An item designed to establish the necessary accommodations to connect a waveguide to a coaxial line, or to connect two or more terminated waveguides whose physical design does not normally allow connection.
ISAC Reply 3AEE added to MRC AHRV.
ISAC Reply 3CND added to MRC AHRV.
ISAC Reply 3CNE added to MRC AHRV.
ISAC Reply 3CNJ added to MRC AHRV.
ISAC Reply 3CNK added to MRC AHRV.
ISAC Reply 3HOU added to MRC AHRV.
ISAC Reply 1A deleted from MRC AHRV.
ISAC Reply 1B deleted from MRC AHRV.
ISAC Reply 1C deleted from MRC AHRV.
ISAC Reply 1D deleted from MRC AHRV.
ISAC Reply 1E deleted from MRC AHRV.
ISAC Reply 1F deleted from MRC AHRV.
ISAC Reply 1X deleted from MRC AHRV.
ISAC Reply 1Z deleted from MRC AHRV.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3CND added to MRC MATT.
ISAC Reply 3CNJ added to MRC MATT.
ISAC Reply 3CNK added to MRC MATT.
ISAC Reply 3CNZ added to MRC MATT.
ISAC Reply 3COB added to MRC MATT.
ISAC Reply 3COC added to MRC MATT.
ISAC Reply 3COE added to MRC MATT.
ISAC Reply 3COF added to MRC MATT.
ISAC Reply 3COH added to MRC MATT.
ISAC Reply 3COI added to MRC MATT.
ISAC Reply 3CPA added to MRC MATT.
ISAC Reply 3CPB added to MRC MATT.
ISAC Reply 3CPC added to MRC MATT.
ISAC Reply 3CPD added to MRC MATT.
ISAC Reply 3CPE added to MRC MATT.
ISAC Reply 3CPG added to MRC MATT.
ISAC Reply 3CPH added to MRC MATT.
ISAC Reply 3CPI added to MRC MATT.
ISAC Reply 3CPJ added to MRC MATT.
ISAC Reply 3CPK added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1X deleted from MRC MATT.
ISAC Reply 1Z deleted from MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3CPM added to MRC SFTT.
ISAC Reply 3CPP added to MRC SFTT.
ISAC Reply 3CPS added to MRC SFTT.
ISAC Reply 3CPT added to MRC SFTT.
ISAC Reply 3CPY added to MRC SFTT.
ISAC Reply 3CQB added to MRC SFTT.
ISAC Reply 3CQD added to MRC SFTT.
ISAC Reply 3CQE added to MRC SFTT.
ISAC Reply 3CRA added to MRC SFTT.
ISAC Reply 3CRB added to MRC SFTT.
ISAC Reply 3CRC added to MRC SFTT.
ISAC Reply 3CRD added to MRC SFTT.
ISAC Reply 3CRE added to MRC SFTT.
ISAC Reply 3CRF added to MRC SFTT.
ISAC Reply 3CRG added to MRC SFTT.
ISAC Reply 3CRH added to MRC SFTT.
ISAC Reply 3CRI added to MRC SFTT.
ISAC Reply 3CRK added to MRC SFTT.
ISAC Reply 3CRL added to MRC SFTT.
ISAC Reply 3CRR added to MRC SFTT.
ISAC Reply 3CRS added to MRC SFTT.
ISAC Reply 3CRT added to MRC SFTT.
ISAC Reply 3CRU added to MRC SFTT.
ISAC Reply 3CRV added to MRC SFTT.
ISAC Reply 3CRW added to MRC SFTT.
ISAC Reply 3CRX added to MRC SFTT.
ISAC Reply 3CRY added to MRC SFTT.
ISAC Reply 3CRZ added to MRC SFTT.
ISAC Reply 3CSB added to MRC SFTT.
ISAC Reply 3CSC added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 3IFO added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1X deleted from MRC SFTT.
ISAC Reply 1Z deleted from MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1X deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC CTCJ.
ISAC Reply 3COB added to MRC CTCJ.
ISAC Reply 3COH added to MRC CTCJ.
ISAC Reply 3COL added to MRC CTCJ.
ISAC Reply 3CPC added to MRC CTCJ.
ISAC Reply 3CSH added to MRC CTCJ.
ISAC Reply 3HOU added to MRC CTCJ.
ISAC Reply 1A deleted from MRC CTCJ.
ISAC Reply 1B deleted from MRC CTCJ.
ISAC Reply 1C deleted from MRC CTCJ.
ISAC Reply 1D deleted from MRC CTCJ.
ISAC Reply 1E deleted from MRC CTCJ.
ISAC Reply 1F deleted from MRC CTCJ.
ISAC Reply 1X deleted from MRC CTCJ.
ISAC Reply 1Z deleted from MRC CTCJ.
ISAC Reply 3AEE added to MRC AHSX.
ISAC Reply 3COB added to MRC AHSX.
ISAC Reply 3COH added to MRC AHSX.
ISAC Reply 3COL added to MRC AHSX.
ISAC Reply 3CPC added to MRC AHSX.
ISAC Reply 3CSH added to MRC AHSX.
ISAC Reply 3HOU added to MRC AHSX.
ISAC Reply 1A deleted from MRC AHSX.
ISAC Reply 1B deleted from MRC AHSX.
ISAC Reply 1C deleted from MRC AHSX.
ISAC Reply 1D deleted from MRC AHSX.
ISAC Reply 1E deleted from MRC AHSX.
ISAC Reply 1F deleted from MRC AHSX.
ISAC Reply 1X deleted from MRC AHSX.
ISAC Reply 1Z deleted from MRC AHSX.
ISAC Reply 3AEE added to MRC AHSY.
ISAC Reply 3COB added to MRC AHSY.
ISAC Reply 3COH added to MRC AHSY.
ISAC Reply 3COL added to MRC AHSY.
ISAC Reply 3CPC added to MRC AHSY.
ISAC Reply 3CSH added to MRC AHSY.
ISAC Reply 3HOU added to MRC AHSY.
ISAC Reply 1A deleted from MRC AHSY.
ISAC Reply 1B deleted from MRC AHSY.
ISAC Reply 1C deleted from MRC AHSY.
ISAC Reply 1D deleted from MRC AHSY.
ISAC Reply 1E deleted from MRC AHSY.
ISAC Reply 1F deleted from MRC AHSY.
ISAC Reply 1X deleted from MRC AHSY.
ISAC Reply 1Z deleted from MRC AHSY.
ISAC Reply 3AEE added to MRC AHSZ.
ISAC Reply 3COB added to MRC AHSZ.
ISAC Reply 3COH added to MRC AHSZ.
ISAC Reply 3CPC added to MRC AHSZ.
ISAC Reply 3CSH added to MRC AHSZ.
ISAC Reply 3HOU added to MRC AHSZ.
ISAC Reply 1A deleted from MRC AHSZ.
ISAC Reply 1B deleted from MRC AHSZ.
ISAC Reply 1C deleted from MRC AHSZ.
ISAC Reply 1D deleted from MRC AHSZ.
ISAC Reply 1E deleted from MRC AHSZ.
ISAC Reply 1F deleted from MRC AHSZ.
ISAC Reply 1X deleted from MRC AHSZ.
ISAC Reply 1Z deleted from MRC AHSZ.
ISAC Reply 3AEE added to MRC AHTA.
ISAC Reply 3COB added to MRC AHTA.
ISAC Reply 3COH added to MRC AHTA.
ISAC Reply 3COL added to MRC AHTA.
ISAC Reply 3CPC added to MRC AHTA.
ISAC Reply 3CSH added to MRC AHTA.
ISAC Reply 3HOU added to MRC AHTA.
ISAC Reply 1A deleted from MRC AHTA.
ISAC Reply 1B deleted from MRC AHTA.
ISAC Reply 1C deleted from MRC AHTA.
ISAC Reply 1D deleted from MRC AHTA.
ISAC Reply 1E deleted from MRC AHTA.
ISAC Reply 1F deleted from MRC AHTA.
ISAC Reply 1X deleted from MRC AHTA.
ISAC Reply 1Z deleted from MRC AHTA.
ISAC Reply 3AEE added to MRC AHTB.
ISAC Reply 3COB added to MRC AHTB.
ISAC Reply 3COH added to MRC AHTB.
ISAC Reply 3COL added to MRC AHTB.
ISAC Reply 3CPC added to MRC AHTB.
ISAC Reply 3CSH added to MRC AHTB.
ISAC Reply 3HOU added to MRC AHTB.
ISAC Reply 1A deleted from MRC AHTB.
ISAC Reply 1B deleted from MRC AHTB.
ISAC Reply 1C deleted from MRC AHTB.
ISAC Reply 1D deleted from MRC AHTB.
ISAC Reply 1E deleted from MRC AHTB.
ISAC Reply 1F deleted from MRC AHTB.
ISAC Reply 1X deleted from MRC AHTB.
ISAC Reply 1Z deleted from MRC AHTB.
ISAC Reply 3AEE added to MRC AHTC.
ISAC Reply 3COB added to MRC AHTC.
ISAC Reply 3COH added to MRC AHTC.
ISAC Reply 3COL added to MRC AHTC.
ISAC Reply 3CPC added to MRC AHTC.
ISAC Reply 3CSH added to MRC AHTC.
ISAC Reply 3HOU added to MRC AHTC.
ISAC Reply 1A deleted from MRC AHTC.
ISAC Reply 1B deleted from MRC AHTC.
ISAC Reply 1C deleted from MRC AHTC.
ISAC Reply 1D deleted from MRC AHTC.
ISAC Reply 1E deleted from MRC AHTC.
ISAC Reply 1F deleted from MRC AHTC.
ISAC Reply 1X deleted from MRC AHTC.
ISAC Reply 1Z deleted from MRC AHTC.
ISAC Reply 3AEE added to MRC AHTD.
ISAC Reply 3COB added to MRC AHTD.
ISAC Reply 3COH added to MRC AHTD.
ISAC Reply 3COL added to MRC AHTD.
ISAC Reply 3CPC added to MRC AHTD.
ISAC Reply 3CSH added to MRC AHTD.
ISAC Reply 3HOU added to MRC AHTD.
ISAC Reply 1A deleted from MRC AHTD.
ISAC Reply 1B deleted from MRC AHTD.
