| CAS | CYLINDER |
| BQY | D RING |
| BZM | DART |
| BJZ | DECK |
| AWP | DIAL 360 DEGREE ROTATION AND STEM 180 DEGREE ROTATION TO SUIT ANY LOCATION |
| AKR | DIMPLED HOLE |
| AYH | DIRECT |
| BMM | DIRECT LINE |
| ABK | DISK |
| BDS | DIVIDED |
| BJT | DOOR/FRAME MORTISE |
| BZU | DOUBLE CARDAN CONSTANT VELOCITY |
| AYP | DOUBLE PUSH BUTTON |
| AYQ | DOUBLE SLIDE HOOK |
| ANW | DOUBLE THROUGH HOLE MOUNTING |
| AMH | DOVETAIL |
| ALY | DRAWER |
| AUH | DRAWSTRING |
| BGN | DRILL CHUCK |
| BFY | DRILLED HOLE |
| BHX | DRILLED PADS |
| BCR | DRIVE POINT |
| CAW | DRUM MOUNTED |
| BJJ | DUAL TIRE |
| CAT | DUCT |
| BHH | DYED |
| AVJ | DZUS RAIL WITH FASTENERS |
| BPC | EAR |
| BXK | ECCENTRIC CAM LOCKING COLLAR |
| BNC | ECCENTRIC LOCKING COLLAR |
| AMJ | ELASTIC |
| BLT | ELASTIC BAND ENVELOPING ALL FOUR SIDES |
| BGR | ELASTIC DRAWCORD |
| BNJ | ELASTIC STOP NUT |
| BLW | ELASTIC WAISTBAND |
| BGS | ELASTIC WEBBING |
| BRP | ELECTRICAL PLUG CONNECTOR |
| CAH | ELECTRICALLY CONDUCTIVE |
| BPG | ELONGATED HOLE |
| BXA | END BELL |
| BCD | END BOLT HOLES |
| BPS | END SOCKET |
| ADU | EPOXY ADHESIVE |
| ANX | EPOXY SHOCK |
| AVL | EQUI SPACED HOLES |
| BYW | ESCUTCHEON PLATE |
| AWQ | EVERY ANGLE BACK |
| BSA | EXPANSION CLAMP |
| BSB | EXPANSION PLUG |
| BHQ | EXPANSION RING |
| AZQ | EXPOSED SCREW |
| BKR | EXTENSION BRACKET |
| AMK | EXTERNAL LOCKING RING |
| ARP | EXTERNAL NPTF CONNECTION |
| ARQ | EXTERNAL PIPE CONNECTION |
| ARR | EXTERNAL PIPE THREAD 1/8 NPT |
| ARS | EXTERNAL STRAIGHT THREAD CONNECTION |
| AFT | EXTERNAL THREAD |
| BRW | EYEBOLT |
| BDL | EYELET |
| BXB | FACE |
| ALM | FACE HOLE FOR RIVET |
| ALN | FACE HOLE FOR ROD-NUT |
| BTY | FACE MOUNTING |
| CAN | FACE SPRAY RING |
| BQD | FASTENER |
| BJA | FASTENING DEVICE |
| BHY | FEET |
| BHK | FEMALE PLUG |
| BSC | FERRULE |
| ALC | FIXED |
| BXC | FIXED BASE |
| ALD | FIXED FLANGE |
| ACR | FLANGE |
| ARW | FLANGE BASE |
| BGT | FLANGE BOLTED |
| BGW | FLANGE RIVETED |
| AQE | FLANGE W/HOLE |
| BEN | FLANGE W/MOUNTING HOLE |
| BYL | FLANGE WITH DRILLED HOLE |
| AQF | FLANGE WITH THREADED HOLE |
| BYM | FLANGE WITHOUT HOLE |
| ART | FLARED TUBE CONNECTION |
| BPL | FLAT |
| ADT | FLAT BASE |
| ADW | FLAT FACE |
| ADX | FLAT FACE W/STUDS |
| ADY | FLAT SOLID BASE |
| AVA | FLAT SURFACE |
| AHE | FLEXIBLE TAB |
| BXV | FLOAT |
| ANY | FLOOR |
| BJW | FLOOR MORTISE |
| BKW | FLOOR TO CEILING |
| AGQ | FLUSH |
| ARX | FLUSH FLANGE |
| ARY | FLUSH PANEL |
| AUP | FLUSH PANEL W/ HOLES OR STUDS |
| AUQ | FLUSH RING |
| BKN | FOLDING STAND BY PIVOT PIN W/MANUAL LOCK |
