An item which senses, measures, and records the temperature and moisture content of the surrounding atmosphere.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED01085*)
AFGAJOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
APQBDUNIT TYPE
INDICATES THE TYPE OF UNIT.
Enter the applicable reply code from the table below
(APQBDCCA)
| Table 1 |
| Reply Code (AK95) | Reply |
| CBZ | ABSORPTION WEDGE |
| ANQ | BAYONET |
| BXJ | BIMETALLIC |
| ANR | BUTTON |
| CCA | CALIBRATED ELECTRIC LAMP |
| CBY | CHEMICAL |
| CMP | DIAL INDICATING |
| CCB | DISAPPEARING FILAMENT |
| ANS | EXPOSED LOOP |
| ANE | FLUSH |
| ANT | GASKET |
| BXK | MERCURY |
| ANF | PROTECTIVE TUBE |
| ANW | RIVET |
| ANX | SHIELDED |
BHMCDCASE TYPE
INDICATES THE TYPE OF CASE PROVIDED.
Enter the applicable reply code from the table below
(BHMCDAEZ*;BHMCDAAH$$DAGE*)
| Table 1 |
| Reply Code (AJ95) | Reply |
| AEN | BOX W/HANDLE |
| AFD | CARRYING CASE W/HANDLE |
| ABG | CORROSION RESISTANT |
| AGD | CYLINDRICAL |
| AAD | DRIPPROOF |
| ABJ | DUST TIGHT |
| AAE | DUSTPROOF |
| AEP | DUSTPROOF W/LEATHER CARRYING STRAP |
| AAH | EXPLOSION PROOF |
| AFE | EXPLOSION PROOF W/CARRYING CASE |
| AER | FUMEPROOF |
| AES | FUMEPROOF W/HINGED DOOR |
| AET | FUNGUSPROOF W/HINGED LID |
| AAK | HERMETICALLY SEALED |
| AEW | HINGED LID CARRYING CASE W/HANDLE |
| ABT | MOISTURE PROOF |
| AEX | MOISTURE PROOF W/HINGED DOOR |
| AGE | OBLONG |
| AGF | RECTANGULAR |
| AGG | ROUND |
| ACH | SHOCK PROOF |
| ACG | SHOCK RESISTANT |
| AEY | SHOCKPROOF CASE W/HANDLE |
| AEZ | SPARKPROOF |
| AFA | SPARKPROOF W/TELESCOPE HOLDER |
| ACJ | SPLASH PROOF |
| AFB | SPLASH PROOF W/HANDLE |
| AFC | VAPORPROOF |
| ACR | VIBRATION PROOF |
| AAY | WATERPROOF |
BHMWJMEASUREMENT RANGE
THE MINIMUM TO MAXIMUM VALUE WHICH THE ITEM IS CAPABLE OF MEASURING.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(BHMWJBMM32.0/P50.0*;BHMWJBMM32.0/P50.0$$JBM*)
| Table 1 |
| Reply Code (AJ20) | Reply |
| BM | DEG CELSIUS |
| BN | DEG FAHRENHEIT |
| MD | PERCENT RELATIVE HUMIDITY |
BBTQDSENSING ELEMENT TYPE
INDICATES THE TYPE OF SENSING ELEMENT PROVIDED.
Enter the applicable reply code from the table below
(BBTQDABH*;BBTQDABT$$DACT*)
| Table 1 |
| Reply Code (AJ77) | Reply |
| ABF | ANEROID |
| ABG | ANEROID BELLOWS |
| ABH | BIMETALLIC TEMP |
| ABJ | BOURDON TUBE |
| ABK | BOURDON TUBE TEMP |
| ABL | BULB TYPE THERMAL |
| ABM | HAIR TYPE HUMIDITY |
| ABT | LIQUID FILLED HELICAL |
| ABP | MERCURY VAPOR BULB |
| ABQ | MULTIPLE HAIR UNIT |
| ABR | POLYSTYRENE COIL FORM |
| ABX | SYLPHON TYPE ANEROID CELLS |
| ACT | THIN FILM CAPACITOR |
BFHZDMEASUREMENT TYPE
INDICATES THE TYPE OF MEASUREMENT PROVIDED.