ISAC Reply 1C deleted from MRC AHTD.
ISAC Reply 1D deleted from MRC AHTD.
ISAC Reply 1E deleted from MRC AHTD.
ISAC Reply 1F deleted from MRC AHTD.
ISAC Reply 1X deleted from MRC AHTD.
ISAC Reply 1Z deleted from MRC AHTD.
ISAC Reply 3AEE added to MRC CSQT.
ISAC Reply 3CSI added to MRC CSQT.
ISAC Reply 3CSJ added to MRC CSQT.
ISAC Reply 3CSM added to MRC CSQT.
ISAC Reply 3CSN added to MRC CSQT.
ISAC Reply 3CSO added to MRC CSQT.
ISAC Reply 3CSP added to MRC CSQT.
ISAC Reply 3CSR added to MRC CSQT.
ISAC Reply 3CSS added to MRC CSQT.
ISAC Reply 3CSU added to MRC CSQT.
ISAC Reply 3CTB added to MRC CSQT.
ISAC Reply 3CTC added to MRC CSQT.
ISAC Reply 3CTD added to MRC CSQT.
ISAC Reply 3CTF added to MRC CSQT.
ISAC Reply 3CTG added to MRC CSQT.
ISAC Reply 3CTH added to MRC CSQT.
ISAC Reply 3CTI added to MRC CSQT.
ISAC Reply 3CTJ added to MRC CSQT.
ISAC Reply 3CTL added to MRC CSQT.
ISAC Reply 3CTM added to MRC CSQT.
ISAC Reply 3HOU added to MRC CSQT.
ISAC Reply 3IFP added to MRC CSQT.
ISAC Reply 1A deleted from MRC CSQT.
ISAC Reply 1B deleted from MRC CSQT.
ISAC Reply 1C deleted from MRC CSQT.
ISAC Reply 1D deleted from MRC CSQT.
ISAC Reply 1E deleted from MRC CSQT.
ISAC Reply 1F deleted from MRC CSQT.
ISAC Reply 1X deleted from MRC CSQT.
ISAC Reply 1Z deleted from MRC CSQT.
ISAC Reply 1A deleted from MRC CSQT.
ISAC Reply 1B deleted from MRC CSQT.
ISAC Reply 1C deleted from MRC CSQT.
ISAC Reply 1D deleted from MRC CSQT.
ISAC Reply 1E deleted from MRC CSQT.
ISAC Reply 1F deleted from MRC CSQT.
ISAC Reply 1X deleted from MRC CSQT.
ISAC Reply 1Z deleted from MRC CSQT.
ISAC Reply 3AEE added to MRC AHTN.
ISAC Reply 3CSI added to MRC AHTN.
ISAC Reply 3CSJ added to MRC AHTN.
ISAC Reply 3CSM added to MRC AHTN.
ISAC Reply 3CSN added to MRC AHTN.
ISAC Reply 3CSP added to MRC AHTN.
ISAC Reply 3CSR added to MRC AHTN.
ISAC Reply 3CSS added to MRC AHTN.
ISAC Reply 3CST added to MRC AHTN.
ISAC Reply 3CSU added to MRC AHTN.
ISAC Reply 3CTB added to MRC AHTN.
ISAC Reply 3CTC added to MRC AHTN.
ISAC Reply 3CTD added to MRC AHTN.
ISAC Reply 3CTF added to MRC AHTN.
ISAC Reply 3CTG added to MRC AHTN.
ISAC Reply 3CTH added to MRC AHTN.
ISAC Reply 3CTI added to MRC AHTN.
ISAC Reply 3CTJ added to MRC AHTN.
ISAC Reply 3CTL added to MRC AHTN.
ISAC Reply 3CTM added to MRC AHTN.
ISAC Reply 3HOU added to MRC AHTN.
ISAC Reply 1A deleted from MRC AHTN.
ISAC Reply 1B deleted from MRC AHTN.
ISAC Reply 1C deleted from MRC AHTN.
ISAC Reply 1D deleted from MRC AHTN.
ISAC Reply 1E deleted from MRC AHTN.
ISAC Reply 1F deleted from MRC AHTN.
ISAC Reply 1X deleted from MRC AHTN.
ISAC Reply 1Z deleted from MRC AHTN.
ISAC Reply 1A deleted from MRC AHTN.
ISAC Reply 1B deleted from MRC AHTN.
ISAC Reply 1C deleted from MRC AHTN.
ISAC Reply 1D deleted from MRC AHTN.
ISAC Reply 1E deleted from MRC AHTN.
ISAC Reply 1F deleted from MRC AHTN.
ISAC Reply 1X deleted from MRC AHTN.
ISAC Reply 1Z deleted from MRC AHTN.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3CSI added to MRC THSD.
ISAC Reply 3CSJ added to MRC THSD.
ISAC Reply 3CSM added to MRC THSD.
ISAC Reply 3CSN added to MRC THSD.
ISAC Reply 3CSO added to MRC THSD.
ISAC Reply 3CSP added to MRC THSD.
ISAC Reply 3CSR added to MRC THSD.
ISAC Reply 3CSS added to MRC THSD.
ISAC Reply 3CSU added to MRC THSD.
ISAC Reply 3CTB added to MRC THSD.
ISAC Reply 3CTC added to MRC THSD.
ISAC Reply 3CTD added to MRC THSD.
ISAC Reply 3CTF added to MRC THSD.
ISAC Reply 3CTG added to MRC THSD.
ISAC Reply 3CTI added to MRC THSD.
ISAC Reply 3CTL added to MRC THSD.
ISAC Reply 3CTM added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 1F deleted from MRC THSD.
ISAC Reply 1X deleted from MRC THSD.
ISAC Reply 1Z deleted from MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 1F deleted from MRC THSD.
ISAC Reply 1X deleted from MRC THSD.
ISAC Reply 1Z deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3CSI added to MRC CQJX.
ISAC Reply 3CSJ added to MRC CQJX.
ISAC Reply 3CSM added to MRC CQJX.
ISAC Reply 3CSN added to MRC CQJX.
ISAC Reply 3CSO added to MRC CQJX.
ISAC Reply 3CSP added to MRC CQJX.
ISAC Reply 3CSR added to MRC CQJX.
ISAC Reply 3CSS added to MRC CQJX.
ISAC Reply 3CSU added to MRC CQJX.
ISAC Reply 3CTB added to MRC CQJX.
ISAC Reply 3CTC added to MRC CQJX.
ISAC Reply 3CTD added to MRC CQJX.
ISAC Reply 3CTF added to MRC CQJX.
ISAC Reply 3CTG added to MRC CQJX.
ISAC Reply 3CTI added to MRC CQJX.
ISAC Reply 3CTL added to MRC CQJX.
ISAC Reply 3CTM added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 1F deleted from MRC CQJX.
ISAC Reply 1X deleted from MRC CQJX.
ISAC Reply 1Z deleted from MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 1F deleted from MRC CQJX.
ISAC Reply 1X deleted from MRC CQJX.
ISAC Reply 1Z deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3CSI added to MRC AAJD.
ISAC Reply 3CSM added to MRC AAJD.
ISAC Reply 3CSN added to MRC AAJD.
ISAC Reply 3CSO added to MRC AAJD.
ISAC Reply 3CSP added to MRC AAJD.
ISAC Reply 3CSR added to MRC AAJD.
ISAC Reply 3CSS added to MRC AAJD.
ISAC Reply 3CSU added to MRC AAJD.
ISAC Reply 3CTB added to MRC AAJD.
ISAC Reply 3CTC added to MRC AAJD.
ISAC Reply 3CTD added to MRC AAJD.
ISAC Reply 3CTF added to MRC AAJD.
ISAC Reply 3CTG added to MRC AAJD.
ISAC Reply 3CTI added to MRC AAJD.
ISAC Reply 3CTL added to MRC AAJD.
ISAC Reply 3CTM added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1E deleted from MRC AAJD.
ISAC Reply 1F deleted from MRC AAJD.
ISAC Reply 1X deleted from MRC AAJD.
ISAC Reply 1Z deleted from MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1E deleted from MRC AAJD.
ISAC Reply 1F deleted from MRC AAJD.
ISAC Reply 1X deleted from MRC AAJD.
ISAC Reply 1Z deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3CSM added to MRC CMLP.
ISAC Reply 3CSN added to MRC CMLP.
ISAC Reply 3CSO added to MRC CMLP.
ISAC Reply 3CSR added to MRC CMLP.
ISAC Reply 3CSS added to MRC CMLP.
ISAC Reply 3CSU added to MRC CMLP.
ISAC Reply 3CTB added to MRC CMLP.
ISAC Reply 3CTC added to MRC CMLP.
ISAC Reply 3CTF added to MRC CMLP.
ISAC Reply 3CTG added to MRC CMLP.
ISAC Reply 3CTI added to MRC CMLP.
ISAC Reply 3CTM added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1E deleted from MRC CMLP.
ISAC Reply 1F deleted from MRC CMLP.
ISAC Reply 1X deleted from MRC CMLP.
ISAC Reply 1Z deleted from MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1E deleted from MRC CMLP.
ISAC Reply 1F deleted from MRC CMLP.
ISAC Reply 1X deleted from MRC CMLP.
ISAC Reply 1Z deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3CSI added to MRC AAJF.
ISAC Reply 3CSJ added to MRC AAJF.
ISAC Reply 3CSM added to MRC AAJF.
ISAC Reply 3CSN added to MRC AAJF.
ISAC Reply 3CSO added to MRC AAJF.
ISAC Reply 3CSP added to MRC AAJF.
ISAC Reply 3CSR added to MRC AAJF.
ISAC Reply 3CSS added to MRC AAJF.
ISAC Reply 3CSU added to MRC AAJF.
ISAC Reply 3CTB added to MRC AAJF.
ISAC Reply 3CTC added to MRC AAJF.
ISAC Reply 3CTD added to MRC AAJF.
ISAC Reply 3CTF added to MRC AAJF.
ISAC Reply 3CTG added to MRC AAJF.
ISAC Reply 3CTH added to MRC AAJF.
ISAC Reply 3CTI added to MRC AAJF.
ISAC Reply 3CTL added to MRC AAJF.
ISAC Reply 3CTM added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
ISAC Reply 1F deleted from MRC AAJF.