| AEY | FOOT |
| ADJ | FORCE FIT |
| BRL | FORCE SPRING |
| BKK | FORK |
| AVQ | FOUR SLOT BRACKET |
| AFW | FRAME |
| BYN | FRAME WITH DRILLED HOLE |
| BYP | FRAME WITH THREADED HOLE |
| BEP | FREE STANDING BASE |
| ANZ | FREE STANDING ON CASTER |
| ABL | FRICTION |
| AUS | FRICTION FIT BEZEL RING |
| AML | FRICTION-SPRING |
| AFX | FRONT |
| AVS | FRONT BOARD |
| AVT | FRONT OF BOARD PANEL |
| AFY | FRONT SUPPORT BRACKET |
| AHG | FULL DOG SCREW |
| BFM | FULL OPENING CLAMP |
| BMP | GARTER SPRING |
| APX | GEARED HEAD |
| BCG | GIB |
| BXY | GIMBAL RING |
| AFZ | GLAND NUT |
| BKZ | GRAVITY |
| AWU | GROMMET |
| AMM | GROOVE |
| BMR | GROOVED FINGER TYPE |
| BTJ | GROUNDING LUG |
| BPQ | GUIDE PIN |
| BHF | GUSSET |
| BWN | GUY WIRE |
| AMV | HALTER |
| AGA | HAND HELD |
| AQX | HANDLE |
| AGR | HANGER |
| AUN | HANGING |
| BBW | HARNESS STRAP |
| AGB | HEADBAND |
| BEY | HEADGEAR |
| BJF | HELICAL STEEL SPRINGS |
| BNK | HEX HOLES |
| AGC | HINGE |
| BYX | HINGE PIN |
| AGD | HINGE W/FRICTION CATCH |
| BGJ | HINGE W/MOUNTING LEAF |
| AGE | HINGE W/SPRING LOADED LATCH |
| AGF | HINGE W/TOGGLE LATCH |
| ACP | HOLE |
| BLA | HOLE FOR SCREW |
| AGG | HOOK |
| CAZ | HOOK AND LOOP |
| ACK | HOOK AND PILE TAPE |
| BMK | HOOK-ON CUFF |
| ANM | HORIZONTAL SCREW |
| BEZ | HOSE |
| BBG | HOUSING |
| BSD | HUB |
| BNR | HYDRAULIC CYLINDER |
| BNT | IMMERSION WELL |
| AZL | IN BAR CUSHIONS SUSPENDED IN HELMET |
| CAY | INCLUSION |
| BPN | INDUSTRIAL, MULTI-PURPOSE |
| ARZ | INLET CONNECTION |
| ASA | INLET PIPE CONNECTION |
| BYQ | INLINE |
| BNW | INPUT PORT |
| AZJ | INSERT |
| ASB | INSERT TYPE STOP NUTS |
| ASC | INSERTED NUTS |
| AGS | INSIDE RIVET |
| AGT | INSIDE ROD |
| AEX | INSULATOR RING |
| AAB | INTEGRAL |
| BDD | INTEGRAL BOLT/NUT |
| BPW | INTEGRAL CLAMP |
| BFC | INTEGRAL KEY |
| BCS | INTEGRAL LAG SCREW |
| AGW | INTEGRAL LOCK SEAT |
| AVN | INTEGRAL MOUNTED |
| BCT | INTEGRAL STRAP W/SLOTTED HOLES |
| AGJ | INTEGRAL THREADED NUT |
| ALS | INTEGRAL W/RAILWAY CAR |
| ASS | INTERLOCKING TAPE STRAP |
| AQV | INTERNAL |
| AQK | INTERNAL BRACKET |
| BDX | INTERNAL FLANGE |
| BPY | INTERNAL PIPE THREAD |
| AGH | INTERNAL THREAD |
| BQA | INTERNAL THREAD CONNECTION |
| BEW | INTERNAL TIRE |
| CAR | INVERTED FLANGE |
| BKF | ISOLATOR VIBRATION |
| BRM | JACKSCREW |
| BXW | JACKSOCKET |
| BXX | JAM MUT |
| AQM | JETTISON TYPE |
| BFG | KEY |
| BSH | KEYED HOLE |
| BFD | KEYWAY |
| BFN | KNOTTED |
| BXS | KNURLED CYLINDRICAL |
| ANL | LACING HOOKS |
| BWA | LAG |
| AXW | LAMINATED STACK |
| BGX | LAP BOLTED |
