A close-coiled helical extension spring, with ends fastened together to form a circle, designed to impose compression stresses toward the center of the circle thus formed when uniformly expanded.
expandFSC Information
5360Coil, Flat, Leaf, and Wire Springs
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 2AA deleted from MRC SFTT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AC deleted from MRC SFTT.
ISAC Reply 2AD deleted from MRC SFTT.
ISAC Reply 2AE deleted from MRC SFTT.
ISAC Reply 2AF deleted from MRC SFTT.
ISAC Reply 2AG deleted from MRC SFTT.
ISAC Reply 2AH deleted from MRC SFTT.
ISAC Reply 2AJ deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 2AA deleted from MRC STDC.
ISAC Reply 2AB deleted from MRC STDC.
ISAC Reply 2AC deleted from MRC STDC.
ISAC Reply 2AD deleted from MRC STDC.
ISAC Reply 2AE deleted from MRC STDC.
ISAC Reply 2AF deleted from MRC STDC.
ISAC Reply 2AG deleted from MRC STDC.
ISAC Reply 2AH deleted from MRC STDC.
ISAC Reply 2AJ deleted from MRC STDC.
ISAC Reply 3ACK added to MRC ABQK.
ISAC Reply 3AEE added to MRC ABQK.
ISAC Reply 3AET added to MRC ABQK.
ISAC Reply 3AEU added to MRC ABQK.
ISAC Reply 3AEV added to MRC ABQK.
ISAC Reply 3ESL added to MRC ABQK.
ISAC Reply 3HOU added to MRC ABQK.
ISAC Reply 2AA deleted from MRC ABQK.
ISAC Reply 2AB deleted from MRC ABQK.
ISAC Reply 2AC deleted from MRC ABQK.
ISAC Reply 2AD deleted from MRC ABQK.
ISAC Reply 2AE deleted from MRC ABQK.
ISAC Reply 2AF deleted from MRC ABQK.
ISAC Reply 2AG deleted from MRC ABQK.
ISAC Reply 2AH deleted from MRC ABQK.
ISAC Reply 2AJ deleted from MRC ABQK.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED04225*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDCU0157*;MATT3AEEDCU0157$DNL0019*;MATT3AEEDCU0157$$DNL0019*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL1100ALUMINUM ALLOY 1100
AL1230ALUMINUM ALLOY 1230
AL2011ALUMINUM ALLOY 2011
AL2014ALUMINUM ALLOY 2014
AL2017ALUMINUM ALLOY 2017
AL2018ALUMINUM ALLOY 2018
AL2024ALUMINUM ALLOY 2024
AL2025ALUMINUM ALLOY 2025
AL2218ALUMINUM ALLOY 2218
AL2219ALUMINUM ALLOY 2219
AL2618ALUMINUM ALLOY 2618
AL3003ALUMINUM ALLOY 3003
AL4032ALUMINUM ALLOY 4032
AL5052ALUMINUM ALLOY 5052
AL5083ALUMINUM ALLOY 5083
AL5456ALUMINUM ALLOY 5456
AL6061ALUMINUM ALLOY 6061
AL6062ALUMINUM ALLOY 6062
AL6066ALUMINUM ALLOY 6066
AL6151ALUMINUM ALLOY 6151
AL6262ALUMINUM ALLOY 6262
AL7049ALUMINUM ALLOY 7049
AL7072ALUMINUM ALLOY 7072
AL7075ALUMINUM ALLOY 7075
AL7076ALUMINUM ALLOY 7076
CRA000CHROMIUM
CTB000COBALT ALLOY
CT0019COBALT COMP 25
CT0004COBALT COMP 6
CUA000COPPER
CUB000COPPER ALLOY
CU0068COPPER ALLOY 170
CU0069COPPER ALLOY 172
CU0233COPPER ALLOY 173
CU1005COPPER ALLOY 2.0490
CU0263COPPER ALLOY 210
CU0264COPPER ALLOY 220
CU0074COPPER ALLOY 230
CU0076COPPER ALLOY 240
CU0079COPPER ALLOY 260
CU0080COPPER ALLOY 268
CU0081COPPER ALLOY 270
CU0274COPPER ALLOY 274
CU0091COPPER ALLOY 360
CU0098COPPER ALLOY 462
CU0099COPPER ALLOY 464
CU0100COPPER ALLOY 482
CU0101COPPER ALLOY 485
CU0501COPPER ALLOY 501
CU0509COPPER ALLOY 509
CU0103COPPER ALLOY 510
CU0104COPPER ALLOY 511
CU0105COPPER ALLOY 521
CU0106COPPER ALLOY 524
CU0107COPPER ALLOY 532-CANCELED
CU0108COPPER ALLOY 534
CU0109COPPER ALLOY 544
CU0131COPPER ALLOY 655
CU0148COPPER ALLOY 745
