A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see RELAY (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see RELAY-SWITCH. Excludes:CIRCUIT BREAKER BOX and magneto "breaker" assemblies. See also SWITCH (as modified); and CONTROLLER.
ISAC Reply 3AEE added to MRC CPLM.
ISAC Reply 3CJU added to MRC CPLM.
ISAC Reply 3CJV added to MRC CPLM.
ISAC Reply 3CJW added to MRC CPLM.
ISAC Reply 3CJX added to MRC CPLM.
ISAC Reply 3CJY added to MRC CPLM.
ISAC Reply 3CJZ added to MRC CPLM.
ISAC Reply 3CKA added to MRC CPLM.
ISAC Reply 3CKB added to MRC CPLM.
ISAC Reply 3CKD added to MRC CPLM.
ISAC Reply 3CKF added to MRC CPLM.
ISAC Reply 3CKG added to MRC CPLM.
ISAC Reply 3HOU added to MRC CPLM.
ISAC Reply 1A deleted from MRC CPLM.
ISAC Reply 1B deleted from MRC CPLM.
ISAC Reply 1C deleted from MRC CPLM.
ISAC Reply 1D deleted from MRC CPLM.
ISAC Reply 1E deleted from MRC CPLM.
ISAC Reply 1F deleted from MRC CPLM.
ISAC Reply 1G deleted from MRC CPLM.
ISAC Reply 1H deleted from MRC CPLM.
ISAC Reply 1J deleted from MRC CPLM.
ISAC Reply 1K deleted from MRC CPLM.
ISAC Reply 1L deleted from MRC CPLM.
ISAC Reply 1M deleted from MRC CPLM.
ISAC Reply 1X deleted from MRC CPLM.
ISAC Reply 1Z deleted from MRC CPLM.
ISAC Reply 3AEE added to MRC CPRH.
ISAC Reply 3CJU added to MRC CPRH.
ISAC Reply 3CJV added to MRC CPRH.
ISAC Reply 3CJW added to MRC CPRH.
ISAC Reply 3CJX added to MRC CPRH.
ISAC Reply 3CJY added to MRC CPRH.
ISAC Reply 3CKF added to MRC CPRH.
ISAC Reply 3CKG added to MRC CPRH.
ISAC Reply 3HOU added to MRC CPRH.
ISAC Reply 1A deleted from MRC CPRH.
ISAC Reply 1B deleted from MRC CPRH.
ISAC Reply 1C deleted from MRC CPRH.
ISAC Reply 1D deleted from MRC CPRH.
ISAC Reply 1E deleted from MRC CPRH.
ISAC Reply 1F deleted from MRC CPRH.
ISAC Reply 1G deleted from MRC CPRH.
ISAC Reply 1H deleted from MRC CPRH.
ISAC Reply 1J deleted from MRC CPRH.
ISAC Reply 1K deleted from MRC CPRH.
ISAC Reply 1L deleted from MRC CPRH.
ISAC Reply 1M deleted from MRC CPRH.
ISAC Reply 1X deleted from MRC CPRH.
ISAC Reply 1Z deleted from MRC CPRH.
ISAC Reply 3AEE added to MRC CPRF.
ISAC Reply 3CJU added to MRC CPRF.
ISAC Reply 3CJV added to MRC CPRF.
ISAC Reply 3CJW added to MRC CPRF.
ISAC Reply 3CJX added to MRC CPRF.
ISAC Reply 3CJY added to MRC CPRF.
ISAC Reply 3CJZ added to MRC CPRF.
ISAC Reply 3CKA added to MRC CPRF.
ISAC Reply 3CKC added to MRC CPRF.
ISAC Reply 3CKD added to MRC CPRF.
ISAC Reply 3CKE added to MRC CPRF.
ISAC Reply 3CKF added to MRC CPRF.
ISAC Reply 3CKG added to MRC CPRF.
ISAC Reply 3HOU added to MRC CPRF.
ISAC Reply 1A deleted from MRC CPRF.
ISAC Reply 1B deleted from MRC CPRF.
ISAC Reply 1C deleted from MRC CPRF.
ISAC Reply 1D deleted from MRC CPRF.
ISAC Reply 1E deleted from MRC CPRF.
ISAC Reply 1F deleted from MRC CPRF.
ISAC Reply 1G deleted from MRC CPRF.
ISAC Reply 1H deleted from MRC CPRF.
ISAC Reply 1J deleted from MRC CPRF.
ISAC Reply 1K deleted from MRC CPRF.
ISAC Reply 1L deleted from MRC CPRF.
ISAC Reply 1M deleted from MRC CPRF.
ISAC Reply 1X deleted from MRC CPRF.
ISAC Reply 1Z deleted from MRC CPRF.
ISAC Reply 3AEE added to MRC FREQ.
ISAC Reply 3CJU added to MRC FREQ.
ISAC Reply 3CJV added to MRC FREQ.
ISAC Reply 3CJW added to MRC FREQ.
ISAC Reply 3CJX added to MRC FREQ.
ISAC Reply 3CJY added to MRC FREQ.
ISAC Reply 3CKC added to MRC FREQ.
ISAC Reply 3CKF added to MRC FREQ.
ISAC Reply 3CKG added to MRC FREQ.
ISAC Reply 3HOU added to MRC FREQ.
ISAC Reply 1A deleted from MRC FREQ.
ISAC Reply 1B deleted from MRC FREQ.
ISAC Reply 1C deleted from MRC FREQ.
ISAC Reply 1D deleted from MRC FREQ.
ISAC Reply 1E deleted from MRC FREQ.
ISAC Reply 1F deleted from MRC FREQ.
ISAC Reply 1G deleted from MRC FREQ.
ISAC Reply 1H deleted from MRC FREQ.
ISAC Reply 1J deleted from MRC FREQ.
ISAC Reply 1K deleted from MRC FREQ.
ISAC Reply 1L deleted from MRC FREQ.
ISAC Reply 1M deleted from MRC FREQ.
ISAC Reply 1X deleted from MRC FREQ.
ISAC Reply 1Z deleted from MRC FREQ.
ISAC Reply 3AEE added to MRC CPRL.
ISAC Reply 3CJU added to MRC CPRL.
ISAC Reply 3CJV added to MRC CPRL.
ISAC Reply 3CJW added to MRC CPRL.
ISAC Reply 3CJX added to MRC CPRL.
ISAC Reply 3CJY added to MRC CPRL.
ISAC Reply 3CKF added to MRC CPRL.
ISAC Reply 3CKG added to MRC CPRL.
ISAC Reply 3HOU added to MRC CPRL.
ISAC Reply 1A deleted from MRC CPRL.
ISAC Reply 1B deleted from MRC CPRL.
ISAC Reply 1C deleted from MRC CPRL.
ISAC Reply 1D deleted from MRC CPRL.
ISAC Reply 1E deleted from MRC CPRL.
ISAC Reply 1F deleted from MRC CPRL.
ISAC Reply 1G deleted from MRC CPRL.
ISAC Reply 1H deleted from MRC CPRL.
ISAC Reply 1J deleted from MRC CPRL.
ISAC Reply 1K deleted from MRC CPRL.
ISAC Reply 1L deleted from MRC CPRL.
ISAC Reply 1M deleted from MRC CPRL.
ISAC Reply 1X deleted from MRC CPRL.