| BGY | LAP RIVETED |
| BGZ | LAP STITCHED |
| AGK | LASHING EYE |
| CAL | LASHING TIE |
| BHR | LATCH |
| ACW | LATCH SPRING |
| AMN | LEAD BURNED |
| BGQ | LEATHER THONG |
| AWD | LEFT HAND |
| AGL | LEG |
| BMJ | LEG STRAPS |
| BJQ | LEGS |
| AZK | LIFT OFF |
| BNX | LINE |
| BQE | LIP |
| AZA | LOCK KNOB |
| ALE | LOCK PIN |
| BSJ | LOCK RING |
| BFE | LOCK RING GROOVE |
| AGM | LOCKING BUSHING |
| BTK | LOCKING BUSHING W/LOCATING FLAT |
| AGN | LOCKING BUSHING W/PANEL SEAL |
| AGP | LOCKING BUSHING W/SHAFT SEAL |
| APB | LOCKING STUD |
| ASD | LOCKNUT |
| ALT | LOCOMOTIVE |
| BDK | LOOP |
| AHM | LOOP CLAMP |
| BLX | LOOPS |
| AWR | LOWER BACK |
| AQB | LUBRICATION FITTING |
| ABN | LUG |
| BRE | LUG W/HOLE |
| BDE | MACHINE BOLT |
| BCW | MACHINE SCREW |
| AVU | MACHINED RECESS |
| BWF | MAGNET SURFACE |
| AHN | MAGNETIC |
| BHL | MALE PLUG |
| AMP | MALE PLUG INSERT |
| AHH | MALE PRONG |
| BRX | MAST |
| ACM | MECHANICAL DEVICE |
| ASE | METAL CASE FIXED |
| ASF | METAL CASE FLANGE |
| BQB | METAL CASE NONSEPARABLE SOCKET |
| ASG | METAL CASE RUBBER WASHER |
| ASH | METAL CASE SEPARABLE SOCKET |
| AUJ | METAL SNAPS |
| AMQ | MINIATURE BAYONET BASE |
| BHC | MOBILE |
| AWV | MODULE |
| BLL | MONORAIL |
| BFZ | MOUNTED BETWEEN BRACKETS |
| AAH | MOUNTING BRACKETS |
| AAJ | MOUNTING CLAMPS |
| BFF | MOUNTING EARS |
| AAK | MOUNTING FLANGES |
| AKS | MOUNTING PAD |
| AKW | MOUNTING PIN |
| BYY | MOUNTING PLATE |
| BSR | MOUNTING RING |
| AAL | MOUNTING SLOTS |
| BLP | MOUNTING STRIP |
| BSL | MOUNTING TAB |
| BDF | NAIL |
| BBX | NECK STRAP |
| ATV | NEXT LOWER SECTION |
| BRA | NONADJUSTABLE CLAMP |
| BRB | NONADJUSTABLE EAR |
| AYU | NONIRRITATING ADHESIVE |
| CAG | NONMETALLIC EYELETS |
| BHA | NOTCH LAP STITCHED |
| BXL | NOTCHED |
| ASJ | NPTF FITTING |
| BGA | NUT |
| AMR | NUT CONNECTED |
| BWB | NUT PLATE |
| APC | OCTAL BASE PLUG-IN |
| APD | OCTAL TUBE SOCKET |
| APE | ON 1/4 TON TRUCK |
| BLF | ON FOUR SUPPORTING LEGS |
| BKS | OPEN |
| AAM | OPEN END MOUNTING SLOTS |
| BJK | OPEN GEAR COMPOUND |
| BNY | OUTLET CONNECTION |
| BKX | OVERHEAD |
| BXD | PAD |
| BDN | PAIRS |
| AED | PANEL |
| ASK | PANEL FLANGE |
| BWC | PANEL REAR |
| ASM | PANEL W/SCREWS |
| BQJ | PEAR SHAPED HOLE |
| ASL | PEDESTAL |
| BMY | PEEN |
| BXZ | PELORUS STAND |
| AMS | PENDANT |
| AUE | PENDANT CABLE |
| BHJ | PIGMENTED |
| AAD | PIN |
| ASN | PIN CLIP |
| AHP | PIPE |
| ASP | PIPE FITTING |
| BRC | PIPE TEE |
| BBH | PIVOT |
| BJB | PLAIN HOLE |
| BYZ | PLAIN SHAFT |
| BZA | PLAIN SHAFT ACCOMMODATION |
| ASQ | PLASTIC CASE FIXED |
| AEE | PLATE |