Enter the applicable reply code from the table below
(BFHZDEY)
| Table 1 |
| Reply Code (AJ52) | Reply |
| CA | BRIDGE CIRCUIT |
| CY | DIGITAL |
| EY | ELECTROLYTIC |
| CB | ELECTRONIC CIRCUIT |
| CD | MILLIVOLT CIRCUIT |
| CC | MOVING COIL RATIOMETER |
| CE | POTENTIOMETER CIRCUIT |
| EZ | SENSITIZED ACTUATING ELEMENT |
| CF | THERMOELECTRICAL CIRCUIT |
| CG | WHEATSTONE BRIDGE CIRCUIT |
CSYJJPOINTER/PEN TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF POINTER(S) OR PEN(S).
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(CSYJJAANAAT2*;CSYJJAANAAT2$$JAANAAT3*)
| Table 1 |
| Reply Code (AL97) | Reply |
| AAL | INDICATING |
| AAN | RECORDING |
| AAM | REFERENCE |
| Table 2 |
| Reply Code (AJ44) | Reply |
| AAW | MULTIPLE |
| AAT | SINGLE |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3DETDPCJ000*;MATT3DETDPCJ000$DNLB000*;MATT3DETDPCJ000$$DNLB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DES | METER CASE |
| 3DET | BULB |
| 3DEX | OUTER JACKET INSULATION/SHEATHING |
| 3DFB | CASE HOLDER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL0308 | ALUMINUM ALLOY 308.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL0129 | ALUMINUM ALLOY B380.0 |
| ASA000 | ASBESTOS |
| BRA000 | BRASS |
| CSA000 | CELLULOSE |
| CXA000 | CEMENT |
| CLD000 | CERAMIC |
| CLF000 | CERAMIC ALUMINA (USE ALUMINUM OXIDE) |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0080 | COPPER ALLOY 268 |
| CU0088 | COPPER ALLOY 342 |
| CU0089 | COPPER ALLOY 353 |
| CU0099 | COPPER ALLOY 464 |
| CU0715 | COPPER ALLOY 715 |
| CUF000 | COPPER CAST |
| CKA000 | CORK |
| CCA000 | COTTON |
| FG0000 | FIBERGLASS |
| GSA000 | GLASS |
| GSN000 | GLASS LAMINATE |
| GSJ000 | GLASS OPTICAL |
| HRE000 | HAIR |
| FEA000 | IRON |
| FED000 | IRON CAST ALLOY |
| FEC000 | IRON MALLEABLE |
| LRA000 | LEATHER |
| LRE000 | LEATHER ARTIFICIAL |
| MGB000 | MAGNESIUM ALLOY |
| AYA000 | MICA |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NL0009 | NICKEL ALLOY 600 |
| NL0059 | NICKEL ALLOY 800 |
| NL0018 | NICKEL ALLOY K-500 |
| NL0017 | NICKEL ALLOY R-405 |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCJ000 | PLASTIC MELAMINE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAAA0 | PLASTIC VINYL ACETATE |
| PTA000 | PLATINUM |
| CLB000 | PORCELAIN |
| RHA000 | RHODIUM |
| RCA000 | RUBBER NATURAL |
| RC0001 | RUBBER POLYACRYLATE CLASS ACM |
| RC0003 | RUBBER POLYESTER URETHANE CLASS AU |
| RCL000 | RUBBER POLYETHYLENE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST1005 | STEEL COMP 1005 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1022 | STEEL COMP 1022 |
| ST1024 | STEEL COMP 1024 |
| ST1045 | STEEL COMP 1045 |
| ST1050 | STEEL COMP 1050 |
| ST1055 | STEEL COMP 1055 |
| ST1060 | STEEL COMP 1060 |
| ST1065 | STEEL COMP 1065 |
| ST1070 | STEEL COMP 1070 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1085 | STEEL COMP 1085 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1212 | STEEL COMP 1212 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0305 | STEEL COMP 305 |
| ST0316 | STEEL COMP 316 |
| ST0082 | STEEL COMP 316L |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0403 | STEEL COMP 403 |
| ST4130 | STEEL COMP 4130 |
| ST0090 | STEEL COMP 4130H |
| ST0099 | STEEL COMP 416SE |
| ST0430 | STEEL COMP 430 |
| ST0601 | STEEL COMP 601 |
| ST0631 | STEEL COMP 631 |
| ST1093 | STEEL COMP E3316 |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
ATEQ*DSCALE TYPE
INDICATES THE TYPE OF SCALE.