ISAC Reply 1Z deleted from MRC CPRL.
ISAC Reply 3AEE added to MRC CQWN.
ISAC Reply 3CJU added to MRC CQWN.
ISAC Reply 3CJV added to MRC CQWN.
ISAC Reply 3CJW added to MRC CQWN.
ISAC Reply 3CJX added to MRC CQWN.
ISAC Reply 3CJY added to MRC CQWN.
ISAC Reply 3CKC added to MRC CQWN.
ISAC Reply 3CKD added to MRC CQWN.
ISAC Reply 3CKF added to MRC CQWN.
ISAC Reply 3CKG added to MRC CQWN.
ISAC Reply 3HOU added to MRC CQWN.
ISAC Reply 1A deleted from MRC CQWN.
ISAC Reply 1B deleted from MRC CQWN.
ISAC Reply 1C deleted from MRC CQWN.
ISAC Reply 1D deleted from MRC CQWN.
ISAC Reply 1E deleted from MRC CQWN.
ISAC Reply 1F deleted from MRC CQWN.
ISAC Reply 1G deleted from MRC CQWN.
ISAC Reply 1H deleted from MRC CQWN.
ISAC Reply 1J deleted from MRC CQWN.
ISAC Reply 1K deleted from MRC CQWN.
ISAC Reply 1L deleted from MRC CQWN.
ISAC Reply 1M deleted from MRC CQWN.
ISAC Reply 1X deleted from MRC CQWN.
ISAC Reply 1Z deleted from MRC CQWN.
ISAC Reply 3AEE added to MRC CPRG.
ISAC Reply 3CJU added to MRC CPRG.
ISAC Reply 3CJV added to MRC CPRG.
ISAC Reply 3CJW added to MRC CPRG.
ISAC Reply 3CJX added to MRC CPRG.
ISAC Reply 3CJY added to MRC CPRG.
ISAC Reply 3CJZ added to MRC CPRG.
ISAC Reply 3CKF added to MRC CPRG.
ISAC Reply 3CKG added to MRC CPRG.
ISAC Reply 3HOU added to MRC CPRG.
ISAC Reply 1A deleted from MRC CPRG.
ISAC Reply 1B deleted from MRC CPRG.
ISAC Reply 1C deleted from MRC CPRG.
ISAC Reply 1D deleted from MRC CPRG.
ISAC Reply 1E deleted from MRC CPRG.
ISAC Reply 1F deleted from MRC CPRG.
ISAC Reply 1G deleted from MRC CPRG.
ISAC Reply 1H deleted from MRC CPRG.
ISAC Reply 1J deleted from MRC CPRG.
ISAC Reply 1K deleted from MRC CPRG.
ISAC Reply 1L deleted from MRC CPRG.
ISAC Reply 1M deleted from MRC CPRG.
ISAC Reply 1X deleted from MRC CPRG.
ISAC Reply 1Z deleted from MRC CPRG.
ISAC Reply 3AEE added to MRC CPRJ.
ISAC Reply 3CJU added to MRC CPRJ.
ISAC Reply 3CJV added to MRC CPRJ.
ISAC Reply 3CJW added to MRC CPRJ.
ISAC Reply 3CJX added to MRC CPRJ.
ISAC Reply 3CKD added to MRC CPRJ.
ISAC Reply 3CKF added to MRC CPRJ.
ISAC Reply 3CKG added to MRC CPRJ.
ISAC Reply 3HOU added to MRC CPRJ.
ISAC Reply 1A deleted from MRC CPRJ.
ISAC Reply 1B deleted from MRC CPRJ.
ISAC Reply 1C deleted from MRC CPRJ.
ISAC Reply 1D deleted from MRC CPRJ.
ISAC Reply 1E deleted from MRC CPRJ.
ISAC Reply 1F deleted from MRC CPRJ.
ISAC Reply 1G deleted from MRC CPRJ.
ISAC Reply 1H deleted from MRC CPRJ.
ISAC Reply 1J deleted from MRC CPRJ.
ISAC Reply 1K deleted from MRC CPRJ.
ISAC Reply 1L deleted from MRC CPRJ.
ISAC Reply 1M deleted from MRC CPRJ.
ISAC Reply 1X deleted from MRC CPRJ.
ISAC Reply 1Z deleted from MRC CPRJ.
ISAC Reply 3AEE added to MRC CPSM.
ISAC Reply 3CJU added to MRC CPSM.
ISAC Reply 3CJV added to MRC CPSM.
ISAC Reply 3CJW added to MRC CPSM.
ISAC Reply 3CJX added to MRC CPSM.
ISAC Reply 3CJY added to MRC CPSM.
ISAC Reply 3CKF added to MRC CPSM.
ISAC Reply 3CKG added to MRC CPSM.
ISAC Reply 3HOU added to MRC CPSM.
ISAC Reply 1A deleted from MRC CPSM.
ISAC Reply 1B deleted from MRC CPSM.
ISAC Reply 1C deleted from MRC CPSM.
ISAC Reply 1D deleted from MRC CPSM.
ISAC Reply 1E deleted from MRC CPSM.
ISAC Reply 1F deleted from MRC CPSM.
ISAC Reply 1G deleted from MRC CPSM.
ISAC Reply 1H deleted from MRC CPSM.
ISAC Reply 1J deleted from MRC CPSM.
ISAC Reply 1K deleted from MRC CPSM.
ISAC Reply 1L deleted from MRC CPSM.
ISAC Reply 1M deleted from MRC CPSM.
ISAC Reply 1X deleted from MRC CPSM.
ISAC Reply 1Z deleted from MRC CPSM.
ISAC Reply 3AEE added to MRC CPRK.
ISAC Reply 3CJU added to MRC CPRK.
ISAC Reply 3CJV added to MRC CPRK.
ISAC Reply 3CJW added to MRC CPRK.
ISAC Reply 3CKF added to MRC CPRK.
ISAC Reply 3CKG added to MRC CPRK.
ISAC Reply 3HOU added to MRC CPRK.
ISAC Reply 1A deleted from MRC CPRK.
ISAC Reply 1B deleted from MRC CPRK.
ISAC Reply 1C deleted from MRC CPRK.
ISAC Reply 1D deleted from MRC CPRK.
ISAC Reply 1E deleted from MRC CPRK.
ISAC Reply 1F deleted from MRC CPRK.
ISAC Reply 1G deleted from MRC CPRK.
ISAC Reply 1H deleted from MRC CPRK.
ISAC Reply 1J deleted from MRC CPRK.
ISAC Reply 1K deleted from MRC CPRK.
ISAC Reply 1L deleted from MRC CPRK.
ISAC Reply 1M deleted from MRC CPRK.
ISAC Reply 1X deleted from MRC CPRK.
ISAC Reply 1Z deleted from MRC CPRK.
ISAC Reply 3AEE added to MRC CQQC.
ISAC Reply 3CJU added to MRC CQQC.
ISAC Reply 3CJV added to MRC CQQC.
ISAC Reply 3CJW added to MRC CQQC.
ISAC Reply 3CKF added to MRC CQQC.
ISAC Reply 3CKG added to MRC CQQC.
ISAC Reply 3HOU added to MRC CQQC.
ISAC Reply 1A deleted from MRC CQQC.
ISAC Reply 1B deleted from MRC CQQC.
ISAC Reply 1C deleted from MRC CQQC.
