A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning.May include provisions for locking.See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3ACK added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEQ added to MRC MATT.
ISAC Reply 3AVU added to MRC MATT.
ISAC Reply 3ESD added to MRC MATT.
ISAC Reply 3ESE added to MRC MATT.
ISAC Reply 3ESF added to MRC MATT.
ISAC Reply 3ESH added to MRC MATT.
ISAC Reply 3ESI added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ACK added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AEQ added to MRC MDCL.
ISAC Reply 3AVU added to MRC MDCL.
ISAC Reply 3ESD added to MRC MDCL.
ISAC Reply 3ESE added to MRC MDCL.
ISAC Reply 3ESF added to MRC MDCL.
ISAC Reply 3ESH added to MRC MDCL.
ISAC Reply 3ESI added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3ACK added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3AEQ added to MRC SFTT.
ISAC Reply 3ESD added to MRC SFTT.
ISAC Reply 3ESE added to MRC SFTT.
ISAC Reply 3ESI added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 2AA deleted from MRC SFTT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AC deleted from MRC SFTT.
ISAC Reply 2AD deleted from MRC SFTT.
ISAC Reply 2AE deleted from MRC SFTT.
ISAC Reply 2AF deleted from MRC SFTT.
ISAC Reply 2AH deleted from MRC SFTT.
ISAC Reply 2AJ deleted from MRC SFTT.
ISAC Reply 2AL deleted from MRC SFTT.
ISAC Reply 2AM deleted from MRC SFTT.
ISAC Reply 2AN deleted from MRC SFTT.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3ACK added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3AEQ added to MRC STDC.
ISAC Reply 3ESD added to MRC STDC.
ISAC Reply 3ESE added to MRC STDC.
ISAC Reply 3ESI added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 2AA deleted from MRC STDC.
ISAC Reply 2AB deleted from MRC STDC.
ISAC Reply 2AC deleted from MRC STDC.
ISAC Reply 2AD deleted from MRC STDC.
ISAC Reply 2AE deleted from MRC STDC.
ISAC Reply 2AF deleted from MRC STDC.
ISAC Reply 2AH deleted from MRC STDC.
ISAC Reply 2AJ deleted from MRC STDC.
ISAC Reply 2AL deleted from MRC STDC.
ISAC Reply 2AM deleted from MRC STDC.
ISAC Reply 2AN deleted from MRC STDC.
ISAC Reply 3AAT added to MRC THSD.
ISAC Reply 3ACK added to MRC THSD.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AEQ added to MRC THSD.
ISAC Reply 3AVU added to MRC THSD.
ISAC Reply 3ESD added to MRC THSD.
ISAC Reply 3ESE added to MRC THSD.
ISAC Reply 3ESG added to MRC THSD.
ISAC Reply 3ESH added to MRC THSD.
ISAC Reply 3ESI added to MRC THSD.
ISAC Reply 3ESJ added to MRC THSD.
ISAC Reply 3ESK added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 2AA deleted from MRC THSD.
ISAC Reply 2AB deleted from MRC THSD.
ISAC Reply 2AC deleted from MRC THSD.
ISAC Reply 2AD deleted from MRC THSD.
ISAC Reply 2AE deleted from MRC THSD.
ISAC Reply 2AF deleted from MRC THSD.
ISAC Reply 2AG deleted from MRC THSD.
ISAC Reply 2AH deleted from MRC THSD.
ISAC Reply 2AJ deleted from MRC THSD.
ISAC Reply 2AK deleted from MRC THSD.
ISAC Reply 2AL deleted from MRC THSD.
ISAC Reply 2AM deleted from MRC THSD.
ISAC Reply 2AN deleted from MRC THSD.
ISAC Reply 3AAT added to MRC CQJX.
ISAC Reply 3ACK added to MRC CQJX.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AEQ added to MRC CQJX.
ISAC Reply 3AVU added to MRC CQJX.
ISAC Reply 3ESD added to MRC CQJX.
ISAC Reply 3ESE added to MRC CQJX.
ISAC Reply 3ESG added to MRC CQJX.
ISAC Reply 3ESH added to MRC CQJX.
ISAC Reply 3ESI added to MRC CQJX.
ISAC Reply 3ESJ added to MRC CQJX.
ISAC Reply 3ESK added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 2AA deleted from MRC CQJX.
ISAC Reply 2AB deleted from MRC CQJX.
ISAC Reply 2AC deleted from MRC CQJX.
ISAC Reply 2AD deleted from MRC CQJX.
ISAC Reply 2AE deleted from MRC CQJX.
ISAC Reply 2AF deleted from MRC CQJX.
ISAC Reply 2AG deleted from MRC CQJX.
ISAC Reply 2AH deleted from MRC CQJX.
ISAC Reply 2AJ deleted from MRC CQJX.
ISAC Reply 2AK deleted from MRC CQJX.
ISAC Reply 2AL deleted from MRC CQJX.
ISAC Reply 2AM deleted from MRC CQJX.
ISAC Reply 2AN deleted from MRC CQJX.
ISAC Reply 3AAT added to MRC CMLP.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3AEQ added to MRC CMLP.
ISAC Reply 3AVU added to MRC CMLP.
ISAC Reply 3ESD added to MRC CMLP.
ISAC Reply 3ESE added to MRC CMLP.
ISAC Reply 3ESG added to MRC CMLP.
ISAC Reply 3ESH added to MRC CMLP.
ISAC Reply 3ESI added to MRC CMLP.
ISAC Reply 3ESJ added to MRC CMLP.
ISAC Reply 3ESK added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 2AA deleted from MRC CMLP.
ISAC Reply 2AB deleted from MRC CMLP.