Enter the applicable reply code from the table below
(ATEQDCA*;ATEQDBH$$DCL*)
| Table 1 |
| Reply Code (AM12) | Reply |
| AW | ARC |
| AX | BLACK INK FUSED IN YELLOW GLASS TUBE |
| AY | BRIDGE |
| AZ | BROAD ARC DIAL |
| BA | CALIBRATED BRASS |
| AP | CIRCULAR |
| BB | CONCAVE HORIZONTAL |
| BC | CONCENTRIC |
| BD | CONCENTRIC ARC DIAL |
| BE | CONCENTRIC DIAL |
| BF | CONCENTRIC ROTATING DIAL |
| BG | DIAL |
| BH | DISK |
| BJ | DRUM |
| BK | ECCENTRIC |
| BL | ENCLOSED GLASS |
| BM | ENGRAVED BRASS |
| BN | ENGRAVED STEM |
| BP | ENGRAVED TUBE |
| BQ | ETCHED FLAT GLASS |
| BR | ETCHED STEM |
| BS | ETCHED TUBE |
| DP | FLUSH STAIN STEM MARKINGS |
| BT | FUSED STEM |
| DQ | GLASS FUSED STEM |
| AS | HORIZONTAL |
| BW | INCLOSED METAL |
| BX | INCLOSED PAPER |
| DY | LINEAR |
| DZ | METAL |
| BY | METAL BACK |
| BZ | METAL NONMAGNETIC |
| CA | METER DIAL |
| CJ | NONLINEAR |
| DG | PAINTED |
| CC | PAPER |
| CD | PLASTIC |
| CL | RECTANGULAR |
| CF | STEM |
| AT | VERTICAL |
BBJR*DRECORDING CHART TYPE
INDICATES THE TYPE OF RECORDING CHART PROVIDED.
Enter the applicable reply code from the table below
(BBJRDAJ)
| Table 1 |
| Reply Code (AM12) | Reply |
| AP | CIRCULAR |
| AJ | CONTINUOUS STRIP |
| CL | RECTANGULAR |
BKCB*JCHART SPEED
THE RATED SPEED AT WHICH THE CHART IS DESIGNED TO OPERATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BKCBJDR2.0*)
| Table 1 |
| Reply Code (AG20) | Reply |
| CE | CENTIMETERS PER HOUR |
| BQ | CENTIMETERS PER MINUTE |
| DH | INCHES PER HOUR |
| AS | INCHES PER SECOND |
| CD | MILLIMETERS PER SECOND |
| DJ | REVOLUTIONS PER 24 HOUR |
| DS | REVOLUTIONS PER 31 DAYS |
| DR | REVOLUTIONS PER 7 DAYS |
ANBL*DCHART DRIVE METHOD
THE MEANS BY WHICH THE CHART IS DRIVEN.
Enter the applicable reply code from the table below
(ANBLDAAC)
| Table 1 |
| Reply Code (AJ43) | Reply |
| AAN | ELECTRIC AC MOTOR |
| AAB | ELECTRIC CLOCK MOVEMENT |
| AAC | ELECTRIC DC MOTOR |
| AAM | SPRING |
| AAJ | SYNCHRONOUS MOTOR |
ASXH*JVOLTAGE RATING IN VOLTS
THE VOLTAGE RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASXHJBA2.0*;ASXHJBA2.0$$JBA2.1*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0)
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDC)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
BKCM*DACTUATING MEDIUM
AN INDICATION OF THE MEDIUM USED TO ACTUATE THE ITEM.