ISAC Reply 1X deleted from MRC AAJF.
ISAC Reply 1Z deleted from MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
ISAC Reply 1F deleted from MRC AAJF.
ISAC Reply 1X deleted from MRC AAJF.
ISAC Reply 1Z deleted from MRC AAJF.
ISAC Reply 3AEE added to MRC ACJL.
ISAC Reply 3CNM added to MRC ACJL.
ISAC Reply 3CNO added to MRC ACJL.
ISAC Reply 3CNV added to MRC ACJL.
ISAC Reply 3CNW added to MRC ACJL.
ISAC Reply 3CNX added to MRC ACJL.
ISAC Reply 3HOU added to MRC ACJL.
ISAC Reply 1A deleted from MRC ACJL.
ISAC Reply 1B deleted from MRC ACJL.
ISAC Reply 1C deleted from MRC ACJL.
ISAC Reply 1D deleted from MRC ACJL.
ISAC Reply 1E deleted from MRC ACJL.
ISAC Reply 1X deleted from MRC ACJL.
ISAC Reply 1Z deleted from MRC ACJL.
ISAC Reply 1B deleted from MRC ACJL.
ISAC Reply 1C deleted from MRC ACJL.
ISAC Reply 3AEE added to MRC AHRX.
ISAC Reply 3CNJ added to MRC AHRX.
ISAC Reply 3CNK added to MRC AHRX.
ISAC Reply 3HOU added to MRC AHRX.
ISAC Reply 1A deleted from MRC AHRX.
ISAC Reply 1B deleted from MRC AHRX.
ISAC Reply 1C deleted from MRC AHRX.
ISAC Reply 1D deleted from MRC AHRX.
ISAC Reply 1E deleted from MRC AHRX.
ISAC Reply 1F deleted from MRC AHRX.
ISAC Reply 1X deleted from MRC AHRX.
ISAC Reply 1Z deleted from MRC AHRX.
ISAC Reply 3AEE added to MRC AHRW.
ISAC Reply 3CNJ added to MRC AHRW.
ISAC Reply 3CNK added to MRC AHRW.
ISAC Reply 3HOU added to MRC AHRW.
ISAC Reply 1A deleted from MRC AHRW.
ISAC Reply 1B deleted from MRC AHRW.
ISAC Reply 1C deleted from MRC AHRW.
ISAC Reply 1D deleted from MRC AHRW.
ISAC Reply 1E deleted from MRC AHRW.
ISAC Reply 1F deleted from MRC AHRW.
ISAC Reply 1X deleted from MRC AHRW.
ISAC Reply 1Z deleted from MRC AHRW.
ISAC Reply 3AEE added to MRC AKMG.
ISAC Reply 3CSM added to MRC AKMG.
ISAC Reply 3CSN added to MRC AKMG.
ISAC Reply 3CSS added to MRC AKMG.
ISAC Reply 3CTF added to MRC AKMG.
ISAC Reply 3CTG added to MRC AKMG.
ISAC Reply 3HOU added to MRC AKMG.
ISAC Reply 1A deleted from MRC AKMG.
ISAC Reply 1B deleted from MRC AKMG.
ISAC Reply 1C deleted from MRC AKMG.
ISAC Reply 1D deleted from MRC AKMG.
ISAC Reply 1E deleted from MRC AKMG.
ISAC Reply 1F deleted from MRC AKMG.
ISAC Reply 1X deleted from MRC AKMG.
ISAC Reply 1Z deleted from MRC AKMG.
ISAC Reply 1A deleted from MRC AKMG.
ISAC Reply 1B deleted from MRC AKMG.
ISAC Reply 1C deleted from MRC AKMG.
ISAC Reply 1D deleted from MRC AKMG.
ISAC Reply 1E deleted from MRC AKMG.
ISAC Reply 1F deleted from MRC AKMG.
ISAC Reply 1X deleted from MRC AKMG.
ISAC Reply 1Z deleted from MRC AKMG.
MRC CTTC has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00186*)
AHRVLTUBING WALL CONSTRUCTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CONSTRUCTION OF THE TUBING WALL.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AHRV3AEELJ10*;AHRV3AEELJ10$LJ1*;AHRV3AEELJ10$$LJ1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CND | FIRST TUBING SEGMENT |
| 3CNE | SECOND TUBING SEGMENT |
| 3CNJ | SINGLE TUBING SEGMENT |
| 3CNK | ALL TUBING SEGMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAP1244 | J1 | SEAMLESS |
| AAP1253 | J10 | BELLOWS |
| AAP1245 | J2 | LAMINATED |
| AAP1246 | J3 | SPIRAL SEAM |
| AAP1247 | J4 | STRAIGHT SEAM |
| AAP1248 | J5 | INTERLOCKED |
| AAP1249 | J6 | CONVOLUTE |
| AAP1250 | J7 | NULL-POINT SEAM |
| AAP1251 | J8 | VERTEBRA |
| AAP1252 | J9 | CORRUGATED |
AHSFAFLANGE QUANTITY
THE NUMBER OF FLANGES PROVIDED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AHSFA10*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3COBDCU0074*;MATT3COBDCU0074$DPCB000*;MATT3COBDCU0074$$DPCB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CND | FIRST TUBING SEGMENT |
| 3CNJ | SINGLE TUBING SEGMENT |
| 3CNK | ALL TUBING SEGMENT |
| 3CNZ | FIRST TUBING SEGMENT AND FLANGE |
| 3COB | FIRST FLANGE |
| 3COC | FIRST COUPLING |
| 3COE | FIRST VANE |
| 3COF | SECOND TUBING SEGMENT AND FLANGE |
| 3COH | SECOND FLANGE |
| 3COI | SECOND COUPLING |
| 3CPA | SINGLE TUBING SEGMENT AND FLANGE |
| 3CPB | SINGLE TUBING JACKET |
| 3CPC | SINGLE FLANGE |
| 3CPD | SINGLE COUPLING |
| 3CPE | SINGLE SEAL |
| 3CPG | ALL TUBING SEGMENT AND FLANGE |
| 3CPH | ALL TUBING JACKET |
| 3CPI | ALL FLANGE |
| 3CPJ | ALL COUPLING |
| 3CPK | ALL SEAL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2018 | ALUMINUM ALLOY 2018 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2025 | ALUMINUM ALLOY 2025 |
| AL2218 | ALUMINUM ALLOY 2218 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL2618 | ALUMINUM ALLOY 2618 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0051 | ALUMINUM ALLOY 357.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0054 | ALUMINUM ALLOY 383.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL4032 | ALUMINUM ALLOY 4032 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL0044 | ALUMINUM ALLOY 443.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0050 | ALUMINUM ALLOY 518.0 |
| AL5454 | ALUMINUM ALLOY 5454 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL6066 | ALUMINUM ALLOY 6066 |
| AL6151 | ALUMINUM ALLOY 6151 |
| AL7049 | ALUMINUM ALLOY 7049 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7076 | ALUMINUM ALLOY 7076 |
| AL7079 | ALUMINUM ALLOY 7079 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0030 | ALUMINUM ALLOY A413.0 |
| BEA000 | BERYLLIUM |
| CDA000 | CADMIUM |
| PPC000 | CARDBOARD |
| CLD000 | CERAMIC |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0059 | COPPER ALLOY 101 |
| CU0249 | COPPER ALLOY 102 |
| CU0282 | COPPER ALLOY 103 |
| CU0286 | COPPER ALLOY 104 |
| CU0287 | COPPER ALLOY 105 |
| CU0288 | COPPER ALLOY 107 |
| CU0283 | COPPER ALLOY 108 |
| CU0063 | COPPER ALLOY 110 |
| CU0289 | COPPER ALLOY 113 |
| CU0290 | COPPER ALLOY 114 |
| CU0291 | COPPER ALLOY 116 |
| CU0247 | COPPER ALLOY 120 |
| CU0248 | COPPER ALLOY 122 |
| CU0292 | COPPER ALLOY 123 |
| CU0278 | COPPER ALLOY 125 |
| CU0324 | COPPER ALLOY 127 |
| CU0326 | COPPER ALLOY 128 |
| CU0315 | COPPER ALLOY 130 |
| CU0293 | COPPER ALLOY 141-CANCELED |
| CU0279 | COPPER ALLOY 142 |
| CU0281 | COPPER ALLOY 145 |
| CU0284 | COPPER ALLOY 147 |
| CU0285 | COPPER ALLOY 162 |
| CU0297 | COPPER ALLOY 165 |
| CU0068 | COPPER ALLOY 170 |
| CU0069 | COPPER ALLOY 172 |
| CU0233 | COPPER ALLOY 173 |
| CU0265 | COPPER ALLOY 175 |
| CU0338 | COPPER ALLOY 182 |
| CU0317 | COPPER ALLOY 184 |
| CU0318 | COPPER ALLOY 185 |
| CU0280 | COPPER ALLOY 187 |
| CU0263 | COPPER ALLOY 210 |
| CU0264 | COPPER ALLOY 220 |
| CU0074 | COPPER ALLOY 230 |
| CU0076 | COPPER ALLOY 240 |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0314 | COPPER ALLOY 314 |
| CU0316 | COPPER ALLOY 316 |
| CU0320 | COPPER ALLOY 320 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0092 | COPPER ALLOY 377 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| CU0298 | COPPER ALLOY 502 |
| CU0299 | COPPER ALLOY 507 |
| CU0300 | COPPER ALLOY 508 |
| CU0103 | COPPER ALLOY 510 |
| CU0104 | COPPER ALLOY 511 |
| CU0105 | COPPER ALLOY 521 |
| CU0106 | COPPER ALLOY 524 |
| CU0107 | COPPER ALLOY 532-CANCELED |
| CU0108 | COPPER ALLOY 534 |
| CU0109 | COPPER ALLOY 544 |
| CU0111 | COPPER ALLOY 606 |
| CU0301 | COPPER ALLOY 607 |
| CU0115 | COPPER ALLOY 614 |
| CU0122 | COPPER ALLOY 630 |
| CU0303 | COPPER ALLOY 638 |
| CU0127 | COPPER ALLOY 642 |
| CU0129 | COPPER ALLOY 651 |
| CU0131 | COPPER ALLOY 655 |
| CU0706 | COPPER ALLOY 706 |
| CU0294 | COPPER ALLOY 710 |
| CU0715 | COPPER ALLOY 715 |
| CU0295 | COPPER ALLOY 732 |
| CU0146 | COPPER ALLOY 735 |
| CU0296 | COPPER ALLOY 740 |
| CU0148 | COPPER ALLOY 745 |
| CU0150 | COPPER ALLOY 752 |
| CU0757 | COPPER ALLOY 757 |
| CU0151 | COPPER ALLOY 762 |
| CU0152 | COPPER ALLOY 764 |
| CU0153 | COPPER ALLOY 766 |
| CU0157 | COPPER ALLOY 770 |
| CU0162 | COPPER ALLOY 794 |
| CU0172 | COPPER ALLOY 836 |
| CU0173 | COPPER ALLOY 838 |
| CU0174 | COPPER ALLOY 842 |
| CU0175 | COPPER ALLOY 844 |
| CU0178 | COPPER ALLOY 854 |
| CU0183 | COPPER ALLOY 863 |
| CU0185 | COPPER ALLOY 865 |
| CU0195 | COPPER ALLOY 903 |
| CU0196 | COPPER ALLOY 905 |
| CU0198 | COPPER ALLOY 910 |
| CU0202 | COPPER ALLOY 922 |
| CU0203 | COPPER ALLOY 923 |
| CU0206 | COPPER ALLOY 932 |
| CU0207 | COPPER ALLOY 934 |
| CU0208 | COPPER ALLOY 935 |
| CU0210 | COPPER ALLOY 938 |
| CU0212 | COPPER ALLOY 940 |
| CU0214 | COPPER ALLOY 943 |
| CUD000 | COPPER GRAPHITE |
| GSA000 | GLASS |
| AUA000 | GOLD |