ISAC Reply 2AC deleted from MRC CMLP.
ISAC Reply 2AD deleted from MRC CMLP.
ISAC Reply 2AE deleted from MRC CMLP.
ISAC Reply 2AF deleted from MRC CMLP.
ISAC Reply 2AG deleted from MRC CMLP.
ISAC Reply 2AH deleted from MRC CMLP.
ISAC Reply 2AJ deleted from MRC CMLP.
ISAC Reply 2AK deleted from MRC CMLP.
ISAC Reply 2AL deleted from MRC CMLP.
ISAC Reply 2AM deleted from MRC CMLP.
ISAC Reply 2AN deleted from MRC CMLP.
ISAC Reply 3AAT added to MRC CQQR.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AEQ added to MRC CQQR.
ISAC Reply 3ESD added to MRC CQQR.
ISAC Reply 3ESE added to MRC CQQR.
ISAC Reply 3ESG added to MRC CQQR.
ISAC Reply 3ESH added to MRC CQQR.
ISAC Reply 3ESI added to MRC CQQR.
ISAC Reply 3ESJ added to MRC CQQR.
ISAC Reply 3ESK added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 2AA deleted from MRC CQQR.
ISAC Reply 2AB deleted from MRC CQQR.
ISAC Reply 2AC deleted from MRC CQQR.
ISAC Reply 2AD deleted from MRC CQQR.
ISAC Reply 2AE deleted from MRC CQQR.
ISAC Reply 2AF deleted from MRC CQQR.
ISAC Reply 2AG deleted from MRC CQQR.
ISAC Reply 2AH deleted from MRC CQQR.
ISAC Reply 2AJ deleted from MRC CQQR.
ISAC Reply 2AK deleted from MRC CQQR.
ISAC Reply 2AL deleted from MRC CQQR.
ISAC Reply 2AM deleted from MRC CQQR.
ISAC Reply 2AN deleted from MRC CQQR.
ISAC Reply 3AAT added to MRC AAJD.
ISAC Reply 3ACK added to MRC AAJD.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AEQ added to MRC AAJD.
ISAC Reply 3ESD added to MRC AAJD.
ISAC Reply 3ESE added to MRC AAJD.
ISAC Reply 3ESG added to MRC AAJD.
ISAC Reply 3ESH added to MRC AAJD.
ISAC Reply 3ESI added to MRC AAJD.
ISAC Reply 3ESJ added to MRC AAJD.
ISAC Reply 3ESK added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 2AA deleted from MRC AAJD.
ISAC Reply 2AB deleted from MRC AAJD.
ISAC Reply 2AC deleted from MRC AAJD.
ISAC Reply 2AD deleted from MRC AAJD.
ISAC Reply 2AE deleted from MRC AAJD.
ISAC Reply 2AF deleted from MRC AAJD.
ISAC Reply 2AG deleted from MRC AAJD.
ISAC Reply 2AH deleted from MRC AAJD.
ISAC Reply 2AJ deleted from MRC AAJD.
ISAC Reply 2AK deleted from MRC AAJD.
ISAC Reply 2AL deleted from MRC AAJD.
ISAC Reply 2AM deleted from MRC AAJD.
ISAC Reply 2AN deleted from MRC AAJD.
ISAC Reply 3AAT added to MRC CTTC.
ISAC Reply 3AEE added to MRC CTTC.
ISAC Reply 3AEQ added to MRC CTTC.
ISAC Reply 3ESD added to MRC CTTC.
ISAC Reply 3ESG added to MRC CTTC.
ISAC Reply 3ESH added to MRC CTTC.
ISAC Reply 3ESI added to MRC CTTC.
ISAC Reply 3ESJ added to MRC CTTC.
ISAC Reply 3ESK added to MRC CTTC.
ISAC Reply 3HOU added to MRC CTTC.
ISAC Reply 2AA deleted from MRC CTTC.
ISAC Reply 2AB deleted from MRC CTTC.
ISAC Reply 2AC deleted from MRC CTTC.
ISAC Reply 2AD deleted from MRC CTTC.
ISAC Reply 2AE deleted from MRC CTTC.
ISAC Reply 2AF deleted from MRC CTTC.
ISAC Reply 2AG deleted from MRC CTTC.
ISAC Reply 2AH deleted from MRC CTTC.
ISAC Reply 2AJ deleted from MRC CTTC.
ISAC Reply 2AK deleted from MRC CTTC.
ISAC Reply 2AL deleted from MRC CTTC.
ISAC Reply 2AM deleted from MRC CTTC.
ISAC Reply 2AN deleted from MRC CTTC.
ISAC Reply 3AEE added to MRC AAJE.
ISAC Reply 3AEQ added to MRC AAJE.
ISAC Reply 3ESH added to MRC AAJE.
ISAC Reply 3ESI added to MRC AAJE.
ISAC Reply 3ESJ added to MRC AAJE.
ISAC Reply 3HOU added to MRC AAJE.
ISAC Reply 2AA deleted from MRC AAJE.
ISAC Reply 2AB deleted from MRC AAJE.
ISAC Reply 2AC deleted from MRC AAJE.
ISAC Reply 2AD deleted from MRC AAJE.
ISAC Reply 2AE deleted from MRC AAJE.
ISAC Reply 2AF deleted from MRC AAJE.
ISAC Reply 2AG deleted from MRC AAJE.
ISAC Reply 2AH deleted from MRC AAJE.
ISAC Reply 2AJ deleted from MRC AAJE.
ISAC Reply 2AK deleted from MRC AAJE.
ISAC Reply 2AL deleted from MRC AAJE.
ISAC Reply 2AM deleted from MRC AAJE.
ISAC Reply 2AN deleted from MRC AAJE.