ISAC Reply 1D deleted from MRC CQQC.
ISAC Reply 1E deleted from MRC CQQC.
ISAC Reply 1F deleted from MRC CQQC.
ISAC Reply 1G deleted from MRC CQQC.
ISAC Reply 1H deleted from MRC CQQC.
ISAC Reply 1J deleted from MRC CQQC.
ISAC Reply 1K deleted from MRC CQQC.
ISAC Reply 1L deleted from MRC CQQC.
ISAC Reply 1M deleted from MRC CQQC.
ISAC Reply 1X deleted from MRC CQQC.
ISAC Reply 1Z deleted from MRC CQQC.
ISAC Reply 3AEE added to MRC CRCF.
ISAC Reply 3CJU added to MRC CRCF.
ISAC Reply 3CJV added to MRC CRCF.
ISAC Reply 3CJW added to MRC CRCF.
ISAC Reply 3CKC added to MRC CRCF.
ISAC Reply 3CKF added to MRC CRCF.
ISAC Reply 3CKG added to MRC CRCF.
ISAC Reply 3HOU added to MRC CRCF.
ISAC Reply 1A deleted from MRC CRCF.
ISAC Reply 1B deleted from MRC CRCF.
ISAC Reply 1C deleted from MRC CRCF.
ISAC Reply 1D deleted from MRC CRCF.
ISAC Reply 1E deleted from MRC CRCF.
ISAC Reply 1F deleted from MRC CRCF.
ISAC Reply 1G deleted from MRC CRCF.
ISAC Reply 1H deleted from MRC CRCF.
ISAC Reply 1J deleted from MRC CRCF.
ISAC Reply 1K deleted from MRC CRCF.
ISAC Reply 1L deleted from MRC CRCF.
ISAC Reply 1M deleted from MRC CRCF.
ISAC Reply 1X deleted from MRC CRCF.
ISAC Reply 1Z deleted from MRC CRCF.
ISAC Reply 3AEE added to MRC CPRN.
ISAC Reply 3CJU added to MRC CPRN.
ISAC Reply 3CJV added to MRC CPRN.
ISAC Reply 3CJW added to MRC CPRN.
ISAC Reply 3CJX added to MRC CPRN.
ISAC Reply 3CKF added to MRC CPRN.
ISAC Reply 3CKG added to MRC CPRN.
ISAC Reply 3HOU added to MRC CPRN.
ISAC Reply 1A deleted from MRC CPRN.
ISAC Reply 1B deleted from MRC CPRN.
ISAC Reply 1C deleted from MRC CPRN.
ISAC Reply 1D deleted from MRC CPRN.
ISAC Reply 1E deleted from MRC CPRN.
ISAC Reply 1F deleted from MRC CPRN.
ISAC Reply 1G deleted from MRC CPRN.
ISAC Reply 1H deleted from MRC CPRN.
ISAC Reply 1J deleted from MRC CPRN.
ISAC Reply 1K deleted from MRC CPRN.
ISAC Reply 1L deleted from MRC CPRN.
ISAC Reply 1M deleted from MRC CPRN.
ISAC Reply 1X deleted from MRC CPRN.
ISAC Reply 1Z deleted from MRC CPRN.
ISAC Reply 3AEE added to MRC CPRP.
ISAC Reply 3CJU added to MRC CPRP.
ISAC Reply 3CJV added to MRC CPRP.
ISAC Reply 3CKC added to MRC CPRP.
ISAC Reply 3CKF added to MRC CPRP.
ISAC Reply 3CKG added to MRC CPRP.
ISAC Reply 3HOU added to MRC CPRP.
ISAC Reply 1A deleted from MRC CPRP.
ISAC Reply 1B deleted from MRC CPRP.
ISAC Reply 1C deleted from MRC CPRP.
ISAC Reply 1D deleted from MRC CPRP.
ISAC Reply 1E deleted from MRC CPRP.
ISAC Reply 1F deleted from MRC CPRP.
ISAC Reply 1G deleted from MRC CPRP.
ISAC Reply 1H deleted from MRC CPRP.
ISAC Reply 1J deleted from MRC CPRP.
ISAC Reply 1K deleted from MRC CPRP.
ISAC Reply 1L deleted from MRC CPRP.
ISAC Reply 1M deleted from MRC CPRP.
ISAC Reply 1X deleted from MRC CPRP.
ISAC Reply 1Z deleted from MRC CPRP.
ISAC Reply 3AEE added to MRC CPSF.
ISAC Reply 3CJU added to MRC CPSF.
ISAC Reply 3CJV added to MRC CPSF.
ISAC Reply 3CJW added to MRC CPSF.
ISAC Reply 3CKF added to MRC CPSF.
ISAC Reply 3CKG added to MRC CPSF.
ISAC Reply 3HOU added to MRC CPSF.
ISAC Reply 1A deleted from MRC CPSF.
ISAC Reply 1B deleted from MRC CPSF.
ISAC Reply 1C deleted from MRC CPSF.
ISAC Reply 1D deleted from MRC CPSF.
ISAC Reply 1E deleted from MRC CPSF.
ISAC Reply 1F deleted from MRC CPSF.
ISAC Reply 1G deleted from MRC CPSF.
ISAC Reply 1H deleted from MRC CPSF.
ISAC Reply 1J deleted from MRC CPSF.
ISAC Reply 1K deleted from MRC CPSF.
ISAC Reply 1L deleted from MRC CPSF.
ISAC Reply 1M deleted from MRC CPSF.
ISAC Reply 1X deleted from MRC CPSF.