| BSZ | PLATE WITH CAPTIVE SCREW LOCK |
| BKA | PLATFORM |
| APF | PLUG |
| ABP | PLUG-IN |
| AKX | PLUG-IN TERMINAL |
| BBJ | PLUG-IN W/RETAINING RING |
| AYX | POCKET |
| AXX | POINT CONTACT |
| BEA | PORTABLE |
| AST | PORTABLE METAL CASE |
| ASW | PORTABLE METAL CUP CASE |
| ASX | PORTABLE WOOD BACK |
| ASR | PORTABLE WOOD BACK CUP CASE |
| AYR | POSITIVE LATCH |
| BLE | POST |
| ABQ | POTTED |
| ADC | PRESS FIT |
| BGB | PRESS FIT BEARING |
| AUT | PRESSED ON |
| AUU | PRESSED ON W/ RETAINING BEZEL RING |
| AMT | PRESSURE |
| ASY | PRESSURE BOSS AND 10050-12 |
| CAE | PRESSURE SENSITIVE ADHESIVE |
| AKV | PRINTED BOARD |
| AEZ | PRINTED CIRCUIT |
| AUF | PRINTED CIRCUIT BOARD |
| BSW | PRINTED CIRCUIT TAB |
| BRQ | PRINTED CIRCUIT TERMINAL |
| AUM | PRINTED WIRING BOARD |
| AXU | PROFILE |
| BZN | PROJECTING TAB |
| AHJ | PRONG |
| BDZ | PULL ON |
| AVV | PULLEY SHAFT W/ HEX CAP NUT |
| ANU | PUSH FIT |
| AHQ | PUSH ON |
| BZV | PUSH PULL |
| BPE | PUSH ROD TUBE |
| AMW | PUSH SNAP-ON |
| CAP | QUAD PARALLEL NOZZLE HEADS |
| CAC | QUICK DISCONNECT |
| BRY | QUICK DISCONNECT COUPLING |
| BMX | QUICK DISCONNECT FASTENERS |
| ABR | RACK |
| BKY | RAIL |
| ADV | RAIL TRACK |
| BJR | RAILS |
| ALW | RAILWAY CAR |
| AHR | REAR SUPPORT BRACKET |
| BKT | RECESSED |
| BLG | RECESSED MOUNTING FLANGE |
| AKM | RECTANGULAR BASE |
| BWP | REEL |
| BKM | REMOTE |
| BNZ | REMOVABLE CLIP |
| BKB | RESILIENT |
| BXE | RESILIENT CRADLE |
| BXF | RESILIENT RING |
| AFV | RESISTORS MOUNTED BETWEEN TWO L-BRACKETS |
| AHS | RETAINER BLOCK |
| ABS | RETAINER RING |
| AMX | RETAINING CLAMP |
| AMY | RETAINING CLIP |
| BSK | RETAINING HOLE |
| ALV | RETAINING NUT |
| AHK | RETAINING PLATE |
| BGC | RETAINING RING |
| AWF | REVERSE |
| APG | RIGHT ANGLE FLANGE |
| AWE | RIGHT HAND |
| BHB | RIGID |
| BXG | RIGID CRADLE |
| BXH | RIGID RING |
| ASZ | RIGID STEM |
| BPK | RIM |
| BMS | RIM MOUNTING TOE CLAMPS |
| AHT | RING |
| AAG | RIVET |
| ABT | ROD |
| BES | ROD CLAMP |
| AAN | ROD END |
| ADZ | ROD W/BOLT |
| AUV | ROLLED RING NON REMOVABLE |
| BLY | ROLL-ON SHEATH |
| BLZ | ROLL-ON TAPE |
| ATU | ROOF TOP METAL BASE PLATE |
| ATA | RUBBER BUSHING |
| ATB | RUBBER GROMMET |
| AMZ | RUBBER LIP |
| BMA | RUBBER STRAP |
| AQU | RUBBER TRIM |
| ADE | SADDLE |
| AYS | SADDLE HOOK |
| AHW | SAFETY PIN |
| AKU | SASH CORDS |
| ABW | SCREW |
| AFU | SCREW AND WING NUT |
| AGY | SCREW CLAMP |
| BHG | SCREW HOLE |
| AGZ | SCREW LOCK |
| AVF | SCREW MOUNTED |
| BLB | SCREW ON |
| BPD | SCREW RING |
| ANA | SCREW STUD |
| BPT | SCREW THREADS |