| AUB000 | GOLD ALLOY |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| MGB000 | MAGNESIUM ALLOY |
| MTC000 | METAL |
| MTG000 | METAL FERROUS |
| MTJ000 | METAL NONFERROUS/D |
| AYA000 | MICA |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| NLC000 | NICKEL SILVER |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCC000 | PLASTIC ACRYLATE |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCE000 | PLASTIC ALKYD |
| PCF000 | PLASTIC ALLYL |
| PCAAM0 | PLASTIC AMINO |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCAAN0 | PLASTIC CELLULOSE PROPIONATE |
| PCAAZ0 | PLASTIC CHLORINATED POLYESTER |
| PCAAQ0 | PLASTIC CHLOROTRIFLUOROETHYLENE |
| PCBP00 | PLASTIC DIALLYL ISOPHTHALATE |
| PCG000 | PLASTIC DIALLYL PHTHALATE |
| PCAAK0 | PLASTIC DIALLYL PHTHALATE MINERAL FILLED |
| PCH000 | PLASTIC EPOXY |
| PCBY00 | PLASTIC ETHYL CELLULOSE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCAAE0 | PLASTIC FLUOROSILICONE |
| PCAAR0 | PLASTIC FURANE |
| PCAAS0 | PLASTIC ISOCYANATE |
| PCJ000 | PLASTIC MELAMINE |
| PCAAJ0 | PLASTIC MELAMINE MINERAL FILLED |
| PCBB00 | PLASTIC METHACRYLATE |
| PCAAG0 | PLASTIC MINERAL FILLED |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCAAH0 | PLASTIC PHENOLIC MINERAL FILLED |
| PCBK00 | PLASTIC PHENOXY |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCS000 | PLASTIC POLYCHLOROFLUOROETHYLENE |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAAY0 | PLASTIC POLYHYDROXY |
| PCBE00 | PLASTIC POLYPHENYLENE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAG00 | PLASTIC POLYTRIFLUOROCHLOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAAT0 | PLASTIC POLYVINYL ALCOHOL |
| PCBT00 | PLASTIC POLYVINYL FLUORIDE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAY00 | PLASTIC PYROXYLIN |
| PCAK00 | PLASTIC SILICONE |
| PCAAL0 | PLASTIC SILICONE MINERAL FILLED |
| PCBC00 | PLASTIC STYRENE |
| PCAAW0 | PLASTIC STYRENE ACRYLONITRILE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAL00 | PLASTIC UREA |
| PCAAX0 | PLASTIC UREA-FORMALDEHYDE |
| PCAAA0 | PLASTIC VINYL ACETATE |
| CLB000 | PORCELAIN |
| SLG000 | QUARTZ |
| RCE000 | RUBBER |
| RCF000 | RUBBER BUNA N |
| RCG000 | RUBBER BUNA S |
| RCD000 | RUBBER CHLOROPRENE |
| RCS000 | RUBBER FLUOROSILICONE |
| RCA000 | RUBBER NATURAL |
| RCJ000 | RUBBER POLYBUTADIENE |
| RCL000 | RUBBER POLYETHYLENE |
| RCP000 | RUBBER POLYISOBUTYLENE |
| RCC000 | RUBBER SILICONE |
| RCB000 | RUBBER SYNTHETIC |
| AGA000 | SILVER |
| AGF000 | SILVER ALLOY |
| STA000 | STEEL |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1024 | STEEL COMP 1024 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1027 | STEEL COMP 1027 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1031 | STEEL COMP 1031 |
| ST1033 | STEEL COMP 1033 |
| ST1035 | STEEL COMP 1035 |
| ST1036 | STEEL COMP 1036 |
| ST1037 | STEEL COMP 1037 |
| ST1038 | STEEL COMP 1038 |
| ST1039 | STEEL COMP 1039 |
| ST1040 | STEEL COMP 1040 |
| ST1041 | STEEL COMP 1041 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1045 | STEEL COMP 1045 |
| ST1046 | STEEL COMP 1046 |
| ST1049 | STEEL COMP 1049 |
| ST1050 | STEEL COMP 1050 |
| ST1051 | STEEL COMP 1051 |
| ST1052 | STEEL COMP 1052 |
| ST1053 | STEEL COMP 1053 |
| ST1055 | STEEL COMP 1055 |
| ST1059 | STEEL COMP 1059 |
| ST1060 | STEEL COMP 1060 |
| ST1061 | STEEL COMP 1061 |
| ST1064 | STEEL COMP 1064 |
| ST1065 | STEEL COMP 1065 |
| ST1069 | STEEL COMP 1069 |
| ST1070 | STEEL COMP 1070 |
| ST1072 | STEEL COMP 1072 |
| ST1074 | STEEL COMP 1074 |
| ST1075 | STEEL COMP 1075 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1085 | STEEL COMP 1085 |
| ST1086 | STEEL COMP 1086 |
| ST1090 | STEEL COMP 1090 |
| ST1095 | STEEL COMP 1095 |
| ST1108 | STEEL COMP 1108 |
| ST1109 | STEEL COMP 1109 |
| ST1110 | STEEL COMP 1110 |
| ST1112 | STEEL COMP 1112 |
| ST1113 | STEEL COMP 1113 |
| ST1115 | STEEL COMP 1115 |
| ST1116 | STEEL COMP 1116 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1119 | STEEL COMP 1119 |
| ST1120 | STEEL COMP 1120 |
| ST1126 | STEEL COMP 1126 |
| ST1132 | STEEL COMP 1132 |
| ST1137 | STEEL COMP 1137 |
| ST1138 | STEEL COMP 1138 |
| ST1139 | STEEL COMP 1139 |
| ST1140 | STEEL COMP 1140 |
| ST1141 | STEEL COMP 1141 |
| ST1144 | STEEL COMP 1144 |
| ST1145 | STEEL COMP 1145 |
| ST1146 | STEEL COMP 1146 |
| ST1151 | STEEL COMP 1151 |
| ST1211 | STEEL COMP 1211 |
| ST1212 | STEEL COMP 1212 |
| ST1213 | STEEL COMP 1213 |
| ST1215 | STEEL COMP 1215 |
| ST0063 | STEEL COMP 12L14 |
| ST1330 | STEEL COMP 1330 |
| ST1345 | STEEL COMP 1345 |
| ST0071 | STEEL COMP 17-4PH |
| ST0201 | STEEL COMP 201 |
| ST0202 | STEEL COMP 202 |
| ST0159 | STEEL COMP 203EZ |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0180 | STEEL COMP 302B |
| ST0303 | STEEL COMP 303 |
| ST0251 | STEEL COMP 303 PLUS CB |
| ST0166 | STEEL COMP 303 PLUS X |
| ST0157 | STEEL COMP 303CU |
| ST0077 | STEEL COMP 303F |
| ST0250 | STEEL COMP 303F PLUS CB |
| ST0165 | STEEL COMP 303MA |
| ST0158 | STEEL COMP 303PB |
| ST0078 | STEEL COMP 303S |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0305 | STEEL COMP 305 |
| ST0152 | STEEL COMP 308 |
| ST0309 | STEEL COMP 309 |
| ST0153 | STEEL COMP 309S |
| ST0310 | STEEL COMP 310 |
| ST0154 | STEEL COMP 310S |
| ST0155 | STEEL COMP 314 |
| ST0316 | STEEL COMP 316 |
| ST0354 | STEEL COMP 316F |
| ST0082 | STEEL COMP 316L |
| ST0317 | STEEL COMP 317 |
| ST0254 | STEEL COMP 317L |
| ST0321 | STEEL COMP 321 |
| ST0322 | STEEL COMP 322 |
| ST0323 | STEEL COMP 323 |
| ST0324 | STEEL COMP 324 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0384 | STEEL COMP 384 |
| ST0385 | STEEL COMP 385 |
| ST0403 | STEEL COMP 403 |
| ST0405 | STEEL COMP 405 |
| ST0410 | STEEL COMP 410 |
| ST4130 | STEEL COMP 4130 |
| ST0414 | STEEL COMP 414 |
| ST4140 | STEEL COMP 4140 |
| ST0416 | STEEL COMP 416 |
| ST0255 | STEEL COMP 416 PLUS X |
| ST0099 | STEEL COMP 416SE |
| ST0420 | STEEL COMP 420 |
| ST0100 | STEEL COMP 420F |
| ST0284 | STEEL COMP 420FSE |
| ST0430 | STEEL COMP 430 |
| ST0101 | STEEL COMP 430F |
| ST0172 | STEEL COMP 430FSE |
| ST0431 | STEEL COMP 431 |
| ST4340 | STEEL COMP 4340 |
| ST0105 | STEEL COMP 440A |
| ST0106 | STEEL COMP 440B |
| ST0107 | STEEL COMP 440C |
| ST0108 | STEEL COMP 440F |
| ST0285 | STEEL COMP 440FSE |
| ST0446 | STEEL COMP 446 |
| ST4620 | STEEL COMP 4620 |
| ST6150 | STEEL COMP 6150 |
| ST0129 | STEEL COMP 6150H |
| ST8620 | STEEL COMP 8620 |
| ST0014 | STEEL COMP B1111 |
| ST0015 | STEEL COMP B1112 |
| ST0016 | STEEL COMP B1113 |
| ST0298 | STEEL COMP W110 |
| STB000 | STEEL CORROSION RESISTING |
| TLA000 | TELLURIUM |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3CRYDPCA000*;SFTT3CRYDPCA000$DALA000*;SFTT3CRYDPCA000$$DALA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CPM | FIRST TUBING SEGMENT INSIDE SURFACES |
| 3CPP | FIRST TUBING SEGMENT AND FLANGE INSIDE SURFACES |
| 3CPS | FIRST FLANGE INSIDE SURFACES |
| 3CPT | FIRST FLANGE OUTSIDE SURFACES |
| 3CPY | SECOND TUBING SEGMENT INSIDE SURFACES |
| 3CQB | SECOND TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| 3CQD | SECOND FLANGE INSIDE SURFACES |
| 3CQE | SECOND FLANGE OUTSIDE SURFACES |
| 3CRA | SINGLE TUBING SEGMENT INSIDE SURFACES |
| 3CRB | SINGLE TUBING SEGMENT OUTSIDE SURFACES |
| 3CRC | SINGLE TUBING SEGMENT ALL SURFACES |
| 3CRD | SINGLE TUBING SEGMENT AND FLANGE INSIDE SURFACES |
| 3CRE | SINGLE TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| 3CRF | SINGLE TUBING SEGMENT AND FLANGE ALL SURFACES |
| 3CRG | SINGLE FLANGE INSIDE SURFACES |
| 3CRH | SINGLE FLANGE OUTSIDE SURFACES |
| 3CRI | SINGLE FLANGE ALL SURFACES |
| 3CRK | SINGLE COUPLING OUTSIDE SURFACES |
| 3CRL | SINGLE COUPLING ALL SURFACES |
| 3CRR | ALL TUBING SEGMENT INSIDE SURFACES |
| 3CRS | ALL TUBING SEGMENT OUTSIDE SURFACES |
| 3CRT | ALL TUBING SEGMENT ALL SURFACES |
| 3CRU | ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES |
| 3CRV | ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| 3CRW | ALL TUBING SEGMENT AND FLANGE ALL SURFACES |
| 3CRX | ALL FLANGE INSIDE SURFACES |
| 3CRY | ALL FLANGE OUTSIDE SURFACES |
| 3CRZ | ALL FLANGE ALL SURFACES |
| 3CSB | ALL COUPLING OUTSIDE SURFACES |
| 3CSC | ALL COUPLING ALL SURFACES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IFO | ALL VANE ALL SURFACES |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ALA000 | ALUMINUM ALLOY |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CNA000 | CARBON |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCB000 | DICHROMATE POTASSIUM |