ISAC Reply 3AAT added to MRC AAJF.
ISAC Reply 3ACK added to MRC AAJF.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AEQ added to MRC AAJF.
ISAC Reply 3AVU added to MRC AAJF.
ISAC Reply 3ESD added to MRC AAJF.
ISAC Reply 3ESE added to MRC AAJF.
ISAC Reply 3ESG added to MRC AAJF.
ISAC Reply 3ESH added to MRC AAJF.
ISAC Reply 3ESI added to MRC AAJF.
ISAC Reply 3ESJ added to MRC AAJF.
ISAC Reply 3ESK added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 2AA deleted from MRC AAJF.
ISAC Reply 2AB deleted from MRC AAJF.
ISAC Reply 2AC deleted from MRC AAJF.
ISAC Reply 2AD deleted from MRC AAJF.
ISAC Reply 2AE deleted from MRC AAJF.
ISAC Reply 2AF deleted from MRC AAJF.
ISAC Reply 2AG deleted from MRC AAJF.
ISAC Reply 2AH deleted from MRC AAJF.
ISAC Reply 2AJ deleted from MRC AAJF.
ISAC Reply 2AK deleted from MRC AAJF.
ISAC Reply 2AL deleted from MRC AAJF.
ISAC Reply 2AM deleted from MRC AAJF.
ISAC Reply 2AN deleted from MRC AAJF.
ISAC Reply 3AAT added to MRC AASA.
ISAC Reply 3ACK added to MRC AASA.
ISAC Reply 3AEE added to MRC AASA.
ISAC Reply 3AEQ added to MRC AASA.
ISAC Reply 3AVU added to MRC AASA.
ISAC Reply 3ESD added to MRC AASA.
ISAC Reply 3ESE added to MRC AASA.
ISAC Reply 3ESG added to MRC AASA.
ISAC Reply 3ESH added to MRC AASA.
ISAC Reply 3ESI added to MRC AASA.
ISAC Reply 3ESJ added to MRC AASA.
ISAC Reply 3ESK added to MRC AASA.
ISAC Reply 3HOU added to MRC AASA.
ISAC Reply 2AA deleted from MRC AASA.
ISAC Reply 2AB deleted from MRC AASA.
ISAC Reply 2AC deleted from MRC AASA.
ISAC Reply 2AD deleted from MRC AASA.
ISAC Reply 2AE deleted from MRC AASA.
ISAC Reply 2AF deleted from MRC AASA.
ISAC Reply 2AG deleted from MRC AASA.
ISAC Reply 2AH deleted from MRC AASA.
ISAC Reply 2AJ deleted from MRC AASA.
ISAC Reply 2AK deleted from MRC AASA.
ISAC Reply 2AL deleted from MRC AASA.
ISAC Reply 2AM deleted from MRC AASA.
ISAC Reply 2AN deleted from MRC AASA.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED03796*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AATDST8640*;MATT3AATDST8640$DAL0059*;MATT3AATDST8640$$DAL0059*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESF | LATCH RING |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2018 | ALUMINUM ALLOY 2018 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2025 | ALUMINUM ALLOY 2025 |
| AL0034 | ALUMINUM ALLOY 208.0 |
| AL0213 | ALUMINUM ALLOY 213.0 |
| AL2218 | ALUMINUM ALLOY 2218 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL0038 | ALUMINUM ALLOY 222.0 |
| AL0039 | ALUMINUM ALLOY 242.0 |
| AL2618 | ALUMINUM ALLOY 2618 |
| AL0025 | ALUMINUM ALLOY 295.0 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0035 | ALUMINUM ALLOY 319.0 |
| AL0036 | ALUMINUM ALLOY 328.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL4032 | ALUMINUM ALLOY 4032 |
| AL4043 | ALUMINUM ALLOY 4043 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5056 | ALUMINUM ALLOY 5056 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0026 | ALUMINUM ALLOY 514.0 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL0043 | ALUMINUM ALLOY 520.0 |
| AL0059 | ALUMINUM ALLOY 535.0 |
| AL5454 | ALUMINUM ALLOY 5454 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6053 | ALUMINUM ALLOY 6053 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL6066 | ALUMINUM ALLOY 6066 |
| AL6151 | ALUMINUM ALLOY 6151 |
| AL6262 | ALUMINUM ALLOY 6262 |
| AL0047 | ALUMINUM ALLOY 705.0 |
| AL7050 | ALUMINUM ALLOY 7050 |
| AL0048 | ALUMINUM ALLOY 707.0 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7076 | ALUMINUM ALLOY 7076 |
| AL0049 | ALUMINUM ALLOY 713.0 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL0771 | ALUMINUM ALLOY 771.0 |
| AL0850 | ALUMINUM ALLOY 850.0 |
| AL0002 | ALUMINUM ALLOY A356.0 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| AL0042 | ALUMINUM ALLOY A712.0 |
| AL0061 | ALUMINUM ALLOY A850.0 |
| AL0033 | ALUMINUM ALLOY B443.0 |
| AL0041 | ALUMINUM ALLOY B514.0 |
| AL0062 | ALUMINUM ALLOY B850.0 |
| AL0060 | ALUMINUM ALLOY C355.0 |
| AL0008 | ALUMINUM ALLOY C443.0 |
| AL0024 | ALUMINUM ALLOY D712.0 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0249 | COPPER ALLOY 102 |
| CU0286 | COPPER ALLOY 104 |
| CU0287 | COPPER ALLOY 105 |
| CU0288 | COPPER ALLOY 107 |
| CU0063 | COPPER ALLOY 110 |
| CU0289 | COPPER ALLOY 113 |
| CU0290 | COPPER ALLOY 114 |
| CU0291 | COPPER ALLOY 116 |
| CU0247 | COPPER ALLOY 120 |
| CU0323 | COPPER ALLOY 121 |
| CU0248 | COPPER ALLOY 122 |
| CU0292 | COPPER ALLOY 123 |
| CU0278 | COPPER ALLOY 125 |
| CU0324 | COPPER ALLOY 127 |
| CU0326 | COPPER ALLOY 128 |
| CU0315 | COPPER ALLOY 130 |
| CU0279 | COPPER ALLOY 142 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0235 | COPPER ALLOY 425 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0509 | COPPER ALLOY 509 |