CU0150COPPER ALLOY 752
CU0757COPPER ALLOY 757
CU0152COPPER ALLOY 764
CU0157COPPER ALLOY 770
CU0162COPPER ALLOY 794
AUA000GOLD
FEA000IRON
FEF000IRON ALLOY
FEB000IRON CAST
FE0178IRON CAST COMP 0.7040
FEC000IRON MALLEABLE
PBA000LEAD
NLA000NICKEL
NL0089NICKEL ALL0Y UNS N06003
NLB000NICKEL ALLOY
NL0042NICKEL ALLOY 201
NL0008NICKEL ALLOY 400
NL0019NICKEL ALLOY 502
NL0009NICKEL ALLOY 600
NL0010NICKEL ALLOY 718
NL0059NICKEL ALLOY 800
NL0061NICKEL ALLOY 825
NL0021NICKEL ALLOY 902
NL0062NICKEL ALLOY CG27
NL0054NICKEL ALLOY FM92
NL0018NICKEL ALLOY K-500
NL0126NICKEL ALLOY NI-CR 22 MOO9NBO9
NL0017NICKEL ALLOY R-405
NL0093NICKEL ALLOY UNS N08810
NL0007NICKEL ALLOY X-750
SLC000SILICON
STA000STEEL
ST0800STEEL COMP 1.0501
ST1974STEEL COMP 1.0605
ST1823STEEL COMP 1.0904
ST0845STEEL COMP 1.1181
ST0849STEEL COMP 1.1231
ST1824STEEL COMP 1.1248
ST0819STEEL COMP 1.4021
ST0856STEEL COMP 1.4057
ST0821STEEL COMP 1.4300
ST0822STEEL COMP 1.4301
ST0379STEEL COMP 1.4305
ST0823STEEL COMP 1.4310
ST0824STEEL COMP 1.4401
ST0866STEEL COMP 1.6900
ST1006STEEL COMP 1006
ST1008STEEL COMP 1008
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1017STEEL COMP 1017
ST1018STEEL COMP 1018
ST1019STEEL COMP 1019
ST1020STEEL COMP 1020
ST1021STEEL COMP 1021
ST1022STEEL COMP 1022
ST1023STEEL COMP 1023
ST0493STEEL COMP 1023W
ST1025STEEL COMP 1025
ST1026STEEL COMP 1026
ST1029STEEL COMP 1029
ST1030STEEL COMP 1030
ST1031STEEL COMP 1031
ST1033STEEL COMP 1033
ST1034STEEL COMP 1034
ST1035STEEL COMP 1035
ST1037STEEL COMP 1037
ST1038STEEL COMP 1038
ST1039STEEL COMP 1039
ST1040STEEL COMP 1040
ST1042STEEL COMP 1042
ST1043STEEL COMP 1043
ST1045STEEL COMP 1045
ST1046STEEL COMP 1046
ST1049STEEL COMP 1049
ST1050STEEL COMP 1050
ST1053STEEL COMP 1053
ST1055STEEL COMP 1055
ST1060STEEL COMP 1060
ST1062STEEL COMP 1062
ST1064STEEL COMP 1064
ST1065STEEL COMP 1065
ST1069STEEL COMP 1069
ST1070STEEL COMP 1070
ST1074STEEL COMP 1074
ST1075STEEL COMP 1075
ST1078STEEL COMP 1078
ST1080STEEL COMP 1080
ST1084STEEL COMP 1084
ST1085STEEL COMP 1085
ST1086STEEL COMP 1086
ST1090STEEL COMP 1090
ST1095STEEL COMP 1095
ST1108STEEL COMP 1108
ST1109STEEL COMP 1109
ST1110STEEL COMP 1110
ST1115STEEL COMP 1115
ST1116STEEL COMP 1116
ST1117STEEL COMP 1117
ST1118STEEL COMP 1118
ST1119STEEL COMP 1119
ST1120STEEL COMP 1120
ST1125STEEL COMP 1125
ST1126STEEL COMP 1126
ST1132STEEL COMP 1132
ST1137STEEL COMP 1137
ST1138STEEL COMP 1138
ST1140STEEL COMP 1140
ST1141STEEL COMP 1141
ST1144STEEL COMP 1144
ST1145STEEL COMP 1145
ST1146STEEL COMP 1146
ST1151STEEL COMP 1151
ST1211STEEL COMP 1211
ST1212STEEL COMP 1212
ST1213STEEL COMP 1213
ST1315STEEL COMP 1315
ST1340STEEL COMP 1340
ST0547STEEL COMP 135M
ST1524STEEL COMP 1524
ST1527STEEL COMP 1527
ST1536STEEL COMP 1536
ST1541STEEL COMP 1541
ST1548STEEL COMP 1548
ST1551STEEL COMP 1551
ST1552STEEL COMP 1552
ST1561STEEL COMP 1561
ST1566STEEL COMP 1566
ST1572STEEL COMP 1572
ST0202STEEL COMP 202
ST0301STEEL COMP 301
ST0302STEEL COMP 302
ST0180STEEL COMP 302B
ST0303STEEL COMP 303
ST0079STEEL COMP 303SE
ST0304STEEL COMP 304
ST0080STEEL COMP 304L
ST0449STEEL COMP 304N
ST0305STEEL COMP 305
ST0152STEEL COMP 308
ST0309STEEL COMP 309
ST0153STEEL COMP 309S
ST0310STEEL COMP 310
ST0154STEEL COMP 310S
ST3135STEEL COMP 3135
ST0155STEEL COMP 314