| BLM | SCREW TYPE PINS |
| BZQ | SCREW W/NUT |
| BBQ | SCREWS ON TERMINAL BLOCK |
| AHX | SECTIONAL STANDARD |
| APV | SELF-GRIPPING |
| BHZ | SELF-LOCKING |
| BND | SELF-LOCKING COLLAR |
| ALF | SELF-LOCKING NUT |
| BJP | SELF-PROPELLED |
| AHY | SELF-TAPPING SCREW |
| AQY | SEMIFLUSH |
| ATC | SEMIFLUSH PANEL |
| AVR | SERRATED BEZEL |
| BXT | SERRATED CYLINDRICAL |
| CAX | SERRATED HOLE |
| BZB | SERRATED SHAFT |
| BZC | SERRATED SHAFT ACCOMMODATION |
| ABV | SERRATIONS |
| BWW | SERVED |
| AAF | SETSCREW |
| AYJ | SETSCREW LOCKING COLLAR |
| BFP | SEWED |
| AQZ | SHACKLE |
| ABX | SHAFT |
| AVB | SHAFT PIVOT |
| BNQ | SHAFT W/PANEL SEAL |
| BEF | SHANK |
| ARA | SHEAVES |
| AEQ | SHEET METAL SCREW |
| ALG | SHELF |
| AQL | SHELL |
| APH | SHOCK |
| BYC | SHOCK MOUNT |
| BJX | SHOCK MOUNT BASE |
| ARB | SHOCKPROOF BASE |
| ARM | SHOCKPROOF CASE |
| BHD | SHOULDER |
| BHT | SHRINK FIT |
| AGX | SIDE |
| BXM | SIDE PLATE |
| BZD | SIDE SETSCREW |
| BJL | SILICONE |
| BDM | SINGLE |
| BJG | SINGLE TIRE |
| BJH | SINGLE-DUAL TIRE |
| BCJ | SKID |
| BYD | SKIRT |
| AKC | SLEEVE |
| AHZ | SLIDE |
| BMB | SLIDE FASTENER |
| AYT | SLIDE HOOK |
| AJC | SLIDE OFF HINGE W/FRICTION CATCH |
| AJD | SLIDE OFF HINGE W/SPRING LOADED LATCH |
| AJB | SLIDE OFF HINGE W/TOGGLE LATCH |
| AJA | SLIDE OVER FLANGE |
| ACL | SLIDE RAIL |
| AWB | SLIDE SUPPORT |
| BWK | SLIDE TRACK |
| ASV | SLIDING INTO ADJOINING SECTION |
| BZE | SLIDING LOCK |
| ALH | SLIDING RAIL |
| ARC | SLING |
| AUW | SLIP |
| AUX | SLIP RING |
| ARU | SLIP-ON TAPE AND TIE |
| ANB | SLIPS-ON |
| BHS | SLIT |
| ABY | SLOT |
| BCM | SLOT ON HOOK |
| BGD | SLOTTED |
| BCX | SLOTTED HOLE |
| AVX | SLOTTED HUB CLAMP |
| BZF | SLOTTED SHAFT |
| BBK | SNAP |
| AZB | SNAP BRACKET |
| AJE | SNAP BUTTON |
| AJF | SNAP FASTENER |
| AYW | SNAP LOCK |
| AHL | SNAP RING |
| BDR | SNAP SLIDE |
| AQG | SNAP SLIDE FASTENER |
| ACY | SNAP SPRING |
| AZF | SNAP SPRING HOLDER |
| ADF | SNAP-IN |
| AJG | SNAP-IN CATCH |
| BSX | SNAP-IN CUP |
| ANC | SNAP-ON |
| AEF | SOCKET |
| BQF | SOCKET SNAP FASTENER |
| BPZ | SOCKET STEM |
| AND | SOCKET SWEATED |
| AJY | SOCKET TERMINAL |
| AHA | SOLDER |
| BST | SOLDER BUSHING |
| ANE | SOLDER CLIP |
| BQC | SOLDER FLANGE |
| AGV | SOLDER LUG MOUNTED |
| AVE | SOLDER MOUNTED |
| BSQ | SOLDER TAB |
| AHU | SOLDER WIRE LEAD |
| BGE | SOLDERED |
| ABZ | SPACER |
| BSE | SPADE BOLT |
| BSF | SPADE LUG |
| AUD | SPECIAL DISCONNECT COUPLING |
| AJH | SPEED NUT |
| BZG | SPINDLE |
| AVW | SPINDLE ASSEMBLY |
| BEK | SPLICE |
| BEL | SPLICED/SERVED |