| CU0103 | COPPER ALLOY 510 |
| CU0105 | COPPER ALLOY 521 |
| CU0109 | COPPER ALLOY 544 |
| CU0111 | COPPER ALLOY 606 |
| CU0115 | COPPER ALLOY 614 |
| CU0122 | COPPER ALLOY 630 |
| CU0127 | COPPER ALLOY 642 |
| CU0670 | COPPER ALLOY 670 |
| CU0675 | COPPER ALLOY 675 |
| CU0715 | COPPER ALLOY 715 |
| CU0172 | COPPER ALLOY 836 |
| CU0174 | COPPER ALLOY 842 |
| CU0175 | COPPER ALLOY 844 |
| CU0177 | COPPER ALLOY 852 |
| CU0178 | COPPER ALLOY 854 |
| CU0180 | COPPER ALLOY 857 |
| CU0181 | COPPER ALLOY 861 |
| CU0182 | COPPER ALLOY 862 |
| CU0183 | COPPER ALLOY 863 |
| CU0184 | COPPER ALLOY 864 |
| CU0185 | COPPER ALLOY 865 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0198 | COPPER ALLOY 910 |
| CU0199 | COPPER ALLOY 913 |
| CU0202 | COPPER ALLOY 922 |
| CU0203 | COPPER ALLOY 923 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0209 | COPPER ALLOY 937 |
| CU0212 | COPPER ALLOY 940 |
| CU0217 | COPPER ALLOY 952 |
| CU0218 | COPPER ALLOY 953 |
| CU0219 | COPPER ALLOY 954 |
| CU0220 | COPPER ALLOY 955 |
| CU1181 | COPPER ALLOY UNS C63200 |
| CCA000 | COTTON |
| FEA000 | IRON |
| FE0019 | IRON ALLOY 660 |
| FEB000 | IRON CAST |
| FE0044 | IRON CAST UNS F11401 |
| FE0062 | IRON CAST UNS F11501 |
| FE0045 | IRON CAST UNS F11701 |
| FE0046 | IRON CAST UNS F12101 |
| FE0063 | IRON CAST UNS F12102 |
| FE0052 | IRON CAST UNS F12401 |
| FE0047 | IRON CAST UNS F12801 |
| FE0064 | IRON CAST UNS F12802 |
| FE0048 | IRON CAST UNS F13101 |
| FE0049 | IRON CAST UNS F13501 |
| FE0050 | IRON CAST UNS F13801 |
| FE0051 | IRON CAST UNS F14101 |
| FE0038 | IRON CAST UNS F22200 |
| FE0039 | IRON CAST UNS F22400 |
| FE0053 | IRON CAST UNS F22830 |
| FE0061 | IRON CAST UNS F32800 |
| FE0065 | IRON CAST UNS F33100 |
| FE0066 | IRON CAST UNS F33800 |
| FE0067 | IRON CAST UNS F34800 |
| FE0068 | IRON CAST UNS F36200 |
| FEC000 | IRON MALLEABLE |
| FEG000 | IRON WROUGHT |
| MGA000 | MAGNESIUM |
| MG0013 | MAGNESIUM ALLOY AZ10A |
| MG0001 | MAGNESIUM ALLOY AZ31B |
| MG0002 | MAGNESIUM ALLOY AZ61A |
| MG0003 | MAGNESIUM ALLOY AZ80A |
| MG0008 | MAGNESIUM ALLOY AZ91C |
| MG0005 | MAGNESIUM ALLOY M1A |
| MG0006 | MAGNESIUM ALLOY ZK60A |
| NLB000 | NICKEL ALLOY |
| NL0043 | NICKEL ALLOY 205 |
| NL0008 | NICKEL ALLOY 400 |
| NL0019 | NICKEL ALLOY 502 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| PCA000 | PLASTIC |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCBC00 | PLASTIC STYRENE |
| STA000 | STEEL |
| ST1005 | STEEL COMP 1005 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1034 | STEEL COMP 1034 |
| ST1035 | STEEL COMP 1035 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST1039 | STEEL COMP 1039 |
| ST1040 | STEEL COMP 1040 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1044 | STEEL COMP 1044 |
| ST1045 | STEEL COMP 1045 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1053 | STEEL COMP 1053 |
| ST1055 | STEEL COMP 1055 |
| ST0530 | STEEL COMP 105-85 |
| ST1060 | STEEL COMP 1060 |
| ST1070 | STEEL COMP 1070 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1108 | STEEL COMP 1108 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1120 | STEEL COMP 1120 |
| ST1125 | STEEL COMP 1125 |
| ST1126 | STEEL COMP 1126 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1138 | STEEL COMP 1138 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1144 | STEEL COMP 1144 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST0520 | STEEL COMP 120-95 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0063 | STEEL COMP 12L14 |
| ST1320 | STEEL COMP 1320 |
| ST1330 | STEEL COMP 1330 |
| ST0065 | STEEL COMP 1330H |
| ST1335 | STEEL COMP 1335 |
| ST0066 | STEEL COMP 1335H |
| ST1340 | STEEL COMP 1340 |
| ST0067 | STEEL COMP 1340H |
| ST1345 | STEEL COMP 1345 |
| ST0531 | STEEL COMP 150-125 |
| ST1524 | STEEL COMP 1524 |
| ST1527 | STEEL COMP 1527 |
| ST1536 | STEEL COMP 1536 |
| ST1541 | STEEL COMP 1541 |
| ST1548 | STEEL COMP 1548 |
| ST1551 | STEEL COMP 1551 |
| ST1552 | STEEL COMP 1552 |
| ST1561 | STEEL COMP 1561 |
| ST0572 | STEEL COMP 175-145 |
| ST0202 | STEEL COMP 202 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0305 | STEEL COMP 305 |
| ST0309 | STEEL COMP 309 |
| ST0310 | STEEL COMP 310 |
| ST3115 | STEEL COMP 3115 |
| ST3130 | STEEL COMP 3130 |
| ST3135 | STEEL COMP 3135 |
| ST3140 | STEEL COMP 3140 |
| ST0081 | STEEL COMP 3140H |
| ST0316 | STEEL COMP 316 |
| ST0082 | STEEL COMP 316L |
| ST0317 | STEEL COMP 317 |
| ST0321 | STEEL COMP 321 |
| ST0322 | STEEL COMP 322 |
| ST0324 | STEEL COMP 324 |
| ST0083 | STEEL COMP 3310H |
| ST0347 | STEEL COMP 347 |
| ST4023 | STEEL COMP 4023 |
| ST0403 | STEEL COMP 403 |
| ST4032 | STEEL COMP 4032 |