ISAC Reply 1Z deleted from MRC CPSF.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED00136*)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3CEPDALA000*;MATT3CEPDALA000$DGSA000*;MATT3CEPDALA000$$DGSA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3CEP | CASE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL7075 | ALUMINUM ALLOY 7075 |
| BND000 | BRONZE |
| BNAAAA | BRONZE CAST |
| CLD000 | CERAMIC |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CCA000 | COTTON |
| FBA000 | FIBER |
| FG0000 | FIBERGLASS |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| RBR000 | HARD RUBBER |
| FEA000 | IRON |
| FEB000 | IRON CAST |
| LRA000 | LEATHER |
| LRE000 | LEATHER ARTIFICIAL |
| MGB000 | MAGNESIUM ALLOY |
| AYA000 | MICA |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCJ000 | PLASTIC MELAMINE |
| PCCB00 | PLASTIC NYLON |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAK00 | PLASTIC SILICONE |
| PCBC00 | PLASTIC STYRENE |
| CLB000 | PORCELAIN |
| STA000 | STEEL |
| ST0302 | STEEL COMP 302 |
| ST0304 | STEEL COMP 304 |
| ST0316 | STEEL COMP 316 |
| STB000 | STEEL CORROSION RESISTING |
| AAA012 | THERMOPLASTIC |
| WDC000 | WOOD |
| WDL000 | WOOD MAHOGANY |
| WDR000 | WOOD OAK |
| WDE000 | WOOD WALNUT |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
AKPXAPOLE QUANTITY
THE NUMBER OF POLES INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AKPXA10*)
CPLMJMAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE
THE MAXIMUM CURRENT LOAD THAT EACH POLE IS RATED TO CARRY CONTINUOUSLY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPLM3CKDJAC2.0*;CPLM3CKDJAC2.0$JAC2.0*;CPLM3CKDJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CJZ | SIXTH LOCATION |
| 3CKA | SEVENTH LOCATION |
| 3CKB | EIGHTH LOCATION |
| 3CKD | TENTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| L | MILLIAMPERES |
| Table 3 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
CPRHDCIRCUIT PROTECTION TYPE
INDICATES THE TYPE OF ELECTRICAL CONDITION THAT WILL CAUSE THE DEVICE TO TRIP.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CPRH3CJWDAK*;CPRH3CJWDAK$DAN*;CPRH3CJWDAK$$DAN*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ49) | Reply |
| AM | ERROR CURRENT |
| AN | ERROR VOLTAGE |
| AJ | OVERCURRENT |
| AK | OVERVOLTAGE |
| AG | REVERSE CURRENT |
| AH | REVERSE PHASE |
| AA | SWITCH DISCONNECTOR |
| AL | UNDERCURRENT |
| AD | UNDERVOLTAGE |
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJADB2*;TTQYJADB2$$JADB3*;TTQYJADB2$JADB2*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AQE | BATTERY CLIP |
| AEM | BUS BAR |
| ADB | CLIP |
| AEB | COMPRESSION |
| AFJ | DOUBLE SCREW |
| ABR | EYELET |
| AQD | FRAMEWORK CLIPS |
| AEC | KNIFE BLADE |
| AAM | PIN |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| ABQ | SCREW |
| ABT | SCREW BASE |
| AAS | SOLDER STUD |
| AJJ | STAB |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| ABD | THREADED STUD |
| ACB | TURRET |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC CPRF, YOU MUST ANSWER MRC (FREQ)
CPRFJOPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS
INDICATES THE TYPE AND VALUE OF OPERATING VOLTAGE FOR WHICH EACH POLE IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPRF3CJYJC2.0*;CPRF3CJYJC2.0$JC2.0*;CPRF3CJYJC2.0$$JC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CJZ | SIXTH LOCATION |
| 3CKA | SEVENTH LOCATION |
| 3CKC | NINTH LOCATION |
| 3CKD | TENTH LOCATION |
| 3CKE | ELEVENTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(FREQ3CJWB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CKC | NINTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
IF STYLE/REPLY CODE(s) FG WERE ENTERED FOR MRC CPRL, YOU MUST ANSWER MRC (CQWN)
CPRLDTRIP RELEASE CHARACTERISTIC
DENOTES THE TYPE OF TRIP RELEASE ACTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CPRL3CJXDFG*;CPRL3CJXDFG$DFF*;CPRL3CJXDFG$$DFF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH83) | Reply |
| FF | INSTANTANEOUS |
| FG | TIME DELAY |
CQWN*JTRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT
THE LENGTH OF TIME,EXPRESSED IN SECONDS,THAT AN OVERLOAD MAY EXIST BEFORE THE DEVICE WILL TRIP AT A SPECIFIED CONTINUOUS CURRENT.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQWN3CKCJBAE2.0*;CQWN3CKCJBAE2.0$JBAE2.0*;CQWN3CKCJBAE2.0$$JBAE2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CKC | NINTH LOCATION |
| 3CKD | TENTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AP32) | Reply |
| AB | AT 100 PCT |
| BC | AT 1000 PCT |
| BG | AT 101 PCT |
| AC | AT 105 PCT |
| BD | AT 1100 PCT |
| AD | AT 115 PCT |
| AA | AT 1150 PCT |
| AE | AT 120 PCT |
| BE | AT 1200 PCT |
| AF | AT 125 PCT |
| AG | AT 130 PCT |
| AH | AT 135 PCT |
| AJ | AT 138 PCT |
| AK | AT 150 PCT |
| AL | AT 160 PCT |
| AM | AT 175 PCT |
| AN | AT 180 PCT |
| AP | AT 200 PCT |
| BF | AT 2000 PCT |
| AQ | AT 225 PCT |
| AR | AT 250 PCT |
| AS | AT 300 PCT |
| AT | AT 325 PCT |
| AW | AT 400 PCT |
| BH | AT 425 PCT |
| AX | AT 500 PCT |
| AY | AT 600 PCT |
| AZ | AT 700 PCT |
| BA | AT 800 PCT |
| BB | AT 900 PCT |
IF STYLE/REPLY CODE(s) AAF WERE ENTERED FOR MRC CPRQ, YOU MUST ANSWER MRC (CPRR)
IF STYLE/REPLY CODE(s) AAZ WERE ENTERED FOR MRC CPRQ, YOU MUST ANSWER MRC (CPRR and CQTL)
CPRQDRESET METHOD
THE MEANS PROVIDED TO REPOSITION THE MECHANISM SO THAT THE DEVICE IS READY TO FUNCTION.
Enter the applicable reply code from the table below
(CPRQDAAZ*;CPRQDAAF$$DAAC*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAC | AUTOMATIC |
| AAZ | ELECTRIC |
| AAF | MANUAL |
CQTL*JRESET ACTUATOR VOLTAGE RATING AND TYPE IN VOLTS
THE VOLTAGE,EXPRESSED IN VOLTS,AND CURRENT TYPE FOR WHICH THE RESET ACTUATOR IS RATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQTLJAC2.0*;CQTLJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
CPRR*DMAIN CONTACT TRIPPING MECHANISM TYPE
INDICATES THE TYPE OF MECHANISM PROVIDED FOR TRIPPING MAIN CONTACTS.