| BDT | SPLICER |
| ADA | SPLINE |
| AVK | SPLIT CABLE GLAND |
| BGF | SPLIT-TAPERED BUSHING |
| BTE | SPOOL |
| AER | SPRING |
| AAV | SPRING ACTION |
| AVG | SPRING ACTION MOUNTED |
| ACA | SPRING CLAMP |
| ANF | SPRING CLIP |
| AHB | SPRING CONTACT |
| BMZ | SPRING LOADED BALL |
| AJJ | SPRING LOADED PIN |
| BZH | SPRING PIN |
| AZC | SPRING SNAP |
| AJK | SPRING TENSION |
| BDG | SPRING TENSION FASTENER |
| BYE | SPRING WASHER |
| BRN | SPRINGLOCK FASTENER |
| BXN | SQUARE HOLES |
| AAP | SQUARE MOUNTING HOLES |
| CAM | STACKING |
| AJL | STAKE |
| BEX | STAKE POCKET |
| BGG | STAKED |
| AJM | STAND |
| APJ | STANDARD 19 IN. PANEL |
| AJN | STANDARD BUSHING |
| AJP | STANDARD BUSHING W/PANEL SEAL |
| AJQ | STANDARD BUSHING W/SHAFT SEAL |
| BNE | STANDARD BUSHING W/SLOTS |
| APK | STANDARD OCTAL SOCKET |
| BCY | STAND-OFF |
| BEB | STATIONARY |
| BLN | STATIONARY POST |
| BLJ | STATIONARY SHEAVE |
| ASU | STECKBAR |
| BFK | STEEL |
| BCK | STEEL FRAME |
| BGL | STEEL PANEL |
| AUR | STEM |
| ATD | STOP NUTS |
| AWS | STRAIGHT |
| AWT | STRAIGHT BOTTOM |
| BQK | STRAIGHT CLOSED SLOT |
| AWW | STRAIGHT FORM STEM 90 DEGREE TO LEFT |
| BQL | STRAIGHT OPEN END SLOT |
| AWX | STRAIGHT PARALLEL TO DIAL FACE |
| ATE | STRAIGHT PIPE THREAD |
| AYK | STRAIGHT SLEEVE |
| AWY | STRAIGHT STEM |
| ACB | STRAP |
| ACU | STRAP AND SNAP HOOK |
| APL | STRAPPED |
| BMC | STRAPS/BUCKLES |
| ANG | STRIKE FASTENER |
| ANK | STRIP |
| AJR | STRUT |
| AAE | STUD |
| BQG | STUD SNAP FASTENER |
| BZZ | SUB-PLATE |
| BWQ | SUCTION |
| BZX | SUPPORT BASE |
| AJS | SUPPORT ROD |
| AEG | SURFACE |
| AWC | SURFACE PANEL |
| ATF | SURFACE WALL |
| AZM | SUSPENDED ON ADJUSTABLE HEADBAND |
| AZN | SUSPENDED ON HEADBAND |
| AJT | SUSPENSION |
| BMD | SUSPENSORY |
| CAU | SWAG BRACE |
| BCZ | SWAGE |
| AHC | SWEATED |
| BNS | SWING JOINT |
| BKC | SWITCHBOARD |
| AJW | SWIVEL |
| BLH | SWIVEL BASE |
| BBL | SWIVEL BRACKET |
| BXJ | SWIVEL NUT COUPLING |
| ACC | TAB |
| BTP | TAB EAR |
| ARD | TABLE |
| BRF | TAPE |
| AMU | TAPE HOOK FASTENER |
| AVY | TAPER LOCK |
| BJC | TAPERED HOLE |
| BZR | TAPERED PIN |
| BSG | TAPERED SLOT |
| BGH | TAPERED-LOCK BUSHING |
| BDA | TAPPED |
| BEG | TEE BOLT |
| BKP | TELESCOPING SELF-LOCKING SUPPORT |
| AJX | TENSION |
| ACD | TERMINAL |
| BBR | TERMINAL BLOCK SLOTS |
| BBT | TERMINAL BLOCK UNTHREADED HOLES |
| AQR | TERMINAL BOARD |
| BRG | TERMINAL LUG |
| BSY | TERMINAL SCREW |
| BEQ | TERMINAL W/MOUNTING HOLES |
| BPA | TERMINAL, WIRE-LEAD |
| ALU | THERMOSTAT BASEPLATE |
| BME | THIGH STRAPS |
| ACS | THREAD |