| ST4037 | STEEL COMP 4037 |
| ST0085 | STEEL COMP 4037H |
| ST4042 | STEEL COMP 4042 |
| ST0086 | STEEL COMP 4042H |
| ST4047 | STEEL COMP 4047 |
| ST0087 | STEEL COMP 4047H |
| ST0405 | STEEL COMP 405 |
| ST4063 | STEEL COMP 4063 |
| ST0089 | STEEL COMP 4063H |
| ST0410 | STEEL COMP 410 |
| ST4130 | STEEL COMP 4130 |
| ST0090 | STEEL COMP 4130H |
| ST4135 | STEEL COMP 4135 |
| ST0091 | STEEL COMP 4135H |
| ST4137 | STEEL COMP 4137 |
| ST0092 | STEEL COMP 4137H |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0093 | STEEL COMP 4140H |
| ST4142 | STEEL COMP 4142 |
| ST0094 | STEEL COMP 4142H |
| ST4145 | STEEL COMP 4145 |
| ST0095 | STEEL COMP 4145H |
| ST4147 | STEEL COMP 4147 |
| ST0096 | STEEL COMP 4147H |
| ST4150 | STEEL COMP 4150 |
| ST0097 | STEEL COMP 4150H |
| ST0416 | STEEL COMP 416 |
| ST0099 | STEEL COMP 416SE |
| ST0420 | STEEL COMP 420 |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST4320 | STEEL COMP 4320 |
| ST4330 | STEEL COMP 4330 |
| ST4337 | STEEL COMP 4337 |
| ST4340 | STEEL COMP 4340 |
| ST0104 | STEEL COMP 4340H |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST0285 | STEEL COMP 440FSE |
| ST0446 | STEEL COMP 446 |
| ST4615 | STEEL COMP 4615 |
| ST4620 | STEEL COMP 4620 |
| ST0109 | STEEL COMP 4620H |
| ST4621 | STEEL COMP 4621 |
| ST0110 | STEEL COMP 4621H |
| ST4640 | STEEL COMP 4640 |
| ST4812 | STEEL COMP 4812 |
| ST4815 | STEEL COMP 4815 |
| ST0111 | STEEL COMP 4815H |
| ST4820 | STEEL COMP 4820 |
| ST0112 | STEEL COMP 4820H |
| ST5015 | STEEL COMP 5015 |
| ST5117 | STEEL COMP 5117 |
| ST5120 | STEEL COMP 5120 |
| ST0117 | STEEL COMP 5120H |
| ST5130 | STEEL COMP 5130 |
| ST0118 | STEEL COMP 5130H |
| ST5132 | STEEL COMP 5132 |
| ST0119 | STEEL COMP 5132H |
| ST5135 | STEEL COMP 5135 |
| ST0120 | STEEL COMP 5135H |
| ST5140 | STEEL COMP 5140 |
| ST0121 | STEEL COMP 5140H |
| ST5145 | STEEL COMP 5145 |
| ST0122 | STEEL COMP 5145H |
| ST5147 | STEEL COMP 5147 |
| ST0123 | STEEL COMP 5147H |
| ST5150 | STEEL COMP 5150 |
| ST5160 | STEEL COMP 5160 |
| ST0124 | STEEL COMP 5160H |
| ST6145 | STEEL COMP 6145 |
| ST0615 | STEEL COMP 615 |
| ST6150 | STEEL COMP 6150 |
| ST0129 | STEEL COMP 6150H |
| ST0630 | STEEL COMP 630 |
| ST0633 | STEEL COMP 633 |
| ST0634 | STEEL COMP 634 |
| ST0134 | STEEL COMP 80-50 |
| ST8115 | STEEL COMP 8115 |
| ST8615 | STEEL COMP 8615 |
| ST8617 | STEEL COMP 8617 |
| ST0136 | STEEL COMP 8617H |
| ST8620 | STEEL COMP 8620 |
| ST0137 | STEEL COMP 8620H |
| ST8622 | STEEL COMP 8622 |
| ST0138 | STEEL COMP 8622H |
| ST8630 | STEEL COMP 8630 |
| ST0139 | STEEL COMP 8630H |
| ST8635 | STEEL COMP 8635 |
| ST8637 | STEEL COMP 8637 |
| ST0181 | STEEL COMP 8637H |
| ST8640 | STEEL COMP 8640 |
| ST0140 | STEEL COMP 8640H |
| ST8642 | STEEL COMP 8642 |
| ST0141 | STEEL COMP 8642H |
| ST8645 | STEEL COMP 8645 |
| ST0142 | STEEL COMP 8645H |
| ST8650 | STEEL COMP 8650 |
| ST0143 | STEEL COMP 8650H |
| ST8655 | STEEL COMP 8655 |
| ST8660 | STEEL COMP 8660 |
| ST0145 | STEEL COMP 8660H |
| ST8720 | STEEL COMP 8720 |
| ST0146 | STEEL COMP 8720H |
| ST8735 | STEEL COMP 8735 |
| ST8740 | STEEL COMP 8740 |
| ST0147 | STEEL COMP 8740H |
| ST8742 | STEEL COMP 8742 |
| ST0148 | STEEL COMP 8742H |
| ST8750 | STEEL COMP 8750 |
| ST0184 | STEEL COMP 90-60 |
| ST9260 | STEEL COMP 9260 |
| ST0149 | STEEL COMP 9310H |
| ST9840 | STEEL COMP 9840 |
| ST9850 | STEEL COMP 9850 |
| ST0736 | STEEL COMP A42 |
| ST0026 | STEEL COMP E3310 |
| ST1093 | STEEL COMP E3316 |
| ST0027 | STEEL COMP E4337H |
| ST0028 | STEEL COMP E4340 |
| ST0029 | STEEL COMP E4340H |
| ST0030 | STEEL COMP E52100 |
| ST0031 | STEEL COMP E9310 |
| ST0046 | STEEL COMP MT1010 |
| ST0047 | STEEL COMP MT1015 |
| ST0048 | STEEL COMP MT1020 |
| ST0049 | STEEL COMP MTX1015 |
| ST0050 | STEEL COMP MTX1020 |
| ST0704 | STEEL COMP XM-12 |
| ST0187 | STEEL COMP XM-13 |
| STB000 | STEEL CORROSION RESISTING |
| ST0586 | STEEL UNS J03001 |
| ST1593 | STEEL UNS J03007 |
| ST0594 | STEEL UNS J03008 |
| ST0587 | STEEL UNS J03501 |
| ST0603 | STEEL UNS J03504 |
| ST0575 | STEEL UNS J04501 |
| ST0691 | STEEL UNS J11875 |
| ST1469 | STEEL UNS J13042 |
| ST0690 | STEEL UNS J21880 |
| ST0626 | STEEL UNS J91152 |
| ST1836 | STEEL UNS J92200 |
| ST0599 | STEEL UNS J92811 |
| ST0552 | STEEL UNS K02600 |
| ST1815 | STEEL UNS K02603 |
| ST0562 | STEEL UNS K02700 |
| ST1788 | STEEL UNS K11805 |
| ST0694 | STEEL UNS K15747 |
| ST0693 | STEEL UNS K17145 |
| ST0566 | STEEL UNS K21590 |
| ST0551 | STEEL UNS K23080 |
| ST0532 | STEEL UNS K24065 |
| ST0533 | STEEL UNS K32550 |
| ST0628 | STEEL UNS S34720 |
| ST0629 | STEEL UNS S34723 |
| TTA000 | TITANIUM ALLOY |
| TT0052 | TITANIUM ALLOY UNS R56400 |
| TT0053 | TITANIUM ALLOY UNS R56401 |
