An item consisting of one or two earphones with a connecting cord and with or without a headband. Single headphone type must include facilities as required for use. For items without earphones designed to protect the ears from noise, see PROTECTOR, HEARING.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00737*)
AARAATERMINAL QUANTITY
THE NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION TO THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AARAA10*)
IF STYLE/REPLY CODE(s) 8 OR 9 WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AHFL and AHFM and AHFN)
AAQLLBODY STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BODY.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAQLL9)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAM1431 | 8 | HEADSET, COVERED |
| AAM1432 | 9 | HEADSET, MOLDED |
AHFN*JHEADSET OVERALL DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHFNJAA2.0*;AHFNJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHFM*JHEADSET OVERALL WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHFMJAA2.0*;AHFMJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHFL*JHEADSET OVERALL HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHFLJAA2.0*;AHFLJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACYWJIMPEDANCE RATING IN OHMS
THE TOTAL OPPOSITION /RESISTIVE AND REACTIVE/ WHICH THE ITEM OFFERS TO THE FLOW OF AN ALTERNATING CURRENT,EXPRESSED IN OHMS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYWJB2.0*;ACYWJB2.0$$JB2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) AAAV, AABU OR AADK WERE ENTERED FOR MRC AHBM, YOU MUST ANSWER MRC (AEEE and AEEF)
IF STYLE/REPLY CODE(s) BP WERE ENTERED FOR MRC AHBM, YOU MUST ANSWER MRC (AEEE and AEEF)
AHBMDINPUT TERMINAL TYPE
INDICATES THE TYPE OF INPUT TERMINAL(S) FOR PROVIDING ELECTRICAL CONNECTION TO THE ITEM.
Enter the applicable reply code from the table below
(AHBMDBB*;AHBMDFD$$DEU*)
| Table 1 |
| Reply Code (AA58) | Reply |
| AAAT | BANANA PLUG |
| AABB | CLIP |
| BP | CONNECTOR, PLUG |
| AABU | DUAL PLUG |
| AAAV | DUAL PLUG,POLARIZED |
| FD | JACK |
| AAAU | PHONE TIP |
| EU | PIN JACK |
| AADK | PLUG |
| AACH | SCREW |
| AU | TAB W/SCREW |
| AT | TAB, SOLDER LUG |
| BB | WIRE LEAD |
AEEF*ACONNECTOR MANUFACTURER PART NUMBER
THE IDENTIFYING PART NUMBER ASSIGNED TO THE ELECTRICAL CONNECTOR RECEPTACLE.
Enter the alpha-numeric reply with a minimum of one character.
(AEEFAL0)
AEEE*ACONNECTOR MANUFACTURER CODE
THE IDENTIFYING NUMERIC CODE OF THE ORIGINATOR THAT CONTROLS OR MANUFACTURES THE ELECTRICAL CONNECTOR RECEPTACLE.
Enter the alpha-numeric reply with five character(s) exactly.
(AEEEAF6Q2E)
AHEMJHEADSET CORD LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE HEADSET CORD,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHEMJAA2.0*;AHEMJAB2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHEQDEARPHONE ELEMENT TYPE
INDICATES THE TYPE OF EARPHONE ELEMENT AS DETERMINED BY ITS CONSTRUCTION AND METHOD OF OPERATION.
Enter the applicable reply code from the table below
(AHEQDE*;AHEQDF$DG*;AHEQDF$$DG*)
| Table 1 |
| Reply Code (AE76) | Reply |
| A | BONE CONDUCTION |
| E | CRYSTAL |
| F | DYNAMIC |
| G | MAGNETIC |
AHERDCHANNEL MONITOR CAPABILITY
THE DESIGNED ABILITY OF THE ITEM TO MONITOR CHANNELS.
Enter the applicable reply code from the table below
(AHERDC*;AHERDB$DC*;AHERDB$$DC*)
| Table 1 |
| Reply Code (AF26) | Reply |
| C | DUAL CHANNEL |
| B | SINGLE CHANNEL |
AHESAEARPHONE QUANTITY
THE NUMBER OF EARPHONES PROVIDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AHESA10*)
AHEXDEARPHONE INTERCONNECTION ARRANGEMENT
THE DESIGNATION THAT IDENTIFIES THE ELECTRICAL CIRCUIT ARRANGEMENT THROUGH WHICH AN INCOMING SIGNAL IS CONDUCTED TO THE EARPHONE/S/.
Enter the applicable reply code from the table below
(AHEXDB*;AHEXDF$DD*;AHEXDF$$DD*)
| Table 1 |
| Reply Code (AD62) | Reply |
| B | PARALLEL |
| D | SERIES |
| F | SINGLE |
| E | SPLIT CIRCUIT |
AHFSDACOUSTIC SENSITIVITY REFERENCE RATING
THE ELECTRICAL INPUT POWER AND SOUND PRESSURE OUTPUT RATINGS WHICH ARE USED AS A BASE REFERENCE FOR THE MEASUREMENT OF THE SENSITIVITY OF AN ITEM.