Enter the applicable reply code from the table below
(CPRRDHF*;CPRRDHE$$DHE*)
| Table 1 |
| Reply Code (AC82) | Reply |
| HF | NONTRIP FREE |
| HE | TRIP FREE |
IF STYLE/REPLY CODE(s) 1A OR 2A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ABXD and AJWX and AEBP and ADAQ and ADAT)
IF STYLE/REPLY CODE(s) 3A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ABXD and AJWX and AEBS and ABPM)
IF STYLE/REPLY CODE(s) 4A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBP and AJWX and ADAQ and ADAT and AEBY)
IF STYLE/REPLY CODE(s) 5A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and AJWX and AEBP and ABHP and ABMK and AEBY)
IF STYLE/REPLY CODE(s) 6A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ABXD and ADAU and AEBP and ADAQ and ADAT)
IF STYLE/REPLY CODE(s) 7A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ABXD and AJWX and AEBP and ADAQ and ADAT and AEBY)
IF STYLE/REPLY CODE(s) 8A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAU and AEBY and AEBP and ADAT and ADAQ)
IF STYLE/REPLY CODE(s) 9A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEHA and AEBY and AJEC and ADAU and AEBP)
IF STYLE/REPLY CODE(s) 10A OR 11A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and ADAU and ADAQ and ADAT)
IF STYLE/REPLY CODE(s) 12A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and AJWX and AEBP and ADAQ and ADAT and AEBY)
IF STYLE/REPLY CODE(s) 13A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and ADAU and AEBY and ADAQ and ADAT and AEBP)
IF STYLE/REPLY CODE(s) 14A OR 15A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJWX and AEBP and AEBY and ADAT and ABHP)
IF STYLE/REPLY CODE(s) 16A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEHA and AEBP and ADAT and ADAQ and ADAU)
IF STYLE/REPLY CODE(s) 17A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBY and ADAT and ABHP and AJWX and AEBP)
IF STYLE/REPLY CODE(s) 18A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBY and ADAT and ABHP and AEHA and AJWX and AEBP)
IF STYLE/REPLY CODE(s) 19A OR 20A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ADAV)
IF STYLE/REPLY CODE(s) 21A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAU and ADAT and ADAQ)
IF STYLE/REPLY CODE(s) 22A WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAU and ABKW and ADAT and ADAQ and AEBY and ABHP)
IF STYLE/REPLY CODE(s) 1B OR 7B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and ABXD and AJWX and AEBP)
IF STYLE/REPLY CODE(s) 2B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and ABXD and AJWX and AEBP and AEBY)
IF STYLE/REPLY CODE(s) 3B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and AJWX and AEBP and AEBY)
IF STYLE/REPLY CODE(s) 4B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and ABXD and ADAU and AEBP and AEBY and AEHA)
IF STYLE/REPLY CODE(s) 5B OR 6B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and ADAU and AEBP and ABXD)
IF STYLE/REPLY CODE(s) 8B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBY and AEBP and AEBQ and ADAQ and ADAT and AEHA and ADAU)
IF STYLE/REPLY CODE(s) 9B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBQ and ADAT and AEHA and AEBY and AJEC and ADAU and AEBP and ADAQ)
IF STYLE/REPLY CODE(s) 10B OR 19B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEHA and AEBY and AJWX and AJEC and ADAQ and ADAT and AEBP and AEBQ)
IF STYLE/REPLY CODE(s) 11B OR 18B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBY and AEHA and AEBP and ADAT and AEBQ and ADAQ and ADAU and AJEC)
IF STYLE/REPLY CODE(s) 12B, 13B, 15B OR 21B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBY and AEBQ and AEBP and ADAQ and AEHA and ADAT and AJEC and ADAU)
IF STYLE/REPLY CODE(s) 14B OR 16B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEHA and ADAT and AEBY and ADAQ and AEBP and ABKW and AJEC and AEBQ)
IF STYLE/REPLY CODE(s) 17B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and AEBP and ADAQ and AEHA and ADAT and AEBY and AJWX and AEBQ)
IF STYLE/REPLY CODE(s) 20B WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and ADAU and ADAQ and ADAT and AEBQ)
IF STYLE/REPLY CODE(s) 1C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and ABXD and AJWX and AEBP and AEBY and AEHA)
IF STYLE/REPLY CODE(s) 2C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAT and ADAQ and AEBQ and AJWX and AEBP and AEBY and AEHA)
IF STYLE/REPLY CODE(s) 3C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJWX and AEBP and ABXD and ADAT and ADAQ and AEBQ)
IF STYLE/REPLY CODE(s) 4C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAU and AEBY and AEBP and AEHA and ADAT and ADAQ and AEBQ)
IF STYLE/REPLY CODE(s) 5C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBQ and ADAT and ADAQ and AEHA and AEBY and AJEC and ADAU and AEBP)
IF STYLE/REPLY CODE(s) 6C OR 7C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and ADAU and ADAQ and ADAT and AEBQ)
IF STYLE/REPLY CODE(s) 8C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AEBQ and ADAQ and AJEC and AJWX and AEBP and AEBY and ADAT and AEHA)
IF STYLE/REPLY CODE(s) 9C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (AJEC and ADAU and AEBY and ADAQ and AEHA and ADAT and AEBP and AEBQ)
IF STYLE/REPLY CODE(s) 1D WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ABKW and ABHP and ABMK)
IF STYLE/REPLY CODE(s) 2D WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ABHP and ADAV)
IF STYLE/REPLY CODE(s) 10C WERE ENTERED FOR MRC AAQL, YOU MUST ANSWER MRC (ADAQ and ADAT and ADAU and AEBQ)
AAQLLBODY STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BODY.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAQLL20B)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAO1087 | 10A | SINGLE POLE TYPE |
| AAO1110 | 10B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1131 | 10C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1088 | 11A | SINGLE POLE TYPE |
| AAO1111 | 11B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1089 | 12A | SINGLE POLE TYPE |
| AAO1112 | 12B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1090 | 13A | SINGLE POLE TYPE |
| AAO1113 | 13B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1091 | 14A | SINGLE POLE TYPE |
| AAO1114 | 14B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1092 | 15A | SINGLE POLE TYPE |
| AAO1115 | 15B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1093 | 16A | SINGLE POLE TYPE |
| AAO1116 | 16B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1094 | 17A | SINGLE POLE TYPE |
| AAO1117 | 17B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1095 | 18A | SINGLE POLE TYPE |
| AAO1118 | 18B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1096 | 19A | SINGLE POLE TYPE |
| AAO1119 | 19B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1078 | 1A | SINGLE POLE TYPE |
| AAO1101 | 1B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1122 | 1C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1132 | 1D | RECTANGULAR DIMENSIONAL ENVELOPE |
| AAO1097 | 20A | SINGLE POLE TYPE |
| AAO1120 | 20B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1098 | 21A | SINGLE POLE TYPE |
| AAO1121 | 21B | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1099 | 22A | SINGLE POLE TYPE |
| AAO1079 | 2A | SINGLE POLE TYPE |
| AAO1102 | 2B | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1123 | 2C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| DQ01060 | 2D | CYLINDRICAL DIMENSIONAL ENVELOPE |
| AAO1080 | 3A | SINGLE POLE TYPE |
| AAO1103 | 3B | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1124 | 3C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1081 | 4A | SINGLE POLE TYPE |
| AAO1104 | 4B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1125 | 4C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1082 | 5A | SINGLE POLE TYPE |
| AAO1105 | 5B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1126 | 5C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1083 | 6A | SINGLE POLE TYPE |
| AAO1106 | 6B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1127 | 6C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1084 | 7A | SINGLE POLE TYPE |
| AAO1107 | 7B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1128 | 7C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1085 | 8A | SINGLE POLE TYPE |
| AAO1108 | 8B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1129 | 8C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| AAO1086 | 9A | SINGLE POLE TYPE |
| AAO1109 | 9B | MULTIPOLE-SINGLE ACTUATOR TYPE |
| AAO1130 | 9C | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
AJWX*JMOUNTING SURFACE TO TERMINAL END DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJWXJAC2.0*;AJWXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJEC*JBOSS HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJECJAA2.0*;AJECJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEHA*JDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH
THE DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO THE WIDTH OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHAJAA2.0*;AEHAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEBY*JDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH
THE DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO THE LENGTH OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBYJAA2.0*;AEBYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEBS*JCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER
THE CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO THE DIAMETER OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBSJAA2.0*;AEBSJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEBQ*JCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH
THE CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO THE WIDTH OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBQJAA2.0*;AEBQJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEBP*JCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH
THE CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO THE LENGTH OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBPJAA2.0*;AEBPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAB2.0*;ADAVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAU*JBODY HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE BODY,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAUJAB2.0*;ADAUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAT*JBODY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE BODY,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADATJAB2.0*;ADATJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAQ*JBODY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BODY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAQJAB2.0*;ADAQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABXD*JBUSHING LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A BUSHING,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABXDJAB2.0*;ABXDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPM*JBODY DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPMJAB2.0*;ABPMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLB2.0*;ABHPJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) AET, AFA, AHF OR AJZ WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (THSD)
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (AEBV)
IF STYLE/REPLY CODE(s) ABY WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (ABTD)
AXHRJMOUNTING FACILITY TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF FACILITIES BY WHICH THE ITEM IS MOUNTED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AXHRJACQ2*;AXHRJACQ2$$JACQ3*;AXHRJACQ2$JACQ2*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BMT | ADAPTER PLATE |
| ABH | CLAMP |
| AFL | CLIP |
| BAE | DIN RAIL |
| AGN | LOCKING BUSHING W/PANEL SEAL |
| ABP | PLUG-IN |
| BKY | RAIL |
| ABY | SLOT |
| ADF | SNAP-IN |
| ANF | SPRING CLIP |
| BEB | STATIONARY |
| ACD | TERMINAL |
| AFA | THREADED BUSHING |
| AJZ | THREADED BUSHING W/PANEL SEAL |
| AHF | THREADED HOLE |
| AET | THREADED STUD |
| BAJ | THREE-PRONG PLUG |
| ACQ | UNTHREADED HOLE |
AEBV*JUNTHREADED MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN UNTHREADED MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBVJAB2.0*;AEBVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTD*JMOUNTING SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTDJAB2.0*;ABTDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTJS*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMERED BY PACKAGING OR PACKING MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJSJKGB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| GM | GRAMS |
| KG | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CPRG*JMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS
INDICATES THE TYPE AND VALUE OF THE MAXIMUM SHORT CIRCUIT CURRENT THAT THE ITEM WILL SUCCESSFULLY INTERRUPT,PER POLE,AT THE SPECIFIED RATED VOLTAGE,EXPRESSED IN AMPERES.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPRG3CJZJB2.0*;CPRG3CJZJB2.0$JB2.0*;CPRG3CJZJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CJZ | SIXTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
IF STYLE/REPLY CODE(s) AAT WERE ENTERED FOR MRC CPRJ, YOU MUST ANSWER MRC (CPSM)
IF STYLE/REPLY CODE(s) AAW WERE ENTERED FOR MRC CPRJ, YOU MUST ANSWER MRC (CPSM and CRCF)
IF STYLE/REPLY CODE(s) AAX WERE ENTERED FOR MRC CPRJ, YOU MUST ANSWER MRC (CRCF)
CPRJ*DTRIP RELEASE METHOD
THE MEANS BY WHICH THE TRIP MECHANISM IS RELEASED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CPRJ3CJWDAAY*;CPRJ3CJWDAAY$DAAA*;CPRJ3CJWDAAY$$DAAA*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CKD | TENTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AK66) | Reply |
| AAS | MAGNETIC |
| AAT | MAGNETIC-HYDRAULIC |
| AAY | SOLID STATE |
| AAW | THERMAL |
| AAA | THERMAL OVERLOAD |
| AAX | THERMAL-MAGNETIC |
IF STYLE/REPLY CODE(s) AX, AZ, BB OR BR WERE ENTERED FOR MRC CPSM, YOU MUST ANSWER MRC (CPRK and CQQC)
CPSM*DINTERNAL TRIP RELEASE CONFIGURATION
THE BASIC INTERNAL ELECTRICAL CONFIGURATION OF THE TRIP MECHANISM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CPSM3CJVDAY*;CPSM3CJVDAY$DBB*;CPSM3CJVDAY$$DBB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CJY | FIFTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AE97) | Reply |
| AA | DUAL COIL |
| AT | RELAY TRIP |
| AW | SERIES TRIP |
| AY | SERIES TRIP W/AUXILIARY LOAD TERMINAL |
| AZ | SERIES TRIP W/AUXILIARY LOAD TERMINAL AND REMOTE TRIP FEATURE |
| BA | SERIES TRIP W/DUAL RATING |
| BB | SERIES TRIP W/DUAL RATING AND REMOTE TRIP FEATURE |
| AX | SERIES TRIP W/REMOTE TRIP FEATURE |
| BR | SERIES/RELAY TRIP |
| BC | SHUNT TRIP |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
CPRK*JAUXILIARY TRIP COIL VOLTAGE TYPE AND RATING IN VOLTS
INDICATES THE TYPE AND VOLTAGE RATING REQUIRED TO OPERATE THE AUXILIARY /REMOTELY ACTUATED/ TRIP ACTUATOR,EXPRESSED IN VOLTS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPRK3AEEJCB2.0*;CPRK3AEEJCB2.0$JCB2.0*;CPRK3AEEJCB2.0$$JCB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQQC*DTRIP RELEASE DUTY CYCLE
THE WORKING PERIOD WHICH THE TRIP RELEASE IS DESIGNED TO OPERATE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CQQC3CJUDAAF*;CQQC3CJUDAAF$DAAE*;CQQC3CJUDAAF$$DAAE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD63) | Reply |
| AAE | CONTINUOUS |
| AAF | INTERMITTENT |
CRCF*JTRIP RELEASE AMBIENT TEMP RATING
THE TEMPERATURE OF THE MEDIUM SURROUNDING THE TRIP RELEASE AT WHICH IT CAN BE OPERATED CONTINUOUSLY.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRCF3AEEJCC2.0*;CRCF3AEEJCC2.0$JCC2.0*;CRCF3AEEJCC2.0$$JCC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CKC | NINTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CPRN*BULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT
THE CONTINUOUS CURRENT RATING PER POLE AT WHICH THE DEVICE MUST TRIP IN A SPECIFIED TIME,EXPRESSED IN PERCENT.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CPRN3CJVB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CJX | FOURTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CPRP*JULTIMATE TRIP TIME PER POLE IN SECONDS
THE ULTIMATE TIME PER POLE IN WHICH THE DEVICE MUST TRIP,EXPRESSED IN SECONDS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPRP3AEEJB2.0*;CPRP3AEEJB2.0$JB2.0*;CPRP3AEEJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CKC | NINTH LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDQH*;ENACDQD$DAK*;ENACDQD$$DAK*)
| Table 1 |
| Reply Code (EN02) | Reply |
| QD | HEXAVALENT CHROMIUM ALTERNATIVE |
| AK | NON-CADMIUM PRODUCT |
| QH | NON-LEAD ALTERNATIVE PRODUCTS |
IF STYLE/REPLY CODE(s) EM, MJ, SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CTTC) or (CQJX and CQQR) or (CQJX and AAJE)
IF STYLE/REPLY CODE(s) JC, JE, JF, NC, NE OR NF WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
IF STYLE/REPLY CODE(s) JS, NJ, NS OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP) or (CQJX and CQQR)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDSM*;THSDDNJ$$DNC*)
| Table 1 |
| Reply Code (AH06) | Reply |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJXJA2.0*;CQJXJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTTCJNTE2.0*;CTTCJNTE2.0$$JNTE2.1*)
| Table 1 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAS1)
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQQRB2.0*;CQQRB2.0$$BM2.0*)
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJEJAM32.0/P50.0*;AAJEJAM32.0/P50.0$$JA*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CPRT*JMANUAL ACTUATOR TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF ACTUATORS PROVIDED FOR MANUAL CONTROL.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CPRTJAAHX2*;CPRTJAAHX2$$JAAHX3*;CPRTJAAHX2$JAAHX2*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAHB | FLAT |
| AAAU | FLAT ROCKER |
| AAEW | PUSH BUTTON |
| AAHZ | PUSH-PULL |
| AAAA | ROCKER ACTUATOR |
| AAHX | ROTARY |
| AAHY | TOGGLE |
CPRW*DACTUATOR FUNCTION
DENOTES THE ACTION IMPARTED BY ACTUATOR OPERATION.