| CAD | THREADED ADAPTER |
| ANV | THREADED ARM |
| BLD | THREADED AXIAL STUD |
| ACE | THREADED BASE |
| AKY | THREADED BEZEL |
| AES | THREADED BODY |
| ATG | THREADED BOSS |
| AFA | THREADED BUSHING |
| AJZ | THREADED BUSHING W/PANEL SEAL |
| BKJ | THREADED BUSHING, SPLIT LOCKING |
| BYA | THREADED CASE |
| AKA | THREADED CATCH |
| BTF | THREADED CENTER HOLE |
| BYR | THREADED CENTER POST |
| BTG | THREADED COUNTERBORED CENTER HOLE |
| AAR | THREADED COUNTERBORED MOUNTING HOLES |
| BTH | THREADED COUNTERSUNK CENTER HOLE |
| BNL | THREADED COUNTERSUNK MOUNTING HOLES |
| APZ | THREADED COUPLING |
| AVH | THREADED DIAL APERATURE |
| AKB | THREADED FASTENER |
| AKD | THREADED FASTENER W/WEDGE NUT |
| AHF | THREADED HOLE |
| BPH | THREADED HUB |
| ATH | THREADED INLET CONNECTION |
| ACH | THREADED INSERT |
| ATJ | THREADED MALE CONNECTION |
| AAQ | THREADED MOUNTING HOLES |
| AAS | THREADED MOUNTING INSERTS |
| BNM | THREADED MOUNTING NUTS |
| AAW | THREADED MOUNTING STUDS |
| ATK | THREADED NECK |
| BXP | THREADED NUT |
| BPX | THREADED OUTSIDE DIAMETER |
| BCL | THREADED PIN |
| ATL | THREADED PIPE CONNECTION |
| ARG | THREADED PLUG |
| AYD | THREADED RECEPTACLE |
| BDY | THREADED RING |
| BTD | THREADED ROD |
| BZJ | THREADED SHAFT |
| BZK | THREADED SHAFT ACCOMMODATION |
| BFH | THREADED SHANK |
| AYM | THREADED SLEEVE |
| ATM | THREADED SOCKET |
| ARJ | THREADED SPINDLE NOSE |
| BYS | THREADED SPIN-ON CENTERED HOLE |
| ATN | THREADED STEM |
| AET | THREADED STUD |
| AVP | THREADED STUD MOUNTED |
| AKE | THREADED TUBE |
| AAT | THREADED, INTERNAL, MOUNTING STANDOFFS |
| ABA | THREADLESS MOUNTING STUDS |
| BBM | THROAT STRAP |
| AGU | THRU-BOLT |
| AZG | THUMB SCREW |
| CAF | TIE STRAPS |
| ACN | TIES |
| BMF | TIES AT WAIST AND THIGH |
| BKL | TONGUE |
| BEH | TOOL CARRIAGE |
| BEJ | TOOL POST |
| ALJ | TOP |
| BCF | TOP DRILLED-COUNTERSUNK HOLES |
| ATP | TOP HOOK |
| BZL | TOP SCREW |
| ALK | TOP W/ADJUSTABLE LEGS |
| BYT | TRACK |
| AAX | TRACK MOUNTING |
| ALP | TRACTOR |
| ALQ | TRAILER |
| AKN | TRIANGULAR LEG |
| AKF | TRIPOD |
| BJD | TROLLEY |
| BLK | TROLLEY RAIL |
| AWA | TROUGH |
| ALR | TRUCK |
| AKG | TRUNNION |
| ANH | TUB CLIP |
| ACJ | TUBE |
| BBN | TUBE ATTACHED TO EARPHONE HANDLE |
| APN | TUBE BASE |
| APP | TUBE SOCKET |
| BEC | TUBE STAND |
| AZD | TUBE W/QUICK RELEASE PIN |
| ALL | TUBULAR |
| BGP | TURNLOCK FASTENER |
| AQN | TURNLOCK FASTENER RECEPTACLE |
| BWG | TURRET CASE WITH FLUSH RING |
| CAQ | TWIN PARALLEL NOZZLE HEADS |
| BTT | TWIST EAR |
| AHD | TWIST LOCK |
| BTL | TWIST LUG |
| BTM | TWIST PRONG |