Enter the applicable reply code from the table below
(AHFSDN*;AHFSDAF$$DAQ*)
| Table 1 |
| Reply Code (AF28) | Reply |
| AM | 0.0002 DYNES PER SQ CENTIMETER |
| AN | 0.5 MILLIWATTS PER 0.0002 MICROBARS |
| AB | 0.5 VOLTS PER 0.0002 MICROBARS |
| AE | 1 MILLIWATT PER 0.0002 MICROBARS |
| AP | 1 MILLIWATT PER 0.0002 SQ CENTIMETER |
| AF | 1 MILLIWATT PER 10 MICROBARS |
| AD | 1 VOLT PER 100 MICROBARS |
| AC | 1 VOLT PER MICROBAR |
| AL | 10 DYNES PER SQ CENTIMETER |
| AJ | 115 MILLIWATTS PER 0.0002 MICROBARS |
| AH | 15.6 MILLIWATTS PER 0.0002 MICROBARS |
| BM | 4 MILLIWATTS PER 0.0002 MICROBARS |
| AK | 6 MICROWATTS PER 0.0002 MICROBARS |
| AG | 6 MILLIWATTS PER 100 MICROBARS |
| AQ | 6.3 DYNES PER SQ CENTIMETER |
| N | NOT RATED |
AHFUDHEADSET CONNECTING CORD TERMINATION LOCATION
INDICATES THE LOCATION OF THE INPUT CONNECTION HEADSET WITH RESPECT TO THE WEARER.
Enter the applicable reply code from the table below
(AHFUDB*;AHFUDE$DD*;AHFUDE$$DD*)
| Table 1 |
| Reply Code (AF29) | Reply |
| E | AT CENTER CONNECTION |
| C | AT WEARERS LEFT |
| B | AT WEARERS RIGHT |
| D | REVERSIBLE RIGHT-LEFT |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFNY*;CBBLDFNY$$DFNY*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FNY | ROHS DIRECTIVE COMPLIANCE |
AHEP*DACCOMMODATED HELMET TYPE
INDICATES THE TYPE OF HELMET ACCOMMODATED BY THE ITEM.
Enter the applicable reply code from the table below
(AHEPDB*;AHEPDF$DE*;AHEPDF$$DE*)
| Table 1 |
| Reply Code (AF25) | Reply |
| C | ARMORED VEHICLE |
| J | DIVER |
| D | FLIGHT |
| E | FLIGHT DECK CREW |
| B | INFANTRY |
| H | MISSILE SILO |
| F | PARACHUTISTS |
| G | TALKER |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDACF*;ABFFDEM$DACG*;ABFFDEM$$DACG*)
| Table 1 |
| Reply Code (AB28) | Reply |
| FT | AMPLIFIER |
| BZZ | BELTSWITCH KIT |
| FU | CHIN STRAP |
| ACF | CORD CLOTHING CLIP |
| RD | EAR CLIP |
| FS | EAR CUSHION |
| FR | EXTENSION CORD |
| AS | FERRULE |
| FQ | HEADBAND CUSHION |
| AA | NONE |
| ACG | STOPPER |
| EM | VOLUME CONTROL |
AHFP*DIMPEDANCE MATCHING DEVICE TYPE
INDICATES THE TYPE OF DEVICE USED TO MATCH THE IMPEDANCE OF THE ITEM TO THE IMPEDANCE OF THE OUTPUT CIRCUIT.
Enter the applicable reply code from the table below
(AHFPDC*;AHFPDB$DC*;AHFPDB$$DC*)
| Table 1 |
| Reply Code (AF27) | Reply |
| C | SOLID STATE |
| B | TRANSFORMER |
AHFR*BREFERENCE FREQUENCY IN HERTZ
THE POINT IN THE RESPONSE FREQUENCY SPECTRUM WHERE THE MAXIMUM AUDITORY OUTPUT OF A FIXED INPUT SIGNAL OCCURS AND FROM WHICH ATTENUATION,IMPEDANCE,AND RESPONSE BANDWIDTHS ARE DETERMINED,EXPRESSED IN HERTZ.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AHFRB2.0)
Although an F mode MRC allows for a negative value (‘M’) to be entered; A negative value ‘M’ will not be entered as there is no such thing as a negative frequency; therefor both range values will be represented with a ‘P’ followed by a minimum of one numeric, a decimal, and a minimum of one numeric.
AFYW*FFREQUENCY RESPONSE RANGE IN HERTZ
THE MINIMUM AND MAXIMUM FREQUENCIES TO WHICH THE ITEM WILL RESPOND,EXPRESSED IN HERTZ.