Enter the applicable reply code from the table below
(CPRWDBZ*;CPRWDCA$DBY*;CPRWDCA$$DBY*)
| Table 1 |
| Reply Code (AE74) | Reply |
| BY | RESET |
| CA | TRIP W/SEPARATE RESET |
| BZ | TRIP-RESET |
CPRX*DACTUATOR POSITION DESIGNATION
AN INDICATION OF THE DESIGNATED POSITION OF THE ACTUATOR.
Enter the applicable reply code from the table below
(CPRXDEAZ*;CPRXDEBB$$DEBC*)
| Table 1 |
| Reply Code (AJ50) | Reply |
| EAR | AT EACH POLE |
| EAY | AT POLE FIVE |
| EAX | AT POLE FOUR |
| EAS | AT POLE ONE |
| EAZ | AT POLE SIX |
| EAW | AT POLE THREE |
| EAT | AT POLE TWO |
| EBE | BETWEEN POLE FIVE AND SIX |
| EBD | BETWEEN POLE FOUR AND FIVE |
| EBA | BETWEEN POLE ONE AND TWO |
| EBC | BETWEEN POLE THREE AND FOUR |
| EBB | BETWEEN POLE TWO AND THREE |
CPRY*DEXTERNAL ACTUATOR LINKAGE ARRANGEMENT
INDICATES THE ARRANGEMENT OF THE EXTERNALLY CONNECTED ACTUATORS.
Enter the applicable reply code from the table below
(CPRYDBR*;CPRYDBX$$DBY*)
| Table 1 |
| Reply Code (AH86) | Reply |
| BN | FIVE AND SIX LINKED |
| BM | FOUR AND FIVE LINKED |
| BS | FOUR, FIVE, AND SIX LINKED |
| BJ | ONE AND TWO LINKED |
| BP | ONE, TWO, AND THREE LINKED |
| BT | ONE, TWO, THREE, AND FOUR LINKED |
| BY | ONE, TWO, THREE, FOUR, AND FIVE LINKED |
| CA | ONE, TWO, THREE, FOUR, FIVE, AND SIX LINKED |
| BL | THREE AND FOUR LINKED |
| BR | THREE, FOUR, AND FIVE LINKED |
| BX | THREE, FOUR, FIVE, AND SIX LINKED |
| BK | TWO AND THREE LINKED |
| BQ | TWO, THREE, AND FOUR LINKED |
| BW | TWO, THREE, FOUR, AND FIVE LINKED |
| BZ | TWO, THREE, FOUR, FIVE, AND SIX LINKED |
CPRZ*JAUXILIARY SWITCH FUNCTION AND QUANTITY
THE FUNCTION FOR WHICH THE AUXILIARY SWITCH IS DESIGNED AND THE NUMBER PROVIDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CPRZJCC2*)
| Table 1 |
| Reply Code (AE74) | Reply |
| CB | ALARM |
| CC | CONTROL |
CQSM*HSWITCH LOCATION AND POSITION DESIGNATION
INDICATES THE LOCATION OF THE SWITCH IN RELATION TO ITS DESIGNATED POSITION.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CQSMHNTEEAZ2.0*;CQSMHNTEEAZ2.0$$HNTEEAZ2.1*)
| Table 1 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
| Table 2 |
| Reply Code (AJ50) | Reply |
| EAR | AT EACH POLE |
| EAY | AT POLE FIVE |
| EAX | AT POLE FOUR |
| EAS | AT POLE ONE |
| EAZ | AT POLE SIX |
| EAW | AT POLE THREE |
| EAT | AT POLE TWO |
| EBE | BETWEEN POLE FIVE AND SIX |
| EBD | BETWEEN POLE FOUR AND FIVE |
| EBA | BETWEEN POLE ONE AND TWO |
| EBC | BETWEEN POLE THREE AND FOUR |
| EBB | BETWEEN POLE TWO AND THREE |
AEGJ*DSWITCH CONTACT ARRANGEMENT
A DESIGNATION THAT DESCRIBES THE BASIC ELECTRICAL CONFIGURATION OF A SWITCH.
Enter the applicable reply code from the table below
(AEGJDBG*;AEGJDBF$$DCN*)
| Table 1 |
| Reply Code (AD85) | Reply |
| BF | DOUBLE POLE, DOUBLE THROW |
| BE | DOUBLE POLE, SINGLE THROW, NORMALLY CLOSED |
| BD | DOUBLE POLE, SINGLE THROW, NORMALLY OPEN |
| CK | SINGLE POLE, DOUBLE THROW |
| BG | SINGLE POLE, SINGLE THROW, NORMALLY CLOSED |
| CN | SINGLE POLE, SINGLE THROW, NORMALLY OPEN |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
CSSX*JSWITCH CURRENT RATING AND TYPE IN AMPS
THE AMOUNT OF CURRENT,EXPRESSED IN AMPERES,AND THE TYPE FOR WHICH THE SWITCH IS RATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSSXJDC2.0*;CSSXJDC2.0$$JDC2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
CSWP*JSWITCH VOLTAGE RATING AND TYPE IN VOLTS
THE VOLTAGE,EXPRESSED IN VOLTS,AND CURRENT TYPE FOR WHICH THE SWITCH IS RATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSWPJDC2.0*;CSWPJDC2.0$$JDC2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
CRTK*DSWITCH TERMINAL TYPE
INDICATES THE TYPE OF TERMINAL FOR PROVIDING ELECTRICAL CONNECTION TO THE SWITCH.
Enter the applicable reply code from the table below
(CRTKDADA*;CRTKDACB$$DAEM*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AKT | BLADE |
| AEM | BUS BAR |
| ADB | CLIP |
| AEB | COMPRESSION |
| AFJ | DOUBLE SCREW |
| ABR | EYELET |
| AEC | KNIFE BLADE |
| AAM | PIN |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| ABQ | SCREW |
| ABT | SCREW BASE |
| AAS | SOLDER STUD |
| AJJ | STAB |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| ABD | THREADED STUD |
| ACB | TURRET |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
CQXF*DINCLOSURE PROTECTION TYPE FOR WHICH DESIGNED
INDICATES THE TYPE OF PROTECTION FOR WHICH THE INCLOSURE IS DESIGNED.