| TT0054 | TITANIUM ALLOY UNS R56440 |
| TT0055 | TITANIUM ALLOY UNS R56620 |
| TT0039 | TITANIUM UNS R50250 |
| TT0041 | TITANIUM UNS R50550 |
| TT0042 | TITANIUM UNS R50700 |
| ZN0015 | ZINC ALLOY UNS Z33520 |
| ZN0018 | ZINC ALLOY UNS Z35531 |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESF | LATCH RING |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and AJSD and AKYX and ABPZ and AAZE and AKYV)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and AJSD and AKYX and ABPZ and AKYV and AAZE)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AJSD and ABMK and AKYX and ABPZ and AKYY and AAZE and AATR and AKYV)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYX and ABMK and AJSD and AKZB and AKYV and AAZE)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYX and ABMK and AJSD and AKYY and AKZB and AAZE and AATR and AKYV)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYX and AKYW and AKZA and AJSD and ABMK and AKYV and ABPZ)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYX and AKYV and AJSD and ABMK and ABKW and ASDB)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYV and AKYX and AKYW and AJSD and ABMK and ABKW and ABPZ)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATR and AKYX and AAZE and AKYV and AJSD and ABMK and ABKW and AKZB)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATR and AAZE and AKYY and AKYZ and AKYX and AKYV and AJSD and ABMK and ABKW and AKZB)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYY and AAZE and AATR and AKYX and AKYZ and AKYV and AJSD and ABMK and ABKW and ABPZ)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYY and AAZE and AATR and AKYX and AKYV and AJSD and ABMK and ABPZ)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYX and AKYV and AJSD and ABMK and ABKW)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYZ and AKYY and AAZE and AATR and AKYV and AKYX and AJSD and ABMK and ABPZ)
IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AKYV and AKYW and AJSD and ABPZ and AKYX)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and AKYV and AJSD and ABPZ and AKYX)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and AKYV and AKYX and AJSD)
IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATR and ABMK and ABKW and AKYV and AJSD and ABPZ and AKYX)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and AKYV and AJSD and CRMK and AKYX and ADWJ)
IF STYLE/REPLY CODE(s) 20 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATR and AAZE and AKYV and ABKW and ABMK and AJSD and CRMK and AKYX and ADWJ)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and ABMK and ABKW and AKYV and AKYX and ABPZ and AKYW and AJSD)
IF STYLE/REPLY CODE(s) 22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and AKYV and AKYX and AJSD and ABPZ and AKYW)
IF STYLE/REPLY CODE(s) 23 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABPZ and AKYW and AJSD and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 24 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYX and ABMK and AJSD and ABPZ and ABKW and AKYV and AATR and ASDB)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATR and AAZE and AKYW and ABMK and AJSD and ABPZ and AKYX and AKYV and ABKW)
IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AATR and AAZE and ADAV and AKYW and AJSD and ABPZ and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 27 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and ABMK and ABKW and ABPZ and AKYW and AJSD and AKYX and AKYV and AATR)
IF STYLE/REPLY CODE(s) 28 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AKYX and AJSD and ABMK and ABKW and ABPZ and AKYV and AATR)
IF STYLE/REPLY CODE(s) 29 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AKYX and AKYW and AJSD and ABPZ and AKYV)
IF STYLE/REPLY CODE(s) 30 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYV and AJSD and ABMK and ABKW and ABPZ)
IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AKYW and AJSD and ABPZ and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 32 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABMK and AKYW and AJSD and ABPZ and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 33 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and AJSD and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 34 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYW and ADAV and AJSD and ABMK and ABPZ and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AJSD and ABMK and ABKW and ABPZ and AKYX and AKYV)
IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYX and ABMK and AJSD and ABPZ and AKYV)
IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AKYX and AJSD and ABMK and ABKW and ABPZ and AKZC and AKZD and AKYV)