Enter the applicable reply code from the table below
(BKCMDAFM*;BKCMDAGA$$DAHS*)
| Table 1 |
| Reply Code (AB75) | Reply |
| AAB | AIR |
| AEP | ALCOHOL |
| AEQ | ALCOHOL BENZENE |
| AER | ALKAZENE 42 |
| AES | BLUE OIL |
| ABB | BUTANE |
| AET | CHEMICALS |
| AEW | DIBUTYL PHTHALATE |
| AEX | DICHLORODIFLUOROMETHANE R12 |
| AAH | DICHLORODIFLUOROMETHANE, TECHNICAL |
| AEY | DISTILLED MERCURY |
| AEZ | DISTILLED WATER |
| AFA | DRY NITROGEN |
| AFB | ETHER |
| AFC | ETHYL CHLORIDE |
| AFD | ETHYL ETHER |
| ABM | ETHYLENE GLYCOL |
| AFG | FREON 113 USE REFRIGERANT R-113 |
| AFE | FREON 12 USE REFRIGERANT R-12 |
| AFF | FREON 22 USE REFRIGERANT R-22 |
| ADC | FREON USE REFRIGERANT |
| AAC | FRESH WATER |
| ABE | GAS |
| AFH | GAS THERMAL |
| AFJ | GREEN FLUID CONCENTRATE MERIAN P/N D2930 |
| AFK | GREEN WATER SOLUTION |
| ACQ | HYDRAULIC FLUID, MIL-H-5606 |
| ACR | HYDRAULIC FLUID, MIL-H-8446 |
| AEH | HYDRAULIC FLUID, PHOSPHATE ESTER |
| ADH | HYDRAULIC OIL |
| AFL | ISO BUTANE |
| ACM | KEROSENE |
| AEC | LIQUID |
| ADD | LIQUID GAS |
| ADJ | LIQUID OXYGEN |
| AFM | LIQUID SOLID |
| AFN | LIQUID VAPOR PRESSURE |
| AFP | MANUFACTURER TRADE SECRET |
| AFQ | MERCURY |
| AFR | MERCURY AND DIBUTYL PHTHALATE |
| AFS | MERCURY THALLIUM AMALGAM |
| AFT | MERCURY THERMAL |
| AFW | METHYL ALCOHOL |
| AFX | METHYL CHLORIDE |
| ACA | METHYLENE CHLORIDE |
| AFY | METOXYLENE |
| AFZ | NEON |
| AAP | NITROGEN |
| AGA | NITROGEN GAS |
| AAD | OIL |
| AGB | ORGANIC LIQUID |
| AAQ | OXYGEN |
| ADE | PENTANE |
| ABC | PROPANE |
| AGC | RED ACETYLENE TETRABROMIDE |
| AGE | RED LIQUID |
| AGD | RED OIL |
| AHS | RELATIVE HUMIDITY |
| ADK | STEAM |
| AGF | SULPHUR DIOXIDE |
| AGG | THEOLINE |
| ACG | TOLUOL |
| AGH | VAPOR |
| AGJ | VAPOR PRESSURE |
| AGL | VAPOR TENSION |
| AGK | VAPOR THERMAL |
| AGM | VOLATILE LIQUID |
| AGN | VOLATILE VAPOR |
| ACN | WATER |
| ACH | XYLENE |
ABHC*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS. PLEASE USE MRC ABMK IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHCJAB2.0*;ABHCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLC2.0*;ABHPJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJLA2.0*;ABKWJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) ACS, AET, AFA, AHF, ATJ, ATK, ATL, ATM OR ATN WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (AKEJ and CRYY)
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (AEBV)