Enter the range of positive ‘P’ numeric values with a minimum of one digit on both sides of the decimal. Separating range values with a slash. Both numeric values will be positive values with a ‘P’ for this MRC
(AFYWFP2.0/P4.7*;AFYWFP0.0/P0.5)
AFZA*BOUTPUT SENSITIVITY RATING IN DECIBELS
THE RATING INDICATING THE RATIO OF THE OUTPUT VOLTAGE OR POWER TO THE INPUT VOLTAGE OR POWER AT A SPECIFIED REFERENCE ENERGY LEVEL,EXPRESSED IN DECIBELS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AFZAB2.0*;AFZAB2.0$$BM2.0*)
BKSYDEARPHONE MOUNTING METHOD
THE MEANS OF ATTACHING THE EARPHONE.
Enter the applicable reply code from the table below
(BKSYDBFU*;BKSYDABS$DBFS*;BKSYDABS$$DBFS*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BEV | DIAMETRICALLY OPPOSED HOLES IN OUTSIDE PERIPHERY OF CASE |
| BFS | FRICTION ROD |
| BTR | PREPARED MOLDED CAVITY |
| ABS | RETAINER RING |
| BFU | SCREW PLATE ON CASE BACK |
| BFV | SOCKET SNAP-IN BALL |
| BGU | THUMBSCREW FOR WIRE HARP |
CSCFDTERMINAL TYPE
INDICATES THE TYPE OF TERMINAL FOR PROVIDING ELECTRICAL CONNECTION TO THE ITEM.
Enter the applicable reply code from the table below
(CSCFDABB*;CSCFDABD$DABQ*;CSCFDABD$$DABQ*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AHL | JACK |
| ABQ | SCREW |
| ASD | SETSCREW |
| ABB | TAB, SOLDER LUG |
| ABD | THREADED STUD |
| ACC | WIRE LEAD |
CQTMDTERMINAL LOCATION
INDICATES THE LOCATION OF THE TERMINAL/S/ ON THE ITEM.
Enter the applicable reply code from the table below
(CQTMDEXT*;CQTMDNTE$DNTE*;CQTMDNTE$$DNTE*)
| Table 1 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
CSPTDSHELL MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE SHELL IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSPT3AEEDALA000*;CSPT3AEEDALA000$DRCW000*;CSPT3AEEDALA000$$DRCW000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AVV | EARPHONE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| PCA000 | PLASTIC |
| PCAP00 | PLASTIC VINYL |
| PCDA01 | POLYAMIDE NYLON |
| RCE000 | RUBBER |
| RCW000 | RUBBER FOAM SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AHGA*AELECTRICAL CORD IDENTIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS IDENTIFICATION NUMBER OR SYMBOL USED TO IDENTIFY THE ELECTRICAL CORD.
Enter the alpha-numeric reply with a minimum of one character.
(AHGAAX5)
AHGB*AELECTRICAL CORD MANUFACTURER CODE
THE IDENTIFYING NUMERIC CODE OF THE ORIGINATOR THAT CONTROLS OR MANUFACTURES THE ELECTRICAL CORD.
Enter the alpha-numeric reply with five character(s) exactly.
(AHGBAE8F6E)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAGA000*;PRMTDIRA000$DPDA000*;PRMTDIRA000$$DPDA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000R2.0*;PMWTJRTA000E2.0$JRTA000E2.0*;PMWTJRTA000E2.0$$JRTA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$JIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CCPS*DHEADBAND TYPE
INDICATES THE TYPE OF HEADBAND FURNISHED.
Enter the applicable reply code from the table below
(CCPSDLF*;CCPSDME$DLU*)
| Table 1 |
| Reply Code (AF69) | Reply |
| LU | ADJUSTABLE DOUBLE BAND |
| LF | ADJUSTABLE SINGLE BAND |
| ME | FIXED DOUBLE BAND |
| LV | FIXED SINGLE BAND |
CYGJ*DCOVERING MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE COVERING IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CYGJ3CEQDRCE000*;CYGJ3CEQDRCE000$DRCB000*;CYGJ3CEQDRCE000$$DRCB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CEQ | HEADBAND |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| CCA000 | COTTON |
| LRA000 | LEATHER |
| PCA000 | PLASTIC |
| PCAP00 | PLASTIC VINYL |
| PCDA01 | POLYAMIDE NYLON |
| RCE000 | RUBBER |
| RCW000 | RUBBER FOAM SYNTHETIC |
| RCB000 | RUBBER SYNTHETIC |
BKSZ*DMICROPHONE MOUNTING FACILITY
THE MEANS PROVIDED TO MOUNT OR OTHERWISE ACCOMMODATE A MICROPHONE.
Enter the applicable reply code from the table below
(BKSZDBRU*;BKSZDBSV$DBSU*;BKSZDBSV$$DBSU*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BRU | BRACKET FOR LEFTHAND MOUNTING OF BOOM MICROPHONE |
| BSU | BRACKET FOR MOUNTING BOOM MICROPHONE EITHER SIDE |
| BRV | BRACKET FOR RIGHTHAND MOUNTING OF BOOM MICROPHONE |
| BSV | ELECTRICAL CONNECTOR FOR HANDHELD MICROPHONE |
CTJS*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMERED BY PACKAGING OR PACKING MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJSJOZA2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| GM | GRAMS |
| OZ | OUNCES |
| LB | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information