| DCD000 | DICHROMATE SODIUM |
| DCC000 | DICHROMATE ZINC |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| CLD000 | ENAMEL PORCELAIN |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| IRA000 | IRIDIUM |
| LQA000 | LACQUER |
| PBA000 | LEAD |
| NLA000 | NICKEL |
| NLC000 | NICKEL ALLOY |
| NLB000 | NICKEL SILVER |
| XXB000 | OXIDE |
| XXF000 | OXIDE ALUMINUM |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PDA000 | PALLADIUM |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PCA000 | PLASTIC |
| PCK000 | PLASTIC ACRYLIC |
| PCN000 | PLASTIC DIALLYL PHTHALATE |
| PCL000 | PLASTIC MELAMINE |
| PCM000 | PLASTIC PHENOLIC |
| PCJ000 | PLASTIC POLYSTYRENE |
| PCP000 | PLASTIC POLYSULFONE |
| PCH000 | PLASTIC VINYL |
| PTA000 | PLATINUM |
| PTB000 | PLATINUM ALLOY |
| CLC000 | PORCELAIN |
| PRA000 | PRIMER |
| RHA000 | RHODIUM |
| RCA000 | RUBBER |
| AGA000 | SILVER |
| AGB000 | SILVER ALLOY |
| SRA000 | SOLDER |
| SNA000 | TIN |
| TNA000 | TUNGSTEN |
| TNB000 | TUNGSTEN ALLOY |
| VAA000 | VARNISH |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) D1, D2, D3, D4 OR D5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BBPN)
IF STYLE/REPLY CODE(s) D6, D7 OR D8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BBPN and CSRQ and CWBQ)
IF STYLE/REPLY CODE(s) D9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BBPN and BBPQ and CWBQ and CXBH)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLD7)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAP1218 | D1 | WAVEGUIDE TO WAVEGUIDE |
| AAP1219 | D2 | WAVEGUIDE TO WAVEGUIDE |
| AAP1220 | D3 | WAVEGUIDE TO COAXIAL |
| AAP1221 | D4 | WAVEGUIDE TO COAXIAL |
| AAP1222 | D5 | WAVEGUIDE TO COAXIAL |
| AAP1223 | D6 | WAVEGUIDE TO COAXIAL |
| AAP1224 | D7 | WAVEGUIDE TO COAXIAL |
| AAP1225 | D8 | WAVEGUIDE TO COAXIAL |
| AAP1226 | D9 | WAVEGUIDE TO COAXIAL |
BBPN*JADAPTER LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBPNJFA2.0*;BBPNJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BBPQ*JADAPTER HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBPQJFC2.0*;BBPQJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSRQ*JADAPTER DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSRQJAA2.0*;CSRQJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWBQ*JADAPTER OVERALL HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWBQJFA2.0*;CWBQJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CXBH*JADAPTER OVERALL WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXBHJAB2.0*;CXBHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) A1, A2, A3, A4, A5, A6, A14, A16, A19, A21 OR A23 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CQHN and CRFH and CRLB and CSFC)
IF STYLE/REPLY CODE(s) A7, A9 OR A11 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CQHJ and CSGM)
IF STYLE/REPLY CODE(s) A8, A10, A12 OR A18 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CRFH and CRLB and CSGM)
IF STYLE/REPLY CODE(s) A13, A15, A17, A20, A22 OR A24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CQHJ and CQHN and CSFC)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLA12)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAP1150 | A1 | INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| AAP1159 | A10 | INTERNAL, RECTANGULAR SINGLE RIDGED EXTERNAL, ROUND |
| AAP1160 | A11 | INTERNAL, ROUND DOUBLE RIDGED EXTERNAL, ROUND |
| AAP1161 | A12 | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, ROUND |
| AAP1162 | A13 | INTERNAL, ROUND EXTERNAL, RECTANGULAR |
| AAP1163 | A14 | INTERNAL, ELLIPTICAL EXTERNAL, ELLIPTICAL |
| AAP1164 | A15 | INTERNAL, ROUND SINGLE RIDGED EXTERNAL, RECTANGULAR |
| AAP1165 | A16 | INTERNAL, ELLIPTICAL EXTERNAL, RECTANGULAR |
| AAP1166 | A17 | INTERNAL, ROUND DOUBLE RIDGED EXTERNAL, RECTANGULAR |
| AAP1167 | A18 | INTERNAL, ELLIPTICAL EXTERNAL, ROUND |
| AAP1168 | A19 | INTERNAL, RECTANGULAR EXTERNAL, ELLIPTICAL |
| AAP1151 | A2 | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, RECTANGULAR |
| AAP1169 | A20 | INTERNAL, ROUND EXTERNAL, ELLIPTICAL |
| AAP1170 | A21 | INTERNAL, RECTANGULAR SINGLE RIDGED EXTERNAL, ELLIPTICAL |
| AAP1171 | A22 | INTERNAL, ROUND SINGLE RIDGED EXTERNAL, ELLIPTICAL |
| AAP1172 | A23 | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, ELLIPTICAL |
| AAP1173 | A24 | INTERNAL, ROUND DOUBLE RIDGED EXTERNAL, ELLIPTICAL |
| AAP1152 | A3 | INTERNAL, RECTANGULAR SINGLE RIDGED EXTERNAL, RECTANGULAR |
| AAP1153 | A4 | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, RECTANGULAR SINGLE INDENTED |
| AAP1154 | A5 | INTERNAL, RECTANGULAR SINGLE RIDGED EXTERNAL, RECTANGULAR SINGLE INDENTED |
| AAP1155 | A6 | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, RECTANGULAR DOUBLE INDENTED |
| AAP1156 | A7 | INTERNAL, ROUND EXTERNAL, ROUND |
| AAP1157 | A8 | INTERNAL, RECTANGULAR EXTERNAL, ROUND |
| AAP1158 | A9 | INTERNAL, ROUND SINGLE RIDGED EXTERNAL, ROUND |
CQHJ*JWAVEGUIDE INSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQHJJFB2.0*;CQHJJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQHN*JWAVEGUIDE OUTSIDE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQHNJFB2.0*;CQHNJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRFH*JWAVEGUIDE INSIDE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRFHJAA2.0*;CRFHJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRLB*JWAVEGUIDE INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRLBJFC2.0*;CRLBJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSFC*JWAVEGUIDE OUTSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSFCJAC2.0*;CSFCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSGM*JWAVEGUIDE OUTSIDE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSGMJAB2.0*;CSGMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) C1 WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (AHTB and AHTC and AHTD)
IF STYLE/REPLY CODE(s) C2, C7, C8, C9, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C27, C28, C22A, C22B OR C22C WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (AHTA and AHTD and AHSX and AHSY and AHSZ)
IF STYLE/REPLY CODE(s) C3 WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (AHTA and AHTB and AHTD and AHSX and AHSY and AHSZ)
IF STYLE/REPLY CODE(s) C4, C5, C6, C10, C11, C23, C24, C25 OR C26 WERE ENTERED FOR MRC CTCJ, YOU MUST ANSWER MRC (AHTC and AHTD and AHSX and AHSY)
CTCJLFLANGE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE FLANGE.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CTCJ3COHLC22A*;CTCJ3COHLC22A$LC13*;CTCJ3COHLC22A$$LC13*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAP1187 | C1 | CHOKE TYPE |
| AAP1196 | C10 | CONTACT TYPE |
| AAP1197 | C11 | CONTACT TYPE |
| AAP1198 | C12 | CONTACT, SINGLE RIDGE TYPE |
| AAP1199 | C13 | CONTACT, SINGLE RIDGE TYPE |
| AAP1200 | C14 | CONTACT, SINGLE RIDGE TYPE |
| AAP1201 | C15 | CONTACT, DOUBLE RIDGE TYPE |
| AAP1202 | C16 | CONTACT, DOUBLE RIDGE TYPE |
| AAP1203 | C17 | CONTACT, DOUBLE RIDGE TYPE |
| AAP1204 | C18 | CONTACT, DOUBLE RIDGE TYPE |
| AAP1205 | C19 | CONTACT, FOR SINGLE RIDGE WAVEGUIDE |
| AAP1188 | C2 | CHOKE TYPE |
| AAP1206 | C20 | CONTACT, FOR SINGLE RIDGE WAVEGUIDE |
| AAP1207 | C21 | CONTACT, FOR DOUBLE RIDGE WAVEGUIDE |
| AAP1208 | C22 | CONTACT, FOR DOUBLE RIDGE WAVEGUIDE |
| AAP1215 | C22A | CONTACT, DOUBLE RIDGE TYPE |
| AAP1216 | C22B | CONTACT, DOUBLE RIDGE TYPE |
| AAP1217 | C22C | CONTACT, DOUBLE RIDGE TYPE |
| AAP1209 | C23 | COVER TYPE |
| AAP1210 | C24 | COVER TYPE |
| AAP1211 | C25 | COVER TYPE |
| AAP1212 | C26 | COVER TYPE |
| AAP1213 | C27 | COVER TYPE |
| AAP1214 | C28 | COVER TYPE |
| AAP1189 | C3 | CHOKE TYPE |
| AAP1190 | C4 | CHOKE TYPE |
| AAP1191 | C5 | CHOKE TYPE |
| AAP1192 | C6 | CHOKE TYPE |
| AAP1193 | C7 | CONTACT TYPE |
| AAP1194 | C8 | CONTACT TYPE |
| AAP1195 | C9 | CONTACT TYPE |
AHSX*JFLANGE INSIDE WIDTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHSX3AEEJAA2.0*;AHSX3AEEJAA2.0$JAA2.0*;AHSX3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHSY*JFLANGE INSIDE HEIGHT
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHSY3COBJAC2.0*;AHSY3COBJAC2.0$JAC2.0*;AHSY3COBJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHSZ*JFLANGE OUTSIDE WIDTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHSZ3AEEJAB2.0*;AHSZ3AEEJAB2.0$JAB2.0*;AHSZ3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHTA*JFLANGE OUTSIDE HEIGHT