IF STYLE/REPLY CODE(s) ABY WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (ABTD)
AXHR*JMOUNTING FACILITY TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF FACILITIES BY WHICH THE ITEM IS MOUNTED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AXHRJBCX2*;AXHRJBCX2$$JBCX3*;AXHRJBCX2$JBCX2*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BWD | ADJUSTABLE |
| AWG | ADJUSTABLE ANGLE |
| BWE | ADJUSTABLE BACK |
| AWJ | BACK ANGLE |
| AQP | BACKPLATE |
| ABB | BASE |
| ADG | BAYONET |
| AFE | BAYONET LOCK |
| AAC | BOLT |
| AWK | BOTTOM |
| AWL | BOTTOM SWIVEL |
| ABC | BRACKET |
| ABD | BUSHING |
| ABF | CASE |
| AWM | CENTER BACK |
| ABH | CLAMP |
| AFL | CLIP |
| ARN | CONNECTION |
| AWN | CONVEX SHAPE |
| AWP | DIAL 360 DEGREE ROTATION AND STEM 180 DEGREE ROTATION TO SUIT ANY LOCATION |
| ARP | EXTERNAL NPTF CONNECTION |
| ARQ | EXTERNAL PIPE CONNECTION |
| ARS | EXTERNAL STRAIGHT THREAD CONNECTION |
| AFT | EXTERNAL THREAD |
| ACR | FLANGE |
| AGQ | FLUSH |
| ACP | HOLE |
| ASC | INSERTED NUTS |
| AGM | LOCKING BUSHING |
| AWR | LOWER BACK |
| BWF | MAGNET SURFACE |
| ASE | METAL CASE FIXED |
| ASF | METAL CASE FLANGE |
| ASG | METAL CASE RUBBER WASHER |
| ASH | METAL CASE SEPARABLE SOCKET |
| AED | PANEL |
| ASL | PEDESTAL |
| ASN | PIN CLIP |
| ASP | PIPE FITTING |
| ASQ | PLASTIC CASE FIXED |
| AEE | PLATE |
| AST | PORTABLE METAL CASE |
| ASX | PORTABLE WOOD BACK |
| BHB | RIGID |
| ASZ | RIGID STEM |
| ATA | RUBBER BUSHING |
| AQY | SEMIFLUSH |
| ARM | SHOCKPROOF CASE |
| ABY | SLOT |
| BCX | SLOTTED HOLE |
| BPZ | SOCKET STEM |
| AWS | STRAIGHT |
| AWT | STRAIGHT BOTTOM |
| AWX | STRAIGHT PARALLEL TO DIAL FACE |
| AWY | STRAIGHT STEM |
| AAE | STUD |
| AEG | SURFACE |
| ACS | THREAD |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE |
| ATJ | THREADED MALE CONNECTION |
| ATK | THREADED NECK |
| ATL | THREADED PIPE CONNECTION |
| ATM | THREADED SOCKET |
| ATN | THREADED STEM |
| AET | THREADED STUD |
| ATP | TOP HOOK |
| BWG | TURRET CASE WITH FLUSH RING |
| BWH | U-CLAMP |
| ATQ | UNION CONNECTION |
| ACQ | UNTHREADED HOLE |
| AEW | UNTHREADED STUD |
| ATS | WALL |
| AEJ | WALL BRACKET |
| ATT | WALL FLANGE |
| AKK | WELDED |
| BWJ | WOOD BACK, FIXED MOUNTING |
AKEJ*DMOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF SCREW THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER ON THE MOUNTING FACILITY.