IF STYLE/REPLY CODE(s) 38 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AKYX and AKYV and AKYW and AJSD and ABMK and ABPZ and ASDB)
IF STYLE/REPLY CODE(s) 39 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AKYW and AJSD and AKYX and ABPZ and AATR and AKYZ and AKYV)
IF STYLE/REPLY CODE(s) 40 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AATR and AKYV and AKYX and ABPZ and AKYW and AJSD)
IF STYLE/REPLY CODE(s) 41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AKYX and AKYW and AJSD and AKYV and AKZB)
IF STYLE/REPLY CODE(s) 42 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAZE and AKYY and AKYZ and ADAV and AKYW and AJSD and ABMK and ABPZ and AKYX and AKYV and AATR)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL8)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AM10001 | 1 | CLEVIS |
| AM10010 | 10 | CLEVIS |
| AM10011 | 11 | CLEVIS |
| AM10012 | 12 | CLEVIS |
| AM10013 | 13 | CLEVIS |
| AM10014 | 14 | CLEVIS |
| AM10015 | 15 | CLEVIS |
| AM10016 | 16 | CLEVIS |
| AM10017 | 17 | CLEVIS |
| AM10018 | 18 | CLEVIS |
| AM10019 | 19 | CLEVIS |
| AM10002 | 2 | CLEVIS |
| AM10020 | 20 | CLEVIS |
| AM10021 | 21 | CLEVIS |
| AM10022 | 22 | CLEVIS |
| AM10023 | 23 | CLEVIS |
| AM10024 | 24 | CLEVIS |
| AM10025 | 25 | CLEVIS |
| AM10026 | 26 | CLEVIS |
| AM10027 | 27 | CLEVIS |
| AM10028 | 28 | CLEVIS |
| AM10029 | 29 | CLEVIS |
| AM10003 | 3 | CLEVIS |
| AM10030 | 30 | CLEVIS |
| AM10031 | 31 | CLEVIS |
| AM10032 | 32 | CLEVIS |
| AM10033 | 33 | CLEVIS |
| AM10034 | 34 | CLEVIS |
| AM10036 | 35 | CLEVIS |
| AM10037 | 36 | CLEVIS |
| AM10038 | 37 | CLEVIS |
| AM10039 | 38 | CLEVIS |
| AM10040 | 39 | CLEVIS |
| AM10004 | 4 | CLEVIS |
| AM10041 | 40 | CLEVIS |
| AM10042 | 41 | CLEVIS |
| AM10043 | 42 | CLEVIS |
| AM10005 | 5 | CLEVIS |
| AM10006 | 6 | CLEVIS |
| AM10007 | 7 | CLEVIS |
| AM10008 | 8 | CLEVIS |
| AM10009 | 9 | CLEVIS |
AATR*JSHANK LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SHANK,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AATRJAA2.0*;AATRJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAZE*JSHANK DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY OF THE SHANK AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAZEJAB2.0*;AAZEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPZ*JEND RADIUS
A MEASUREMENT OF A STRAIGHT LINE EXTENDING FROM THE CENTER OF A CIRCLE TO THE END.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPZJAC2.0*;ABPZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADWJ*JANGLE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADWJJAB2.0*;ADWJJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJSD*JFORK SPAN WIDTH
THE DISTANCE LATERALLY FROM TIP TO TIP OF THE FORK.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJSDJAA2.0*;AJSDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYV*JDISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYVJAB2.0*;AKYVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYW*JFORK ARM THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYWJAA2.0*;AKYWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYX*JFORK DEPTH
THE MEASUREMENT BETWEEN SPECIFIED POINTS OF THE FORK,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYXJAC2.0*;AKYXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYY*JSHANK SHOULDER DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SHANK SHOULDER,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYYJAA2.0*;AKYYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYZ*JSHANK SHOULDER LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A SHANK SHOULDER,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYZJAA2.0*;AKYZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKZA*JDISTANCE FROM FORK CENTERLINE TO ROD CONNECTION HOLE CENTERLINE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKZAJAB2.0*;AKZAJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKZB*JDISTANCE FROM PIVOT PINHOLE CENTER TO FORK END
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKZBJAA2.0*;AKZBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKZC*JCENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKZCJAB2.0*;AKZCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKZD*JCENTER TO CENTER DISTANCE BETWEEN SECOND AND THIRD HOLES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKZDJAB2.0*;AKZDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRMK*JANGLE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRMKJDA2.0*;CRMKJDA2.0$$JDA2.1*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) APL WERE ENTERED FOR MRC BCLP, YOU MUST ANSWER MRC (AAUB)
IF STYLE/REPLY CODE(s) ARY WERE ENTERED FOR MRC BCLP, YOU MUST ANSWER MRC (ABGC and ABGD)
BCLPDHOLE SHAPE
THE PHYSICAL CONFIGURATION OF THE HOLE.