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHTA3AEEJAC2.0*;AHTA3AEEJAC2.0$JAC2.0*;AHTA3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHTB*JFLANGE INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHTB3COHJFC2.0*;AHTB3COHJFC2.0$JFC2.0*;AHTB3COHJFC2.0$$JFC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHTC*JFLANGE OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A FLANGE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHTC3COBJAA2.0*;AHTC3COBJAA2.0$JAA2.0*;AHTC3COBJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHTD*JFLANGE DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS ON THE FLANGE,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHTD3AEEJAC2.0*;AHTD3AEEJAC2.0$JAC2.0*;AHTD3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3COB | FIRST FLANGE |
| 3COH | SECOND FLANGE |
| 3COL | THIRD FLANGE |
| 3CPC | SINGLE FLANGE |
| 3CSH | ALL FLANGES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) AET, AHF, AMA, AZG OR BTX WERE ENTERED FOR MRC CSQT, YOU MUST ANSWER MRC (THSD)
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC CSQT, YOU MUST ANSWER MRC (AHTN)
CSQTJFLANGE CONNECTING FACILITY AND QUANTITY
THE TYPE AND NUMBER OF FACILITIES BY WHICH THE FLANGE IS CONNECTED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(CSQT3CSSJAHF2*;CSQT3CSSJAHF2$$JAHF3*;CSQT3CSSJAHF2$JAHF2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSI | FIRST FLANGE FIRST CONNECTION FACILITY |
| 3CSJ | FIRST FLANGE SECOND CONNECTION FACILITY |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSO | SECOND FLANGE FIRST CONNECTION FACILITY |
| 3CSP | SECOND FLANGE SECOND CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTD | SINGLE FLANGE THIRD CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTH | ALL FLANGES FIRST CONNECTION FACILITY |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTJ | ALL FLANGES THIRD CONNECTION FACILITY |
| 3CTL | ALL FLANGES SINGLE CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IFP | SINGLE FLANGE SIXTH CONNECTION FACILITY |
| Table 2 |
| Reply Code (AM39) | Reply |
| AMA | CAPTIVE SCREWS |
| ACX | CLAMP RING |
| BTX | COUPLING NUT |
| BMX | QUICK DISCONNECT FASTENERS |
| AHF | THREADED HOLE |
| AET | THREADED STUD |
| AZG | THUMB SCREW |
| ACQ | UNTHREADED HOLE |
| AEW | UNTHREADED STUD |
AHTN*JFLANGE CONNECTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A FLANGE CONNECTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHTN3CTFJAB2.0*;AHTN3CTFJAB2.0$JAB2.0*;AHTN3CTFJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSI | FIRST FLANGE FIRST CONNECTION FACILITY |
| 3CSJ | FIRST FLANGE SECOND CONNECTION FACILITY |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSP | SECOND FLANGE SECOND CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CST | THIRD FLANGE THIRD CONNECTION FACILITY |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTD | SINGLE FLANGE THIRD CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTH | ALL FLANGES FIRST CONNECTION FACILITY |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTJ | ALL FLANGES THIRD CONNECTION FACILITY |
| 3CTL | ALL FLANGES SINGLE CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and CMLP and AAJF)
IF STYLE/REPLY CODE(s) JC, JE, JF, NC, NE OR NF WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD and AAJF)
IF STYLE/REPLY CODE(s) NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD) or (CMLP and AAJF)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3CTFDJF*;THSD3CTFDJF$DNE*;THSD3CTFDJF$$DNE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSI | FIRST FLANGE FIRST CONNECTION FACILITY |
| 3CSJ | FIRST FLANGE SECOND CONNECTION FACILITY |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSO | SECOND FLANGE FIRST CONNECTION FACILITY |
| 3CSP | SECOND FLANGE SECOND CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTD | SINGLE FLANGE THIRD CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTL | ALL FLANGES SINGLE CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| SM | ISO M |
| SS | ISO S |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3CTGJA2.0*;CQJX3CTGJA2.0$JA2.0*;CQJX3CTGJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSI | FIRST FLANGE FIRST CONNECTION FACILITY |
| 3CSJ | FIRST FLANGE SECOND CONNECTION FACILITY |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSO | SECOND FLANGE FIRST CONNECTION FACILITY |
| 3CSP | SECOND FLANGE SECOND CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTD | SINGLE FLANGE THIRD CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTL | ALL FLANGES SINGLE CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3CTBAO8)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSI | FIRST FLANGE FIRST CONNECTION FACILITY |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSO | SECOND FLANGE FIRST CONNECTION FACILITY |
| 3CSP | SECOND FLANGE SECOND CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTD | SINGLE FLANGE THIRD CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTL | ALL FLANGES SINGLE CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3AEEAA5)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSO | SECOND FLANGE FIRST CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3CTBDAAG*;AAJF3CTBDAAG$DAAL*;AAJF3CTBDAAG$$DAAL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSI | FIRST FLANGE FIRST CONNECTION FACILITY |
| 3CSJ | FIRST FLANGE SECOND CONNECTION FACILITY |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSO | SECOND FLANGE FIRST CONNECTION FACILITY |
| 3CSP | SECOND FLANGE SECOND CONNECTION FACILITY |
| 3CSR | SECOND FLANGE SINGLE CONNECTION FACILITY |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CSU | THIRD FLANGE SINGLE CONNECTION FACILITY |
| 3CTB | SINGLE FLANGE FIRST CONNECTION FACILITY |
| 3CTC | SINGLE FLANGE SECOND CONNECTION FACILITY |
| 3CTD | SINGLE FLANGE THIRD CONNECTION FACILITY |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3CTH | ALL FLANGES FIRST CONNECTION FACILITY |
| 3CTI | ALL FLANGES SECOND CONNECTION FACILITY |
| 3CTL | ALL FLANGES SINGLE CONNECTION FACILITY |
| 3CTM | ALL FLANGES ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
ACJL*BBEND ANGLE IN DEG
THE ANGULAR MEASUREMENT BY WHICH ONE PART/SECTION OF A RIGID ITEM DEVIATES FROM A STRAIGHT LINE PROJECTION OF AN ADJACENT PART/SECTION,EXPRESSED IN DEGREES.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(ACJL3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CNM | FIRST BEND H-PLANE |
| 3CNO | SECOND BEND H-PLANE |
| 3CNV | SINGLE BEND E-PLANE |
| 3CNW | SINGLE BEND H-PLANE |
| 3CNX | ALL BENDS E-PLANE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AHRX*BTUBING TWIST ANGLE IN DEG
THE ANGLE TO WHICH A RIGID TUBING HAS BEEN INTENTIONALLY ROTATED DURING MANUFACTURE OR THE MAXIMUM ANGLE TO WHICH A TWISTABLE TYPE TUBING MAY BE ROTATED,AS MEASURED IN DEGREES OF ANGULAR DIFFERENCE BETWEEN THE PLANE OF A SPECIFIC TRANSVERSE DIMENSION AT ONE EXTREMITY OF THE TUBING AND THE PLANE OF THE SAME DIMENSION AT THE OTHER EXTREMITY.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(AHRX3CNJB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CNJ | SINGLE TUBING SEGMENT |
| 3CNK | ALL TUBING SEGMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AHRW*DTUBING TWIST TYPE
INDICATES THE TYPE OF TWIST AS CHARACTERIZED BY THE METHOD OR MANNER BY WHICH THE ROTATION OF THE CROSS-SECTIONAL AXES OF THE TUBING IS AFFECTED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AHRW3CNJDC*;AHRW3CNJDC$DD*;AHRW3CNJDC$$DD*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CNJ | SINGLE TUBING SEGMENT |
| 3CNK | ALL TUBING SEGMENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF40) | Reply |
| C | STEP TWIST |
| B | STRAIGHT TWIST |
| D | TWISTABLE |
AKMG*JNOMINAL THREAD LENGTH
A NOMINAL MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKMG3CTGJA2.0*;AKMG3CTGJA2.0$JA2.0*;AKMG3CTGJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CSM | FIRST FLANGE SINGLE CONNECTION FACILITY |
| 3CSN | FIRST FLANGE ALL CONNECTION FACILITIES |
| 3CSS | SECOND FLANGE ALL CONNECTION FACILITIES |
| 3CTF | SINGLE FLANGE SINGLE CONNECTION FACILITY |
| 3CTG | SINGLE FLANGE ALL CONNECTION FACILITIES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AHUC*DCOAXIAL CONNECTOR SERIES DESIGNATION
A LETTER OR GROUP OF LETTERS USED TO DESIGNATE THE PARTICULAR COAXIAL CONNECTOR SERIES.