ST3140STEEL COMP 3140
ST3145STEEL COMP 3145
ST0316STEEL COMP 316
ST0082STEEL COMP 316L
ST0451STEEL COMP 316N
ST0317STEEL COMP 317
ST0321STEEL COMP 321
ST0322STEEL COMP 322
ST0324STEEL COMP 324
ST0347STEEL COMP 347
ST0348STEEL COMP 348
ST0384STEEL COMP 384
ST0403STEEL COMP 403
ST0405STEEL COMP 405
ST4063STEEL COMP 4063
ST4068STEEL COMP 4068
ST0410STEEL COMP 410
ST0229STEEL COMP 4118H
ST4130STEEL COMP 4130
ST4135STEEL COMP 4135
ST0414STEEL COMP 414
ST4140STEEL COMP 4140
ST0093STEEL COMP 4140H
ST4150STEEL COMP 4150
ST0097STEEL COMP 4150H
ST0416STEEL COMP 416
ST0099STEEL COMP 416SE
ST0420STEEL COMP 420
ST0429STEEL COMP 429
ST0430STEEL COMP 430
ST0101STEEL COMP 430F
ST0172STEEL COMP 430FSE
ST0431STEEL COMP 431
ST0105STEEL COMP 440A
ST0106STEEL COMP 440B
ST0107STEEL COMP 440C
ST0108STEEL COMP 440F
ST0285STEEL COMP 440FSE
ST0446STEEL COMP 446
ST0114STEEL COMP 50B60
ST0164STEEL COMP 50B60H
ST5130STEEL COMP 5130
ST0119STEEL COMP 5132H
ST5147STEEL COMP 5147
ST5150STEEL COMP 5150
ST5152STEEL COMP 5152
ST5155STEEL COMP 5155
ST5160STEEL COMP 5160
ST0124STEEL COMP 5160H
ST0115STEEL COMP 51B60
ST0116STEEL COMP 51B60H
ST6145STEEL COMP 6145
ST6150STEEL COMP 6150
ST0129STEEL COMP 6150H
ST0630STEEL COMP 630
ST0631STEEL COMP 631
ST0633STEEL COMP 633
ST0634STEEL COMP 634
ST8630STEEL COMP 8630
ST8640STEEL COMP 8640
ST8650STEEL COMP 8650
ST0143STEEL COMP 8650H
ST8653STEEL COMP 8653
ST0672STEEL COMP 8653H
ST8655STEEL COMP 8655
ST0144STEEL COMP 8655H
ST8660STEEL COMP 8660
ST0145STEEL COMP 8660H
ST8730STEEL COMP 8730
ST8740STEEL COMP 8740
ST8750STEEL COMP 8750
ST9250STEEL COMP 9250
ST9254STEEL COMP 9254
ST9255STEEL COMP 9255
ST9260STEEL COMP 9260
ST0245STEEL COMP 9260H
ST9261STEEL COMP 9261
ST9262STEEL COMP 9262
ST1802STEEL COMP 945A
ST1803STEEL COMP 945C
ST1805STEEL COMP 950A
ST1806STEEL COMP 950B
ST1807STEEL COMP 950C
ST1808STEEL COMP 950D
ST0151STEEL COMP 9850H
ST0028STEEL COMP E4340
ST1901STEEL COMP E6150
ST0043STEEL COMP H11
ST0344STEEL COMP T7
ST0794STEEL COMP XC70
ST0702STEEL COMP XM-10
ST0703STEEL COMP XM-11
ST0187STEEL COMP XM-13
ST0707STEEL COMP XM-16
ST0712STEEL COMP XM-21
ST0715STEEL COMP XM-26
STB000STEEL CORROSION RESISTING
ST1336STEEL UNS K06000
ST1784STEEL UNS K06500
ST1341STEEL UNS K06501
ST0667STEEL UNS K06701
ST0627STEEL UNS K07001
ST0668STEEL UNS K08500
ST1372STEEL UNS K11598
ST0542STEEL UNS K11801
ST1479STEEL UNS K15047
ST1480STEEL UNS K15048
ST1481STEEL UNS K15590
ST0566STEEL UNS K21590
ST0695STEEL UNS K92940
ST1083STEEL UNS T12001
TTB000TITANIUM
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AATBODY
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
QAEROSPACE MATERIAL SPEC STD
JAMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP18)Reply
M10TH MATERIAL RESPONSE
N11TH MATERIAL RESPONSE
P12TH MATERIAL RESPONSE
Q13TH MATERIAL RESPONSE
R14TH MATERIAL RESPONSE
S15TH MATERIAL RESPONSE
T16TH MATERIAL RESPONSE
U17TH MATERIAL RESPONSE
W18TH MATERIAL RESPONSE
X19TH MATERIAL RESPONSE
B1ST MATERIAL RESPONSE
Y20TH MATERIAL RESPONSE
Z21ST MATERIAL RESPONSE
V22ND MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
H6TH MATERIAL RESPONSE
J7TH MATERIAL RESPONSE
K8TH MATERIAL RESPONSE
L9TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDNLC000*;SFTT3AEEDNLC000$DAL6061*;SFTT3AEEDNLC000$$DAL6061*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (SF01)Reply