Enter the applicable reply code from the table below
(AKEJDNJ)
| Table 1 |
| Reply Code (AH06) | Reply |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| SM | ISO M |
| SS | ISO S |
| NP | NPT |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JF | UNJF |
| NM | UNM |
| NS | UNS |
CRYY*JMOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A COAXIAL CYLINDER WHICH WOULD BOUND THE CREST OF AN EXTERNAL THREAD OR THE ROOT OF AN INTERNAL THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRYYJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AEBV*JUNTHREADED MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN UNTHREADED MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBVJAC2.0*;AEBVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTD*JMOUNTING SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTDJAA2.0*;ABTDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CGGK*JMOUNTING THREAD QUANTITY
THE NUMBER OF MOUNTING THREADS ON THE ITEM MEASURED ON A LINE PARALLEL TO THE THREAD AXIS,INCLUDING INCOMPLETE THREADS.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CGGKJJ2.0*;CGGKJJ2.0$JJ2.1*)
| Table 1 |
| Reply Code (AB39) | Reply |
| C | PER INCH |
| J | PER MILLIMETER |
AFFL*JMOUNTING BOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFFLJAB2.0*;AFFLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCCG*;CBBLDCCS$$DAAJ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| BGA | ADAPTER |
| CBW | ADJUSTABLE TWO PRONG HOOK |
| ACY | AMMETER |
| CBX | CARRYING TUBE W/CLIP |
| CVK | CHART PAPER |
| CBY | CLIP W/RING |
| CBZ | CONNECTOR PIPE THREAD |
| CCA | COPPER GASKET FOR ATTACHING TO 18MM SPARK PLUG |
| CCB | COPPER RIVET |
| CCC | DOUBLE-BORE PORCELAIN INSULATOR |
| CCD | DRY CELL BATTERY |
| CCE | EXPANSION CHAMBER |
| CCF | FLUORESCENT LAMP |
| BGP | FUSE |
| BQN | GASKET |
| CCG | HOLDING CLAMP |
| CCH | INCANDESCENT LAMP |
| CVL | INK |
| CDA | INK BOTTLE W/DROPPER |
| CCJ | INSTRUCTION MANUAL |
| CCK | LENS MAGNIFYING FRONT |
| CCL | MALE CONNECTOR |
| AAJ | MOUNTING HARDWARE |
| CCM | NEOPRENE TUBING CUSHION |
| CVM | PEN |
| CCN | PERFORATED BULB GUARD |
| CCP | PLUG CONNECTOR |
| CCQ | PLUG W/O RING |
| CCR | POTENTIOMETER |
| CCS | PROTECTIVE COVER |
| CCT | PROTECTIVE GLASS/PLASTIC |
| AXM | RESET BUTTON |
| AYX | RING |
| CCW | TEMPERATURE COMPENSATOR |
| CCX | WIRE WOUND RESISTOR |
| CCY | ZERO ADJUSTMENT |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
AARG*DRELIABILITY INDICATOR
AN INDICATION THAT THE LEVEL OF PROBABILITY THAT AN ITEM WILL OPERATE WITHOUT FAILURE,AT A SPECIFIED RATED CAPABILITY,AT A SPECIFIED TEMPERATURE,AND FOR A SPECIFIED PERIOD OF TIME,HAS BEEN ESTABLISHED BY TESTING RANDOM SAMPLES OF PRODUCTION LOT.
Enter the applicable reply code from the table below
(AARGDE)
| Table 1 |
| Reply Code (AA61) | Reply |
| E | ESTABLISHED |
| N | NOT ESTABLISHED |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPDA000*;PRMTDAUA000$DAZA000*;PRMTDAUA000$$DAZA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAGA000E2.0*;PMWTJAGA000E2.0$JAGA000E2.0*;PMWTJAGA000E2.0$$JAGA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRHA0002.0*;PMLCJRHA0002.0$JRHA0002.0*;PMLCJRHA0002.0$$JRHA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
BHHS*GCHART IDENTIFYING NUMBER
THE NUMBER ASSIGNED BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE CHART.
Enter clear text.
(BHHSGCLEARTEXT)
BGKZ*GSCALE INSCRIPTION/BACKGROUND COLOR
THE HUE OR TINT OF THE INSCRIPTION(S) AND/OR THAT PORTION OF THE SCALE WHICH SURROUNDS THE INSCRIPTION ON THE SCALE.
Enter clear text.
(BGKZGCLEARTEXT)
BKCN*GSCALE ACCURACY RATING
THE AMOUNT OF ACCURACY FOR WHICH THE SCALE IS RATED.
Enter clear text.
(BKCNGCLEARTEXT)
AMNK*GSCALE CALIBRATION
AN INDICATION OF THE MANNER IN WHICH THE SCALE IS CALIBRATED.
Enter clear text.
(AMNKGCLEARTEXT)
AWAG*JSCALE SMALLEST INCREMENT
THE SMALLEST VALUE BETWEEN THE MARKINGS ON A SCALE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWAGJKX2.0*;AWAGJKX2.0$$JKX2.1*)
| Table 1 |
| Reply Code (AG67) | Reply |
| GT | DEG CELSIUS |
| GW | DEG FAHRENHEIT |
| KX | MILLIVOLTS |
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAP6)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAL5)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information