Enter the applicable reply code from the table below
(AHUCDAE)
| Table 1 |
| Reply Code (AF42) | Reply |
| AU | APC-3.5 |
| BU | ASM |
| AH | BN |
| AB | BNC |
| AC | C |
| BS | EIA |
| AD | HN |
| AE | LC |
| AQ | LN |
| AF | LT |
| AJ | N |
| BC | OSM |
| BA | SC |
| BP | SMA |
| AG | TNC |
| BQ | WPM |
AHUD*DCONNECTOR END DESIGN
THE DESIGN OF THE CONNECTOR END.
Enter the applicable reply code from the table below
(AHUDDB)
| Table 1 |
| Reply Code (AB60) | Reply |
| B | FEMALE |
| A | MALE |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGMJG2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| B | BAR |
| C | KILOGRAMS PER SQUARE CENTIMETER GAGE |
| G | POUNDS PER SQUARE INCH GAGE |
AHTX*BINSERTION LOSS IN DECIBELS
THE DIFFERENCE IN THE AMOUNT OF ENERGY AVAILABLE BEFORE AND AFTER THE INSERTION OF AN APPARATUS IN A TRANSMISSION SYSTEM,EXPRESSED IN DECIBELS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AHTXB2.0)
AHTW*BVOLTAGE STANDING WAVE RATIO
THE RATIO OF THE MAXIMUM TO THE MINIMUM AMPLITUDE OF PRESSURE /VOLTAGE/ MEASURED ALONG THE PATH OF THE WAVES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AHTWB2.0)
IF STYLE/REPLY CODE(s) P WERE ENTERED FOR MRC RADC, YOU MUST ANSWER MRC (RADD)
RADC*DRADIOACTIVE CONTENT
AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.
Enter the applicable reply code from the table below
(RADCDP)
| Table 1 |
| Reply Code (AN54) | Reply |
| P | CONTAINS RADIOACTIVE MATERIAL |
RADD*JRADIONUCLIDES DATA
THE NAME AND AMOUNT OF THE RADIONUCLIDE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(RADDJJFAAJT2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| JF | CURIES |
| JH | MICROCURIES |
| JG | MILLICURIES |
| Table 2 |
| Reply Code (AN55) | Reply |
| AAAB | ACTINIUM (89) AC-227 |
| AAAC | ACTINIUM (89) AC-228 |
| AAAD | AMERICIUM (95) AM-241 |
| AAAE | AMERICIUM (95) AM-243 |
| AAAF | ANTIMONY (51) SB-122 |
| AAAG | ANTIMONY (51) SB-124 |
| AAAH | ANTIMONY (51) SB-125 |
| AAAJ | ARGON (18) AR-37 |
| AAAK | ARGON (18) AR-41 |
| AAAL | ARGON (18) AR-41, UNCOMPRESSED |
| AAAM | ARSENIC (33) AS-73 |
| AAAN | ARSENIC (33) AS-74 |
| AAAP | ARSENIC (33) AS-76 |
| AAAQ | ARSENIC (33) AS-77 |
| AAAR | ASTATINE (85) AT-211 |
| AAAS | BARIUM (56) BA-131 |
| AAAT | BARIUM (56) BA-133 |
| AAAW | BARIUM (56) BA-140 |
| AAAX | BERKELIUM (97) BK-249 |
| AAAY | BERYLLIUM (4) BE-7 |
| AAAZ | BISMUTH (83) BI-206 |
| AABA | BISMUTH (83) BI-207 |
| AABB | BISMUTH (83) BI-210 |
| AABC | BISMUTH (83) BI-212 |
| AABD | BROMINE (35) BR-82 |
| AABE | CADMIUM (48) CD-109 |
| AABG | CADMIUM (48) CD-115 |
| AABF | CADMIUM (48) CD-115M |
| AABH | CALCIUM (20) CA-45 |
| AABJ | CALCIUM (20) CA-47 |
| AABK | CALIFORNIUM /98/ CF-249 |
| AABL | CALIFORNIUM /98/ CF-250 |
| AABM | CALIFORNIUM /98/ CF-252 |
| AABN | CARBON (6) C-14 |
| AABP | CERIUM (58) CE-141 |
| AABQ | CERIUM (58) CE-143 |
| AABR | CERIUM (58) CE-144 |
| AABS | CESIUM (55) CS-131 |
| AABW | CESIUM (55) CS-134 |
| AABT | CESIUM (55) CS-134M |
| AABX | CESIUM (55) CS-135 |
| AABY | CESIUM (55) CS-136 |
| AABZ | CESIUM (55) CS-137 |
| AACA | CHLORINE (17) CL-36 |
| AACB | CHLORINE (17) CL-38 |
| AACC | CHROMIUM (24) CR-51 |
| AACD | COBALT (27) CO-56 |
| AACE | COBALT (27) CO-57 |
| AACG | COBALT (27) CO-58 |
| AACF | COBALT (27) CO-58M |
| AACH | COBALT (27) CO-60 |
| AACJ | COPPER (29) CU-64 |
| AACK | CURIUM (96) CM-242 |
| AACL | CURIUM (96) CM-243 |
| AACM | CURIUM (96) CM-244 |
| AACN | CURIUM (96) CM-245 |
| AACP | CURIUM (96) CM-246 |
| AACQ | DYSPROSIUM (66) DY-154 |
| AACR | DYSPROSIUM (66) DY-165 |
| AACS | DYSPROSIUM (66) DY-166 |
| AACT | ERBIUM (68) ER-169 |
| AACW | ERBIUM (68) ER-171 |
| AACX | EUROPIUM (63) EU-150 |
| AACZ | EUROPIUM (63) EU-152 |
| AACY | EUROPIUM (63) EU-152M |
| AADA | EUROPIUM (63) EU-154 |
| AADB | EUROPIUM (63) EU-155 |
| AADC | FLUORINE (9) F-18 |
| AADD | GADOLINIUM (64) GD-153 |
| AADE | GADOLINIUM (64) GD-159 |
| AADF | GALLIUM (31) GA-67 |
| AADG | GALLIUM (31) GA-72 |
| AADH | GERMANIUM (32) GE-71 |
| AADJ | GOLD (79) AU-193 |
| AADK | GOLD (79) AU-194 |
| AADL | GOLD (79) AU-195 |
| AADM | GOLD (79) AU-196 |
| AADN | GOLD (79) AU-198 |
| AADP | GOLD (79) AU-199 |
| AADQ | HAFNIUM (72) HF-181 |
| AADR | HOLMIUM (67) HO-166 |
| AADS | INDIUM (49) IN-113M |
| AADT | INDIUM (49) IN-114M |
| AADX | INDIUM (49) IN-115 |
| AADW | INDIUM (49) IN-115M |
| AADY | IODINE (53) I-124 |
| AADZ | IODINE (53) I-125 |
| AAEA | IODINE (53) I-126 |
| AAEB | IODINE (53) I-129 |
| AAEC | IODINE (53) I-131 |
| AAED | IODINE (53) I-132 |
| AAEE | IODINE (53) I-133 |
| AAEF | IODINE (53) I-134 |
| AAEG | IODINE (53) I-135 |
| AAEH | IRIDIUM (77) IR-190 |
| AAEJ | IRIDIUM (77) IR-192 |
| AAEK | IRIDIUM (77) IR-194 |
| AAEL | IRON (26) FE-55 |
| AAEM | IRON (26) FE-59 |
| AAEQ | KRYPTON (36) KR-85 |
| AAER | KRYPTON (36) KR-85, UNCOMPRESSED |
| AAEN | KRYPTON (36) KR-85M |
| AAEP | KRYPTON (36) KR-85M, UNCOMPRESSED |
| AAES | KRYPTON (36) KR-87 |
| AAET | KRYPTON (36) KR-87, UNCOMPRESSED |
| AAEW | LANTHANUM (57) LA-140 |
| AAEX | LEAD (82) PB-203 |
| AAEY | LEAD (82) PB-210 |
| AAEZ | LEAD (82) PB-212 |
| AAFA | LUTECIUM (71) LU-172 |
| AAFB | LUTECIUM (71) LU-177 |
| AAFC | MAGNESIUM (12) MG-28 |
| AAFD | MANGANESE (25) MN-52 |
| AAFE | MANGANESE (25) MN-54 |
| AAFF | MANGANESE (25) MN-56 |
| AAFH | MERCURY (80) HG-197 |
| AAFG | MERCURY (80) HG-197M |
| AAFJ | MERCURY (80) HG-203 |
| AAFK | MIXED FISSION PRODUCTS MF-P |
| AAFL | MOLYBDENUM (42) MO-99 |
| AAFM | NEODYMIUM (60) ND-147 |
| AAFN | NEODYMIUM (60) ND-149 |
| AAFP | NEPTUNIUM (93) NP-237 |
| AAFQ | NEPTUNIUM (93) NP-239 |
| AAFR | NICKEL (28) NI-56 |
| AAFS | NICKEL (28) NI-59 |
| AAFT | NICKEL (28) NI-63 |
| AAFW | NICKEL (28) NI-65 |
| AAFX | NIOBIUM (41) NB-93M |
| AAFY | NIOBIUM (41) NB-95 |
| AAFZ | NIOBIUM (41) NB-97 |
| AAGA | OSMIUM (76) OS-185 |
| AAGC | OSMIUM (76) OS-191 |
| AAGB | OSMIUM (76) OS-191M |
| AAGD | OSMIUM (76) OS-193 |
| AAGE | PALLADIUM (46) PD-103 |
| AAGF | PALLADIUM (46) PD-109 |
| AAGG | PHOSPHORUS (15) P-32 |
| AAGH | PLATINUM (78) PT-191 |
| AAGJ | PLATINUM (78) PT-193 |
| AAGK | PLATINUM (78) PT-193M |
| AAGM | PLATINUM (78) PT-197 |