ALA000ALUMINUM ALLOY
AL6061ALUMINUM ALLOY 6061
ANA000ANODIZE
CPB000ASPHALT
CDA000CADMIUM
CMA000CHROMATE
CMB000CHROMATE ZINC
CRA000CHROMIUM
CUA000COPPER
CUB000COPPER ALLOY
DCA000DICHROMATE
DCC000DICHROMATE ZINC
ENA000ENAMEL
END000ENAMEL BAKED
ENB000ENAMEL LUSTERLESS
ENF000ENAMEL SEMIGLOSS
AUA000GOLD
LQA000LACQUER
PBA000LEAD
MNA000MANGANESE
NLA000NICKEL
NLC000NICKEL ALLOY
LCA000OIL
XXB000OXIDE
XXE000OXIDE COPPER
PNA000PAINT
PSA000PASSIVATE
PHA000PHOSPHATE
PHC000PHOSPHATE MANGANESE
PHD000PHOSPHATE ZINC
PCA000PLASTIC
PCB000PLASTIC POLYTETRAFLUOROETHYLENE
PRA000PRIMER
RHA000RHODIUM
RCB000RUBBER SYNTHETIC
AGA000SILVER
SNA000TIN
VAA000VARNISH
ZNA000ZINC
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP39)Reply
M10TH TREATMENT RESPONSE
N11TH TREATMENT RESPONSE
P12TH TREATMENT RESPONSE
Q13TH TREATMENT RESPONSE
R14TH TREATMENT RESPONSE
S15TH TREATMENT RESPONSE
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
H6TH TREATMENT RESPONSE
J7TH TREATMENT RESPONSE
K8TH TREATMENT RESPONSE
L9TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
IF STYLE/REPLY CODE(s) D1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AXLQ and AARX)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLD1)
Table 1
Physical Drawing IDReply Code (STYL)Reply
BG10016D1CIRCULAR
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAA2.0*;AARXJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AXLQ*JSPRING FREE OUTSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AXLQJAA2.0*;AXLQJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABQKLEND STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE END.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(ABQK3ACKLH1*;ABQK3ACKLH1$LH2*;ABQK3ACKLH1$$LH2*)
Table 1
ISAC Field Indicator (5000)Location
3ACKBUSHING
3AEEOVERALL
3AETFIRST END
3AEUSECOND END
3AEVBOTH ENDS
3ESLLUBRICATION FITTINGS
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Physical Drawing IDReply Code (STYL)Reply
BG10122H1ONE REDUCED END
BG10123H2UNIFORM SIZE ENDS
ACVU*JSTOCK DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE STOCK,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACVUJAB2.0*;ACVUJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ACVV*JSTOCK WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE STOCK,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACVVJAC2.0*;ACVVJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ACVW*JSTOCK THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE STOCK,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACVWJAB2.0*;ACVWJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AXLP*JSPRING DEFLECTION RATE
THE WEIGHT,PER SPECIFIC MEASUREMENT SCALE,REQUIRED TO DEFLECT THE SPRING.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AXLPJLHB2.0*;AXLPJLHB2.0$$JLHB2.1*)
Table 1
Reply Code (AG67)Reply
KRGRAMS PER MILLIMETER
CNKILOGRAMS PER MILLIMETER
LHNEWTONS PER MILLIMETER
KQOUNCES PER INCH
CMPOUNDS PER INCH
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDAUA000$DIRA000*;PRMTDAUA000$$DIRA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPTA000E2.0*;PMWTJPTA000E2.0$$JPTA000E2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)