| BPM | TWIST TAB |
| APQ | TWO MTG EARS ON CASE |
| BKQ | TWO-PIECE RIGID UPRIGHT |
| BCH | TWO-WHEEL TRAILER |
| AEU | U BRACKET W/SCREW |
| BDB | U-BOLT |
| BYB | U-CHANNEL |
| BWH | U-CLAMP |
| ATQ | UNION CONNECTION |
| ARE | UNIVERSAL |
| BET | UNIVERSAL CLAMP |
| AUC | UNIVERSAL ROUND ADAPTER PLATE |
| BRD | UNIVERSAL STRAP |
| AYL | UNTHREADED |
| BTW | UNTHREADED BUSHING |
| AAY | UNTHREADED COUNTERBORED MOUNTING HOLES |
| BNN | UNTHREADED COUNTERSUNK MOUNTING HOLES |
| ACQ | UNTHREADED HOLE |
| AAZ | UNTHREADED MOUNTING HOLES |
| AEW | UNTHREADED STUD |
| BNP | UNTHREADED THRU-HOLE MOUNTING STANDOFFS |
| AUB | UPPER SECTION |
| CAV | VENT |
| ATR | VENT HOLE PLUG |
| AKJ | VERTICAL ROD |
| APU | VERTICAL SCREW |
| BDW | VIEWER |
| AKH | V-SPRING |
| AZE | W/SWIVEL SLIDE AND DETENT ACTION |
| BWX | WAFER |
| BMG | WAISTBELT |
| BMH | WAISTBELT, FLEXIBLE TOP W/PENILE STRENGTH |
| ATS | WALL |
| AEJ | WALL BRACKET |
| ATT | WALL FLANGE |
| CAJ | WALL MOUNTED |
| BZW | WALL PLATE |
| BZY | WALL RECESSED |
| BPF | WASHER |
| BJM | WATER PUMP |
| ARF | WAVEGUIDE |
| BYF | WEDGE |
| AKK | WELDED |
| AKT | WELDING PROJECTION |
| ACV | WELD-ON |
| AUY | WESTON STYLE |
| AKP | WHEEL |
| BJN | WHEEL BEARING |
| AYE | WING W/BOTTOM FLANGE |
| BRH | WIRE |
| ANJ | WIRE BALE |
| AHV | WIRE LEAD |
| CAB | WIRE LOOPS |
| BFJ | WOOD |
| BWJ | WOOD BACK, FIXED MOUNTING |
| ATW | WOOD CASE PORTABLE |
| BGK | WOOD PANEL |
| BDC | WOOD SCREW |
| BML | WRAPAROUND SLEEVE |
| BBP | YOKE |
BWLM*DHANDLE SOCKET ADJUSTABILITY
AN INDICATION OF WHETHER OR NOT THE HANDLE SOCKET IS ADJUSTABLE.
Enter the applicable reply code from the table below
(BWLMDC)
| Table 1 |
| Reply Code (AB00) | Reply |
| A | ADJUSTABLE |
| C | NONADJUSTABLE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDEYU)
| Table 1 |
| Reply Code (AN47) | Reply |
| EYU | MEETS/EXCEEDS AFFIRMATIVE PROCUREMENT PROGRAM REQUIREMENTS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDJF)
| Table 1 |
| Reply Code (EN02) | Reply |
| JF | COMPREHENSIVE PROCUREMENT GUIDELINE - PAPER AND PAPER PRODUCTS - COMMERCIAL/INDUSTRIAL SANITARY TISSUE PRODUCTS |
PPRM*BPOST-CONSUMER RECOVERED MATERIALS PERCENTAGE
THE PERCENTAGE OF THE POST-CONSUMER RECOVERED OR RECYCLED MATERIAL INCLUDED IN THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(PPRMB2.0)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ008*;HZRDDHAZ019$$DHAZ019*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ008 | CADMIUM |
| HAZ019 | FIBER VEGETABLE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information