Enter the applicable reply code from the table below
(CQXFDABW*;CQXFDABM$$DABN*)
| Table 1 |
| Reply Code (AP30) | Reply |
| AAX | ARC RESISTANT |
| AAY | COMBUSTION PROOF |
| AAZ | CORROSION RESISTANT |
| ABA | DRIPPROOF |
| ABB | DUSTPROOF |
| ABC | DUSTTIGHT |
| ABD | EXPLOSION PROOF |
| ABE | EXPLOSION RESISTANT |
| ABF | FLAME RESISTANT |
| ABG | FUNGUS PROOF |
| ABH | FUNGUS RESISTANT |
| ABJ | GENERAL PURPOSE |
| ABK | HERMETICALLY SEALED |
| ABL | HUMIDITY PROOF |
| ABM | HUMIDITY RESISTANT |
| ACJ | ICE RESISTANT |
| ABP | MOISTURE PROOF |
| ABN | MOISTURE RESISTANT |
| AAQ | OIL RESISTANT |
| ABQ | OILTIGHT |
| ABR | RAINTIGHT |
| ABS | SALT SPRAY PROOF |
| ABT | SALT WATER RESISTANT |
| ABX | SAND RESISTANT |
| ABW | SANDTIGHT |
| ABZ | SHOCK RESISTANT |
| ABY | SHOCKPROOF |
| ACA | SPLASHPROOF |
| ACB | TAMPERPROOF |
| ACC | VAPORTIGHT |
| ACE | VIBRATION RESISTANT |
| ACD | VIBRATIONPROOF |
| ACF | WATER RESISTANT |
| AAS | WATERPROOF |
| ACG | WATERTIGHT |
| ACH | WEATHERPROOF |
IF STYLE/REPLY CODE(s) APE WERE ENTERED FOR MRC CBBL, YOU MUST ANSWER MRC (CPSF)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAPQ*;CBBLDAPP$$DAPF*)
| Table 1 |
| Reply Code (AN47) | Reply |
| APE | ADJUSTABLE TRIP RELEASE |
| APF | CURRENT LIMITER |
| APG | CURRENT LIMITER ACCOMMODATION |
| APT | GROUND FAULT PROTECTION |
| APH | HANDLE LOCK |
| BQG | HIGH INRUSH PROTECTION |
| APJ | INTERCHANGEABLE TRIP RELEASE |
| APK | KEY INTERLOCK |
| APL | NEUTRAL POLE, GROUNDED |
| APM | NEUTRAL POLE, INSULATED-GROUNDABLE |
| APN | NEUTRAL POLE, SWITCHABLE |
| APP | OFFSET HANDLE EXTENSION |
| APQ | PADLOCK ATTACHMENT |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| APR | SLIDING BAR INTERLOCK |
| CCZ | TRIP INDICATOR |
| APS | WALKING BEAM INTERLOCK |
CPSF*JADJUSTABLE TRIP SETTING CURRENT RANGE PER POLE IN AMPS
THE MINIMUM AND MAXIMUM VALUES OF CURRENT TO WHICH AN ADJUSTABLE TRIP SETTING DEVICE MAY BE SET PER POLE,EXPRESSED IN AMPERES.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(CPSF3AEEJCM32.0/P50.0*;CPSF3AEEJCM32.0/P50.0$$JC*;CPSF3AEEJCM32.0/P50.0$JCM32.0/P50.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CJU | FIRST LOCATION |
| 3CJV | SECOND LOCATION |
| 3CJW | THIRD LOCATION |
| 3CKF | SINGLE LOCATION |
| 3CKG | ALL LOCATIONS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
IF STYLE/REPLY CODE(s) P WERE ENTERED FOR MRC RADC, YOU MUST ANSWER MRC (RADD)
RADC*DRADIOACTIVE CONTENT
AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.
Enter the applicable reply code from the table below
(RADCDP)
| Table 1 |
| Reply Code (AN54) | Reply |
| P | CONTAINS RADIOACTIVE MATERIAL |
RADD*JRADIONUCLIDES DATA
THE NAME AND AMOUNT OF THE RADIONUCLIDE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(RADDJJFAAHF2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| JF | CURIES |
| JH | MICROCURIES |
| JG | MILLICURIES |
| Table 2 |
| Reply Code (AN55) | Reply |
| AAGG | PHOSPHORUS (15) P-32 |
| AAHF | RADIUM (88) RA-223 |
| AAHG | RADIUM (88) RA-224 |
| AAHH | RADIUM (88) RA-226 |
| AAHJ | RADIUM (88) RA-228 |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
APNQ*DARC QUENCHING METHOD
THE MEANS OF QUENCHING AN ARC.
Enter the applicable reply code from the table below
(APNQDAL)
| Table 1 |
| Reply Code (AK63) | Reply |
| AB | AIR |
| AH | AIR BLAST |
| AJ | DEION |
| AK | MAGNETIC BLOWOUT |
| AL | OIL BLOWOUT |
AEFP*JNONTURN DEVICE RADIUS
THE LINEAR MEASUREMENT OF THE DISTANCE FROM THE ACTUATOR CENTERLINE TO THE CENTERLINE OF THE NONTURN DEVICE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEFPJAB2.0*;AEFPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEFQ*JNONTURN DEVICE LENGTH
THE MEASUREMENT OF THE DISTANCE THAT THE NONTURN DEVICE PROTRUDES ABOVE THE MOUNTING SURFACE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEFQJAB2.0*;AEFQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEFR*JNONTURN DEVICE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A NONTURN DEVICE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEFRJAB2.0*;AEFRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEFS*JNONTURN DEVICE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A NONTURN DEVICE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEFSJAB2.0*;AEFSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAW*;BBRGDAK$DAR*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AB | ABOVE GROUND MAGAZINE |
| AC | CLOSED SHED |
| AM | DEHUMIDIFIED WAREHOUSE |
| AT | DOCK LEVEL HEATED WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AS | GROUND LEVEL HEATED WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AF | IGLOO MAGAZINE |
| AG | IMPROVED OPEN |
| AH | OPEN SHED |
| AR | SHED |
| AJ | UNHEATED WAREHOUSE |
| AK | UNIMPROVED OPEN |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAE*;BBRJDAQ$$DAK*)
| Table 1 |
| Reply Code (AM83) | Reply |
| AE | FRAGILE |
| AK | MAGNETIC |
| AQ | PILFERABLE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAUA000*;PRMTDRTA000$DRHA000*;PRMTDRTA000$$DRHA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000F2.0*;PMWTJRTA000F2.0$JRTA000F2.0*;PMWTJRTA000F2.0$$JRTA000F2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$JIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
BBRH*JINSPECTION FREQUENCY
THE SPECIFIED TIME INTERVAL,FROM RECEIPT,NECESSARY TO DETECT MATERIAL DETERIORATION THAT WILL AFFECT STOCK READINESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BBRHJMHAB2*;BBRHJMHAB2$$JMHAB3*)
| Table 1 |
| Reply Code (AH68) | Reply |
| MH | MONTHS |
| YR | YEARS |
| Table 2 |
| Reply Code (AM82) | Reply |
| AB | FIRST INSPECTION |
| AC | REINSPECTION |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDF)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
PKDW*JPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM OF SUPPLY AND ITS CONTAINER.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PKDWJOZ2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| GM | GRAMS |
| KG | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ027)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ027 | IRIDIUM |
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(SHPNAR1)
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.
Enter the alpha-numeric reply with a minimum of one character.
(DENNAR1)
WLBL*ADOT WARNING LABEL CODE
THE WARNING LABEL CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PACKAGE OR CONTAINMENT DEVICE OFFERED FOR TRANSPORTATION OF A HAZARDOUS MATERIAL WHICH MEETS ONE OR MORE HAZARD CLASS DEFINITIONS IN ACCORDANCE WITH THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE. THIS MRC HAS BEEN DISCONTINUED WITH NO REPLACEMENT - THIS INFORMATION IS NOT CHARACTERISTIC INFORMATION, THIS INFORMATION NEEDS TO BE INPUT IN SEG G OF THE TIR.
Enter the alpha-numeric reply with a minimum of one character.
(WLBLAR1)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)