Enter the applicable reply code from the table below
(BCLPDARY)
| Table 1 |
| Reply Code (AD07) | Reply |
| APL | ROUND |
| ARY | SLOTTED |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAC2.0*;AAUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAB2.0*;ABGCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGD*JSLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGDJAA2.0*;ABGDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDCMB000*;SFTT3AEEDCMB000$DZNA000*;SFTT3AEEDCMB000$$DZNA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESI | ROD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| ENB000 | ENAMEL LUSTERLESS |
| ENF000 | ENAMEL SEMIGLOSS |
| AUA000 | GOLD |
| LQA000 | LACQUER |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXE000 | OXIDE COPPER |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHC000 | PHOSPHATE MANGANESE |
| PHD000 | PHOSPHATE ZINC |
| PRA000 | PRIMER |
| RHA000 | RHODIUM |
| RCA000 | RUBBER |
| AGA000 | SILVER |
| SNA000 | TIN |
| SNB000 | TIN ALLOY |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
| AAAAAB | ZINC NICKEL |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESI | ROD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) AM, JC, JE, JF, NC, NE OR NF WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF and AASA)
IF STYLE/REPLY CODE(s) SJ, SK, SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF and AASA and CQQR) or (CQJX and AAJF and AASA and CTTC) or (CQJX and AAJF and AASA and AAJE)
IF STYLE/REPLY CODE(s) EM OR MJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR and CTTC and AAJF and AASA)
IF STYLE/REPLY CODE(s) NP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD and AAJF and AASA)
IF STYLE/REPLY CODE(s) JS OR NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJF and AASA and AAJD) or (CQJX and CMLP and AAJF and AASA and AAJE)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJF and AASA and CMLP) or (CQJX and AAJF and AASA and CQQR)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AEQDNE*;THSD3AEQDNE$DNP*;THSD3AEQDNE$$DNP*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| BF | BSF |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NP | NPT |
| SJ | SI |
| SK | SI-M |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AATJA2.0*;CQJX3AATJA2.0$JA2.0*;CQJX3AATJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AVUAQ4)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3ESGB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3ESEAM7)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CTTC3ESGJNTE2.0*;CTTC3ESGJNTE2.0$JNTE2.0*;CTTC3ESGJNTE2.0$$JNTE2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3ESD | ATTACHMENT |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJE3ESJJAM32.0/P50.0*;AAJE3ESJJAM32.0/P50.0$$JA*;AAJE3ESJJAM32.0/P50.0$JAM32.0/P50.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3ESKDAAG*;AAJF3ESKDAAG$DAAL*;AAJF3ESKDAAG$$DAAL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASA3AEQJAA2.0*;AASA3AEQJAA2.0$JAA2.0*;AASA3AEQJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3AEE | OVERALL |
| 3AEQ | SHANK |
| 3AVU | SLEEVE |
| 3ESD | ATTACHMENT |
| 3ESE | END PULL |
| 3ESG | PIVOT PIN HOLE |
| 3ESH | ROD CONNECTION |
| 3ESI | ROD END |
| 3ESJ | SECURING PIN HOLE |
| 3ESK | STUD END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AETC*JMETALLIC HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF A METALLIC ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AETCJASC2.0*;AETCJASC2.0$$JASC2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AC26) | Reply |
| BS | BRINELL STANDARD |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RS | ROCKWELL SUPERFICIAL 15-N |
| SC | SHORE SCLEROSCOPE |
AKYH*JDISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END
THE DISTANCE ALONG A STRAIGHT LINE FROM THE ROD CONNECTING END AT RIGHT ANGLE TO THE GEOMETRIC AXIS OF THE SECURING PIN HOLE CENTER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYHJAA2.0*;AKYHJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYC*JROD CONNECTION BORE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A ROD CONNECTION BORE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYCJAA2.0*;AKYCJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYE*JSECURING PIN HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A SECURING PIN HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYEJAA2.0*;AKYEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYG*JROD CONNECTION BORE DEPTH
THE DISTANCE MEASURED ALONG A STRAIGHT LINE PARALLEL TO THE LONGITUDINAL AXIS WHICH ESTABLISHES THE ACCEPTABLE DEPTH OF THE ROD CONNECTION BORE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKYGJAB2.0*;AKYGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDRHA000$DAUA000*;PRMTDRHA000$$DAUA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000E2.0*;PMWTJRTA000E2.0$$JRTA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRHA0002.0*;PMLCJRHA0002.0$JRHA0002.0*;PMLCJRHA0002.0$$JRHA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAM*;BBRGDAE$DAC*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AJ | UNHEATED WAREHOUSE |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCY2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
| CB | CUBIC MILLIMETERS |
| CY | CUBIC YARDS |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJAC2.0*;ASDBJAC2.0$JAC2.0*;ASDBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information