| AAGL | PLATINUM (78) PT-197M |
| AAGN | PLUTONIUM (94) PU-238 |
| AAGP | PLUTONIUM (94) PU-239 |
| AAGQ | PLUTONIUM (94) PU-240 |
| AAGR | PLUTONIUM (94) PU-241 |
| AAGS | PLUTONIUM (94) PU-242 |
| AAGT | POLONIUM (84) PO-210 |
| AAGW | POTASSIUM (19) K-42 |
| AAGX | POTASSIUM (19) K-43 |
| AAGY | PRASEODYMIUM (59) PR-142 |
| AAGZ | PRASEODYMIUM (59) PR-143 |
| AAHA | PROMETHIUM (61) PM-147 |
| AAHB | PROMETHIUM (61) PM-149 |
| AAHC | PROTACTINIUM (91) PA-230 |
| AAHD | PROTACTINIUM (91) PA-231 |
| AAHE | PROTACTINIUM (91) PA-233 |
| AAHF | RADIUM (88) RA-223 |
| AAHG | RADIUM (88) RA-224 |
| AAHH | RADIUM (88) RA-226 |
| AAHJ | RADIUM (88) RA-228 |
| AAHK | RADON (86) RN-220 |
| AAHL | RADON (86) RN-222 |
| AAHM | RHENIUM (75) RE-183 |
| AAHN | RHENIUM (75) RE-186 |
| AAHP | RHENIUM (75) RE-187 |
| AAHQ | RHENIUM (75) RE-188 |
| AAHR | RHENIUM (75) RE-NATURAL |
| AAHS | RHODIUM (45) RH-103M |
| AAHT | RHODIUM (45) RH-105 |
| AAHW | RUBIDIUM (37) RB-86 |
| AAHX | RUBIDIUM (37) RB-87 |
| AAHY | RUBIDIUM (37) RB-NATURAL |
| AAJA | RUTHENIUM (44) RU-103 |
| AAJB | RUTHENIUM (44) RU-105 |
| AAJC | RUTHENIUM (44) RU-106 |
| AAHZ | RUTHENIUM (44) RU-97 |
| AAJD | SAMARIUM (62) SM-145 |
| AAJE | SAMARIUM (62) SM-147 |
| AAJF | SAMARIUM (62) SM-151 |
| AAJG | SAMARIUM (62) SM-153 |
| AAJH | SCANDIUM (21) SC-46 |
| AAJJ | SCANDIUM (21) SC-47 |
| AAJK | SCANDIUM (21) SC-48 |
| AAJL | SELENIUM (34) SE-75 |
| AAJM | SILICON (14) SI-31 |
| AAJN | SILVER (47) AG-105 |
| AAJP | SILVER (47) AG-110M |
| AAJQ | SILVER (47) AG-111 |
| AAJR | SODIUM (11) NA-22 |
| AAJS | SODIUM (11) NA-24 |
| AAJW | STRONTIUM (38) SR-85 |
| AAJT | STRONTIUM (38) SR-85M |
| AAJX | STRONTIUM (38) SR-89 |
| AAJY | STRONTIUM (38) SR-90 |
| AAJZ | STRONTIUM (38) SR-91 |
| AAKA | STRONTIUM (38) SR-92 |
| AAKB | SULPHUR (16) S-35 |
| AAKC | TANTALUM (73) TA-182 |
| AAKE | TECHNETIUM (43) TC-96 |
| AAKD | TECHNETIUM (43) TC-96M |
| AAKG | TECHNETIUM (43) TC-97 |
| AAKF | TECHNETIUM (43) TC-97M |
| AAKJ | TECHNETIUM (43) TC-99 |
| AAKH | TECHNETIUM (43) TC-99M |
| AAKK | TELLURIUM (52) TE-125M |
| AAKM | TELLURIUM (52) TE-127 |
| AAKL | TELLURIUM (52) TE-127M |
| AAKP | TELLURIUM (52) TE-129 |
| AAKN | TELLURIUM (52) TE-129M |
| AAKQ | TELLURIUM (52) TE-131M |
| AAKR | TELLURIUM (52) TE-132 |
| AAKS | TERBIUM (65) TB-160 |
| AAKT | THALLIUM (81) TL-200 |
| AAKW | THALLIUM (81) TL-201 |
| AAKX | THALLIUM (81) TL-202 |
| AAKY | THALLIUM (81) TL-204 |
| AAKZ | THORIUM (90) TH-227 |
| AALA | THORIUM (90) TH-228 |
| AALB | THORIUM (90) TH-230 |
| AALC | THORIUM (90) TH-231 |
| AALD | THORIUM (90) TH-232 |
| AALE | THORIUM (90) TH-234 |
| AALF | THORIUM (90) TH-NATURAL |
| AALG | THULIUM (69) TM-168 |
| AALH | THULIUM (69) TM-170 |
| AALJ | THULIUM (69) TM-171 |
| AALK | TIN (50) SN-113 |
| AALL | TIN (50) SN-117M |
| AALM | TIN (50) SN-121 |
| AALN | TIN (50) SN-125 |
| AALP | TRITIUM (1) H-3 |
| AALQ | TRITIUM (1) H-3 AS GAS, LUMINOUS PAINT, OR ADSORBED ON SOLID MATERIAL |
| AALR | TUNGSTEN (74) W-181 |
| AALS | TUNGSTEN (74) W-185 |
| AALT | TUNGSTEN (74) W-187 |
| AALW | URANIUM (92) U-230 |
| AALX | URANIUM (92) U-232 |
| AALY | URANIUM (92) U-233 |
| AALZ | URANIUM (92) U-234 |
| AAMA | URANIUM (92) U-235 |
| AAMB | URANIUM (92) U-236 |
| AAMC | URANIUM (92) U-238 |
| AAMF | URANIUM (92) U-DEPLETED |
| AAME | URANIUM (92) U-ENRICHED |
| AAMD | URANIUM (92) U-NATURAL |
| AAMG | VANADIUM (23) V-48 |
| AAMH | VANADIUM (23) V-49 |
| AAMJ | XENON (54) XE-125 |
| AAMK | XENON (54) XE-131M |
| AAML | XENON (54) XE-131M, UNCOMPRESSED |
| AAMM | XENON (54) XE-133 |
| AAMN | XENON (54) XE-133, UNCOMPRESSED |
| AAMP | XENON (54) XE-135 |
| AAMQ | XENON (54) XE-135, UNCOMPRESSED |
| AAMR | YTTERBIUM (70) YB-175 |
| AAMS | YTTRIUM (39) Y-88 |
| AAMT | YTTRIUM (39) Y-90 |
| AAMX | YTTRIUM (39) Y-91 |
| AAMW | YTTRIUM (39) Y-91M |
| AAMY | YTTRIUM (39) Y-92 |
| AAMZ | YTTRIUM (39) Y-93 |
| AANA | ZINC (30) ZN-65 |
| AANC | ZINC (30) ZN-69 |
| AANB | ZINC (30) ZN-69M |
| AAND | ZIRCONIUM (40) ZR-93 |
| AANE | ZIRCONIUM (40) ZR-95 |
| AANF | ZIRCONIUM (40) ZR-97 |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AHTY*BINPUT IMPEDANCE RATING IN OHMS
THE TOTAL OPPOSITION (RESISTIVE AND REACTIVE) WHICH THE ITEM OFFERS TO THE ADMITTANCE OF AN ENTERING FLOW OF ALTERNATING CURRENT,EXPRESSED IN OHMS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AHTYB2.0)
AHTZ*BOUTPUT IMPEDANCE RATING IN OHMS
THE TOTAL OPPOSITION /RESISTIVE AND REACTIVE/ WHICH THE OUTPUT OF THE ITEM PROVIDES TO MATCH,FOR MAXIMUM TRANSFER OF ENERGY,THE INPUT IMPEDANCE OF ANOTHER ITEM,EXPRESSED IN OHMS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AHTZB2.0)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDPTA000$DAGA000*;PRMTDPTA000$$DAGA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPDA000F2.0*;PMWTJPDA000F2.0$JPDA000F2.0*;PMWTJPDA000F2.0$$JPDA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPDA0002.0*;PMLCJPDA0002.0$JPDA0002.0*;PMLCJPDA0002.0$$JPDA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ027*;HZRDDHAZ052$$DHAZ035*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
| HAZ027 | IRIDIUM |
| HAZ029 | LEAD |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ035 | RADIOACTIVE |
| HAZ055 | RADIUM 223 |
| HAZ056 | RADIUM 224 |
| HAZ057 | RADIUM 226 |
| HAZ058 | RADIUM 228 |
| HAZ052 | ZINC |
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(SHPNAD3)
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.
Enter the alpha-numeric reply with a minimum of one character.
(DENNAQ0)
WLBL*ADOT WARNING LABEL CODE
THE WARNING LABEL CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PACKAGE OR CONTAINMENT DEVICE OFFERED FOR TRANSPORTATION OF A HAZARDOUS MATERIAL WHICH MEETS ONE OR MORE HAZARD CLASS DEFINITIONS IN ACCORDANCE WITH THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE. THIS MRC HAS BEEN DISCONTINUED WITH NO REPLACEMENT - THIS INFORMATION IS NOT CHARACTERISTIC INFORMATION, THIS INFORMATION NEEDS TO BE INPUT IN SEG G OF THE TIR.
Enter the alpha-numeric reply with a minimum of one character.
(WLBLAL8)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information